Repair/Replacement of HT cable, 11 KV straight through joint kit of Pump House No.06 to Pump House No.05 and other connected works at Fort Cantt, Allahabad

Amount

Taking out the old unserviceable HT UG cable of any size from the trenches complete all as specified and directed by Engr-in- charge. Note : Excavation and earth work shall be measured and paid separately inrespective items.

Excavation in trenches/pits in any type of soil(soft/loose/ hard/dense) not exceeding 1.5 m wide and not exceeding 1.5 m deep and getting out complete all as specified and directed.

Returning, filling in with the earth obtained from item No.02 here-in-before including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply and laying Sub class 'B' bricks(old size) laid flat in trenches as cable covers complete all as specified & directed.

M&L for clean and dry sand (unwashed) in trenches around the cable for cushioning complete all as specified & directed. Note :- Sand cushioning 8cm before laying the cable and 15cm after laying the cable & punned down 18cm,and punned thickness shall be measured and paid.

Supply,laying,testing and commissioning in trenches/under floor/under road XLPE insulated cable screened PVC heavy duty with aluminium conductor,11000 Volt grade (earthed) of cross section area 95 Sqmm,3 core complete all as specified & directed.

Supply and fixing heat shrinkable,straight through joint box for XLPE HT U/G cable,11KV grade suitable for cross sectional area 95Sqmm 3 core XLPE out door type XLPE cables complete all as specified and directed.

Supply and replacement pin type insulator,porcelain,vitreous, white brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut,150 mm height and 150mm dia suitable for working pressure 11000 volts grade complete all as specified and directed.

Supply and replacement disc type insulator,porcelain, vitreous,white brown or green,145 mm high and 255mm dia ball and socket type single disc assembly for tension with tension clamps for conductors,working pressure 11000 volts grade complete all as specified and directed.

M/L for cutting triming and vending tree branches along HT/LT over head lines after arranging electrical shut down, including taking all precautions while working on lines contractr using own T&P by the contractor complete all as specified and directed, (For taking shut down to excute the work min one skilled electrician and four mazdoor for 8 houres/day shall be depolyed on the work).

Carrying Cable fault locating machine from city workshop to site and detecting fault of defective 11 KV HT under grounding cable of any size complete all as specified & directed by Engineer in charge.

M&L for cutting of shrubs and bushes including surface dressing not exceeding 15cm deep in soft/loose soil including cutting and removal of unwanted grass hard/dense article / small trees and surrounding area of HT fault location complete all as specified and directed.

SCHEDULE OF CREDIT (i) Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items. (ii) The quoted rate sum will be arrived after deducting amount of Schedule of credit from the total amount of the BoQ.

Old U/S HT cable joint of any size

Old U/S 'B' bricks

Old U/S XLPE cable 3 core 95 Sqmm

Old U/S Disc/Pin insulator any size

TECH-NIG COMPUTERS

PRABHAWATI ENTERPRISES