REPAIR OF JOINERY FLOORING PLASTERING SANITARY FITTINGS ETC AT SONEGAON NAGPUR

Amount

Taking down chowkats with shutter (without taking of shutter from frame) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.

Taking down chowkats with shutter (without taking of shutter from frame) area not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down shutter of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and as directed.

M & L for demolition of cement concrete (un reinforced )in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in sub base of flooring complete all as specified and as directed.

M & L for taking down unserviceable 20mm bore GI steel water tubing and connections, fittings complete all as specified and as directed.

All as per Item No 6 here in before , but 15mm bore complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors laid over 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed Ceramic colour tiles 7 to 8 mm thick on vertical surfaces such as skirting/dados including back coat of plaster in CM 1:3 , 10mm thick complete all as specified and as directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm,laid over 20mm thick screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick on vertical surfaces such as skirting/dados including back coat of plaster in CM 1:3 10mm thick complete all as specified and as directed.

M & L for cutting channels, grooves or rebates without reinforcement exceeding 15 cm but not exceeding 30cm girth, and trimming surface complete all as specified and as directed.

S&F steel water tubing medium grade 15mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors complete all as specified and as directed.

All as per Item No 14 here in before , but 20mm bore complete all as specified and as directed.

Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests including provision of lime concrete bedding complete all as specified and as directed.

S & F in repairs Vitreous china wash water closet pan ( Pedestal pattern) white fixed in floor including trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and as directed.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including connection to water pipe and seat complete all as specified and as directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm including bracket fixed to wall complete all as specified and as directed.

M&L for 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm dia Chromium plated fancy type Stop valves, castcopper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: clamps; hold fasts; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side complete all as specified and as directed.

S&F 35mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side complete all as specified and as directed.

S&F 100mm size butt hinges mild steel medium weight cold rolled complete all as specified and as directed.

All as per Item No 30 here in before , but 75mm size complete all as specified and as directed.

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250mm long Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and as directed.

All as per Item No 33 here in before , but 300mm long complete all as specified and as directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F for 150mm long aluminum handles, cast type, anodized complete all as specified and as directed.

S&F165X60mm Pressed steel frames for doors with double rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed.

S&F 2nd class hard wood 30mm thickness Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and as directed.

M &L for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in block for hold fast block or similar work and finished the surface with existing and including form work complete all as specified and as directed.

M & L for hacking out old broken glass any thickness, size quality or description from steel frame fixed with metal pinning and S&F 4 mm thick frosted glass with putty (in metal frames etc).complete all as specified and as directed.

M & L for hacking out old broken glass any thickness, size quality or description from steel frame fixed with metal pinning and S&F 4 mm thick sheet glass with putty (in metal frames etc). complete all as specified and as directed.

S&F sheet glass ordinary quality 3mm thick quality with oil putty in sequence not exceeding 0.5 sqm in each pane complete all as specified and as directed.

S & F aluminium section, powder coated as in windows / ventilators / doors with movable or fixed type shutter of any size. Aluminium section medium weight of suitable size of series 'B', cut to size / length, jointed together including all necessary fitting, rubber beading for aluminium sections and for fixing glass and all necessary fitting, locking arrangement complete all as specfied and directed.

S & F, 5.5 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed

Taking down aluminium doors /window shutter and refix in same position including making good by replacing its old parts/fittings make it smooth functional complete all as specified and as directed.

M&L for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and as directed.

M &L for preparation new steel and iron surfaces not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of primer of red oxide complete all as specified and as directed.

M&L for one coat of synthetic enamel paint on old painted wooden surface including preparation of surfaces complete all as specified and as directed.

M &L for preparation old steel and iron surfaces not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.

S&F in repair Aluminium(extruded body section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repair Aluminium(extruded body section) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 700 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

S&F 2nd class hardwood 30mm thickness of shutter Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

M & L for dismantling of False ceiling (Fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and as directed.

S&F false ceiling of size 605mmX605mm Anodised aluminium snap grid frame work for false ceiling with fixing Gypsum Board 12mm thick in ceiling fixed as per manufacturers instructions complete all as specified and as directed. Note:- Cost of making frame work for light fitting, grills, difusers cutouts etc is deemed to be included in the quoted rate.

Dismantling existing water tank and S&F rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed Top) hoisted and fixed in position all as specified in SSR Part I, 500 Litres capacity complete all as specified and directed.

All as per Item No 59 here in before , but 1000 Litres capacity complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs and from mouths of circulating pipes etc complete all as all as specified and directed.

All as per Item No 61 here in before , but capacity exceeding 250 ltrs and not exceeding 500 ltrs complete all as specified and directed.

SRI JD CORPORATION

Alert Multipurpose Services