Loading
Loading…
Loading…
Cancellation
Cancellation
Minimum Bids Not Received
cancelled_1.pdf
Tender Value
Refer Docs
EMD Value
₹3.2 L
Closing Date
30 Apr 2026, 12:00 pmClosed
SE EM Circle PWD Kanpur
SE EM Circle PWD Kanpur
Janpad Kanpur Nagar me Kalyanpur Vidhaansabaha k Antargat Chidiyaghar Chorahe se karbala marg ke mounighat Chaurahe se Atal Bihari Chouck tak ( Chanez 0.700 se 1.370 kul lambai 0.670 Km) marg prakash Vayvastha ka Karya.
2026_CEEMP_1137401_1
670C/4C-EMC/2026-27 Dt. 07.04.2026
Open Tender
Electronics Equipment
120 days
Kanpur Nagar
3 documents required · 3 mandatory
₹854
EE EM Division PWD Kanpur
₹3.2 L
Yes
EE EM Division PWD Kanpur
8 May 2026
16 Apr 2026
30 Apr 2026
16 Apr 2026
30 Apr 2026
16 Apr 2026
21 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply and fixing of 9 mtr. G.I. Octagonal pole of approved make (top dia 70 mm, Bottom dia 155 mm & Base plate 16 mm thick) having 3 mm, thickness with double arm bracket length of 1 mtr. length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T & P complete in all respect. Arm design will be as per direction of Engineer-in-charge | |||||
| 2Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass/ UV stabilized PC Cover and lenses suitable for 110 Watt to 130 Watt and Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved complete in all respect including Labour. CAT-AAA 13200-15600 system lumens, High Power LED with lenses, 120Lm/W, PF>0.95, THD <10% at full load, CRI >70, Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & >300V auto cut and re-start feature, 4KV internal Surge protection, with 5 years warrantee. Make:- Philips/Havells | |||||
| 3Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. | |||||
| 4Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | |||||
| 5Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. | |||||
| 6Supply and fixing of 5 Amp. To 32 Amp. Rating 240/415 V 10 kA C-Curve MCB for Controling of Street Light DP MCB. | |||||
| 7Supplying and Laying of FRPVC Round Shethed DPMCB copper Conductor flexible cable including making connection street light 21 Mtr. Wire for 2 Nos. Street Light 3 Core 1.5 Sq.mm copper wire. | |||||
| 8Nubering of pole & panel by letter writing | |||||
| 9Supply and fixing of 16 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 4mm. Top dia minimum 150 mm, bottom dia minimum 360mm, base plate 32mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia,double drum winch. including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. | |||||
| 10Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass/UV stabilized PC Cover and lenses built with mandatory driver set suitable for 170 to 200 Watt. Confirming to IP 66, IK 07 and above protection complete in all respect including Labour. CAT-AAA 20400-24000 system lumens, High power LED with lenses, >120Lm/W, P.F.>0.95, THD <10% at full load, CRI >70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & >300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee Make:- Philips/Havells | |||||
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.09 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
BOQ_2123911.xls
BOQ • 0.27 MB
T1.pdf
Tender Documents • 1.36 MB
Download all tender documents and submit your bid