Maintanance of Community Hall at RSA Nagar in Thachanallur Zone, Tirunelveli City Municipal Corporation.

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use.

Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Plain cement concrete of mix 1:4:8 (One Cement, four sand and Eight aggregate) using 40mm ISS HBG metal from approved quarry including cost and conveyance of materials to site and all labour charges etc., complete asper standard specification.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Plastering with Cement Mortar 1:5 mix. using 12mm thick with all cost and convleyance of materials and all labour charges etc., complete as per standard specification (Data 2022-23 SI-44)

Special Ceiling plastering with cement morar 1:3 mix, using 10mm thick with all cost and conveyance of material and labour charges etc., complete asper standard Specification

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats over Old Iron works with ready mixed enamel paint of approved colour and quality including priming coat etc., complete asper standard specification.

Weathering course of concrete borken brick jelly 20mm size in pure slacked lime over RCC roof slab the proportion 32:12.5 (Thirty two Broken Jelly and Twelve and Half Slacked lime) Mix for required depth of 80mm for giving required slope and thickness to roof as required well beaten with wooden beaters etc., complete complying with standard specifications.

Terrace flooring with one course or pressed tiles of size 20cm x 20cm x 20mm laid in CM 1:3 (One cement and three sand) mixed with crude oil 10% by weight of painted with same oiled mortar in all cost of materials and lab our charges etc., complete. as per standard specification.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open PVC conduit Plug point ( 8 points / Coil) Higher End. SD361

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with suitable Module Plastic surface mounting switch box on wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open PVC pipe power Plug point ( 8 points / Coil) Higher End. SD381

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End SD305

Supply and fixing of LED light 20W 4 Feet with LED Fitting (SD 88)

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 600mm down rod with fan clamp with side plates and cross arm of size 450mm (18"). SD561

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying of following pipes and specials including cost and conveyance of all materials etc., complete as per standard specification.

25mm PVC Pipe

25mm PVC Coupler

25mm PVC Elbow

25mm PVC Bend

25mm PVC Union

25mm PVC MTA

25mm PVC FTA

25mm PVC Tee

25mm PVC Shoe

25mm PVC Ball Valve

32mm PVC Pipe

32mm PVC Coupler

32mm PVC Elbow

32mm PVC Bend

32mm PVC Union

32mm PVC MTA

32mm PVC FTA

32mm PVC Tee

32mm PVC Shoe

32mm PVC Ball Valve

25 x 20mm Reducer

25 x 20mm Reducer TEE

25 x 20mm Reducer Elbow

PVC Adhesive (Solution) - 100 Grm

Shellac - 100 Grm

Thread Ball

Wooden Plug, Clamp and Screws

Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type)

110mm PVC Pipe

110mm PVC Coupler

110mm PVC TEE

110mm PVC bend

110mm PVC Elbow

110mm PVC Shoe

110mm PVC Y

110mm PVC Door Elbow

110mm Vent Cowl

PVC Tank - 1000 Lit

Labour (Plumber: 1-Skilled, 1-Semi Skilled)

Painting and lettering arrangements for using best and approved colour including all cost and conveyance of materials to site and all labour charges etc., complete as per standard specification.