PROVN OF BOUNDARY WALL OF OFFR MD ACCN AND SIG REGT UNDER GE(U) MEERUT AND GARBAGE PIT NEAR OR MESS AT SIG REGT UNDER GE(U) MEEERUT CANTT

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified.

Removing excavated material ( soils) exceeding 50m and not exceeding 100m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L broken stone or boulder hardcore ( granite/basalt/trap) of gauge n exc. 63 mm , deposited , spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations / mass concrete complete all as specified.

M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in (roof kerbs or mud stops, rounded or cmamfered on edges), water troughs and the like including weathering , slightly rounded or chamfered angles and throating, as directed including necessary formwork complete all as specified.

M&L Brick work with old size fly ash bricks., straight or curved on plan exc 6 m mean radius , built in CM 1:6, complete all as specified and directed.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L Plain cement concrete type C2 (1:3:6), using 40 mm graded crushed stone aggregate,75 mm thick , as in floor finished even and fair complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:6 , top surfaces finished even and smooth without using extra cement complete all as specified.

M&L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick work or on one side of lathing, in cement and sand mortar 1:6 , top surfaces finished even and smooth without using extra cement complete all as specified

M&L preparation of newly plastered surfaces of walls by brooming down and applying two coats of white wash on newly plastered surfaces including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of new plastered / unplastered surfaces of walls and applying two coats with cement base paint , white or tinted over one coat of cement paint primer ( before application of cement base paint) including and washing floors, etc. , of drops and splashes complete all as specified .

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.

m/s gupta construction

mohanlal gupta

Manglam Engineers and Construction Co

Punit Jain

M/S AGARWAL CONSTRUCTION CO.

Jay Ambay Enterprises

Anil Kumar Gupta