Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.2 Cr
EMD Value
₹2.0 L
Closing Date
20 Jan 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Anandkumar S Zalaki
Proposed Construction of Mini Business Center at Super market in W No-14 Dharwad division
DMA/2023-24/OW/WORK_INDENT6899
DMA/2023-24/OW/WORK_INDENT6899
Open
Other Works
Two Tender Document System(Two Cover)
DMA City Corporation Hubballi-Dharawada
13 documents required · 13 mandatory
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of works for which tenders already submitted
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Work Done Certificates for the Work performed as Prime Contractor in the same name on works of similar nature over during the five years specified Similar nature of Work done certificate i.e. 50percent of amount put to tender Tenderer in his name should have in the last five years i.e2018-19 to 2022-23, Satisfactory completed, at least one similar work such as Building work value not less than Rs.50.23 Lakhs in any one year of last five years as mentioned in 3.2 as prime contractor .Executed Min. Rs.17.50 Lakhs electrical work
The Work Done Certificates for the Quantities of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document Executed in any one year in the last five years i.e.2018-19 to 2022-23 the following minimum quantities of work Slno 1.All type of Structural Steel work-6824.96 kg 2.TMT Steel work-3.46 Ton 3.PCC/RCC-78.72 cum 4.Burnt Brick Stone masonry/Cement blocks-46.08 cum 5.Size Stone Masonry/Uncoursed stone masonry-69.68cum 6.Particle board /Laminated work /Vineel Panel board works-669.12 sqm 7.G.S/GI/AC Sheet roofing-386.40 sqm 8.MS door works /rolling shutters /all types of MS works-230.40 sqm
Not Applicalbe
Valid contractor license certificate issued from competent authority in Appropriate Contractor Class
Bidder should upload ITR filed copies of the last five years
Valid PAN Card
Bidder Should be upload the balance sheet for the last five years
Bidder should upload Profit and Loss statement for the last five years.
Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details along with profit and loss statement tallying the Annual Turn Over Tenderer in his name should have in the last five years i.e 2018-19 to 2022-23, achieved in at least two financial years minimum annual financial turnover in all classes of civil engineering construction works only of Rs 100.45 Lakh
Line of Credit i.e. 30percent of amount put to tender obtained from Nationalized Scheduled Banks in Given Pro-forma in the bid document Liquid assets and or availability of credit facilities of not less than Rs.30.13 Lakhs as per BID DOCUMENT The LOC not in the Format as per BID Document Circular No Shall be Rejected
The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (A) Existing commitments and on-going works: along with the details in the format as in the bid document
The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (B) Works for which Tenders already submitted: along with the details in the format as in the bid document
Notary Self Attestation regarding Agreed to Terms and Conditions as per (bid document) kw4on face value of Stamp Paper Rs20
Notary Affidavit Declaration that the bidder has not been blacklisted
Valid GST Registration Certificate
₹2,990
₹2.0 L
9 Jan 2024
9 Jan 2024
22 Jan 2024
12 Jan 2024
10 Jan 2024
Proposed Construction of Mini Business Center at Super market in W No-14 Dharwad division
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing and removing of all types formwork,centering & Scaffolding,shuttering, strutting, propping etc.,for RCC Work for all thickness including cost of all materials, labour complete as per specifi...
Providing and removing of all types formwork,centering & Scaffolding,shuttering, strutting, propping etc.,for RCC Work for all thickness including cost of all materials, labour complete as per specifi...
Providing and removing of all types formwork,centering & Scaffolding,shuttering, strutting, propping etc.,for RCC Work for all thickness including cost of all materials, labour complete as per specifi...
Providing and removing of all types formwork,centering & Scaffolding,shuttering, strutting, propping etc.,for RCC Work for all thickness including cost of all materials, labour complete as per specifi...
Providing and removing of all types formwork,centering & Scaffolding,shuttering, strutting, propping etc.,for RCC Work for all thickness including cost of all materials, labour complete as per specifi...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Ty...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying 60mm thick factory made cement concrete paver
block of approved shape and colour of M -30 grade made of C&D waste
by block making machine with vibratory compaction laid in require...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing & fixing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G....
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...
Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in...
Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in...
Points Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Ear...
Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...
Wire: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specif...
PVC modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl...
PVC modular box: Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl...
modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete...
modular Switch Plate Supplying and fixing superior quality modular switchmounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete...
Modular switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.1)6Amps one way switch.PWD,Elct, SR 2023-24 Page No. 8 ITE...
Modular socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.3.6.3)6Amps 3way socketPWD,Elct, SR 2023-24 Page No. 9 ITEM co...
Ceiling Rose Supplying and fixing/replacing of 6/16/32Amps electricalaccessories on existing switch board.3.14.5) 6 Amps Ceiling RosePWD,Elct, SR 2023-24 Page No. 10 ITEM code 3.14.5
Batten Holder Supplying and fixing/replacing of 6/16/32Amps electricalaccessories on existing switch board.3.14.7)6A Batten HolderPWD,Elct, SR 2023-24 Page No. 10 ITEM code 3.14.7
RCCB Switch Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. .5.20.1) 16-25 A 2 pole PWD,Elct, SR 2023-24 Page No. 18...
MCB Switches. Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circu...
MCB distribution boards Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps bolts,nuts etc., with provision for fixing suitable type capaci...
Grounding Material Pipe Grounding GI grounding Pipe,B-class,42mm dia,2.5mtr long 3.2mm thick with bolt,nut,GI strips and washer compleete.Minimum weight of GI pipe:7.3kg.ESCOMS SR 2023-24 page No 22 I...
Good Quality well burnt charcoal for grounding purposes packed in non returnable gunny bag of 30 kg each .ESCOMS SR 2023-24 page No 22 Item No 51.02
Good Quality salt for grounding purposes packed in 50kg gunny bag .ESCOMS SR 2023-24 page No 22 Item No 51.03
Electronic Trivector Meter Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter PWD,Elct, SR 2023-24 Page No. 19 ITEM cod...
MSbox Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, e...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint PWD,Elc...
Supplying 250 amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying of on load change over switches 4 poles, AC 23A Duty, 415V 100 A PWD,Elct, SR 2023-24 Page No.15 ITEM code 5.11.2
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. 5.38 PWD,Elct, SR 2023-24 Page No.19 ITEM code 5.38
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.1)16AmpsPWD,Elct, SR 2023-24 Page No. 14 ITEM code 5.7.1
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screwsPWD,Elct, SR 2023-24 Page No....
U G Cable 1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554(part-1 )or IS-7098 Part 1,Armouring strip thickness and resistivity as per IS-3975 32...
Laying of cable in Existing Trench/GI pipe/Stoneware/RCC Hume pipe using wooden/Aluminium Rollers as directed by department staff. 35 to 95 Sqmm. BESCOM SR 2023-24 page No 52 Item No 21.06
Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...
Lugs Heavy Duty Copper Terminal Long Barrel 63.02)35 Sqmm Copper Terminal, Apprx Wt: 17 GmBESCOM SR 2023-24 Item No 59.02 Page No.26
PVC Pipe-40mm dia Supplying heavy gauge PVC conduit pipe . dia . mmthick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woodplugs in case...
DP Set(2 Pole Strucrure Kit) as per IS-1977For RCC Pole- 9Mtr Long, 145KG WL/PSCC Pole-9MtrLong,300KgWLMS(DwgNo.BESCOM/GM/QS&S/35 & 63 Dtd24.11.2018) I No.26.01/Page No.12
RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 ESCOM SR 2023-24 I No.1.01/Page No.3
Insulator as per IS-1445 for Ceremic, IS 7935 for GI Pin, IEC-61109 for Polymeric , for GI Pin 11 kV, 45 kN Polymeric Insulator ESCOM SR 2023-24 I No.6.10/Page No.5
Guy Clamp - GI ESCOM SR 2023-24 I No.5.10/Page No.5
Turn Buckle (GI) (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) ESCOM SR 2023-24 I No.5.11/Page No.5
Anchor Rod using 12 mm rounds/Guy Rod - GI ESCOM SR 2023-24 I No.5.13/Page No.5
Guy Wire & GI Wire as per IS-2141 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/KM ESCOM SR 2023-24 I No.8.01/Page No.5
No. 15 Strain Insulator ESCOM SR 2023-24 I No.6.08/Page No.5
Spiral Earth Electrodes ESCOM SR 2023-24 .I No.2.16/Page No.4
Caution/Danger Board ESCOM SR 2023-24 I No.68.17/Page No.3
Anti Climbing Device GI Barbed wire (12 Mtr/Kg)
ESCOM SR 2023-24 I No.4.02/Page No.4
11 kV, 200 Amps Single Break GOS, Vertically Operated ESCOM SR 2023-24 I No.24.03/Page No.11
H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS ESCOM SR 2023-24 I No.24.06/Page No.11
11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification ESCOM SR 2023-24 I No.25.01/Page No.12
Insulator as per IS-1445 for Ceremic, IS7935 for GI Pin, IEC-61109 for PolymericDISC Insulator 45 kN Porcelain ESCOM SR 2023-24 I No.6.09/Page No.5
Insulator as per IS-1445 for Ceremic, IS 7935 for GI Pin, IEC-61109 for Polymeric ,11 kV, 70 kN Composite/Polymeric Insulator ESCOM SR 2023-24 I No.6.11/Page No.5
Cross Arms (MS & GI) as per IS-1977 ,11 kV, Special 3 Pin Cross Arm - GI ESCOM SR 2023-24 I No.2.04/Page No.3
ACSR Conductor as per IS-398 (Part - 2/1996), Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM I No.7.02/Page No.5
Erection of 2 Pole Structure using RCC/PSCC Pole 9 to 10 Mtr long ESCOM SR 2023-24 I No.2.06/Page No.43
Erection of Poles Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth ESCOM SR 2023-24 I No.2.02/Page No.43
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Digging of Pit Digging of Pit 1.8Mtrdepth for errection of9 to10 MtrLongSteel/RCC/PSCC supports as perapproved Drawing Ordinary Soil ESCOM SR 2023-24 I No.1.1.1/Page No.43
Digging of Pit for GUY SET Ordinary Soil ESCOM SR 2023-24 I No.1.7.1/Page No.44
Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)using 2...
Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,)ESCOM SR 2023-24 I No.2.08/Page No.44
Fixing Danger Board ESCOM SR 2023-24 I No.5.15/Page No.45
Fixing of GI Barbed Wire (12 Mtr)ESCOM SR 2023-24 I No.5.09/Page No.45
Fixing of GOS including wiring (11 kV Single Break 400 Amps)ESCOM SR 2023-24 I No.13.02/Page No.48
Erection of H-Frame.ESCOM SR 2023-24 I No.2.09/Page No.44
Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring ESCOM SR 2023-24 I No.13.01/Page No.48
Stringing of conductor Rabbit binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.ESCOM SR 2023-24 I No.6.02/Page No.46
Double Pole TC Set for erection ofTransformer on RCC/PSCC 9 Mtr LongPoles as per IS-1977For 100/300 kVA 4/5 Star Rated Transformer onRCC Pole - 9 Mtr Long, 145 Kg WL - MS ESCOM SR 2023-24 I No.21.07/P...
Insulator as per IS-1445 for Ceremic, IS 7935 for GI Pin, IEC-61109 for Polymeric11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)ESCOM SR 2023-24 I No.6.06/Page No.5
Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 250 kVA, Aluminium Wdg, Star 2 (5 Star ESCOM SR 2023-24 I No.12.08/Page No.7
Guy Wire & GI Wire as per IS-2141 8 SWG GI Wire (4.064 mm Dia), Std Wt: 125 Kg/KM ESCOM SR 2023-24 I No.8.01/Page No.5
Lightning Arrester as per IEC-60099-4 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR ESCOM SR 2023-24 I No.19.02/Page No.9
LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal) (Dwg No. BESCOM/GM/QS&S/08 Dtd 24.11.2018)ESCOM SR 2023-24 I No.18.02/Page No.9
1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 PVC Wire - 240 Sqmm Al Wt: 63.5 Kg, Total Wt: 87 Kg/100 Mtr Coi ESCOM...
Heavy Duty Copper Terminal Long Barrel 240 Sqmm Copper Terminal, Apprx Wt: 218 Gm (I No.59.10/Page No.27)
PG Clamp Rabbit to Insulated Wire 240 Sqmm (Dwg No. BESCOM/GM/QS&S/43 Dtd 24.11.2018) ESCOM SR 2023-24 I No.10.5/Page No.6
LT Line Spacer For TC Wiring (Dwg No. BESCOM/GM/QS&S/38 Dtd 24.11.2018)ESCOM SR 2023-24 I No.31.03/Page No.13
LT Line Spacer For TC Wiring (Dwg No. BESCOM/GM/QS&S/38 Dtd 24.11.2018)ESCOM SR 2023-24 I No.5.15/Page No.5
LT Metering Box for housing the ETV Meter without CT's busbar wiring et ESCOM SR 2023-24 I No.55.04/Page No.25
LT Current Transformer, 3.75 VA, Ring type as per IS-2705 Part-1&2 CT Ratio - 400/5A, 0.5 Accuracy Class ESCOM SR 2023-24 I No.56.11/Page No.26
LT 3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering ESCOM SR 2023-24 I No.53.05/Page No.23
11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)ESCOM SR 2023-24 I No.20.01/Page No.9
11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)ESCOM SR 2023-24 I No.24.01/Page No.11
Clamps A Type (MS & GI) as per IS-1977, RCC Pole Clamp - MS(Dwg No. BESCOM/GM/QS&S/30 Dtd 24.11.2018) ESCOM SR 2023-24 I No.5.02/Page No.4
Erection of 200 - 250 kVA Transformer on Transformer Structure ESCOM SR 2023-24 I No.8.03/Page No.46
Digging Digging of Pit for providing GI Pipe type Earthing ESCOM SR 2023-24 I No.1.6.1/Page No.43
Fixing of 3 Nos Lightning Arrestor including wiring ESCOM SR 2023-24 I No.13.06/Page No.48
Distribution Box for DTC Fixing LT Distribution box for 100/250/500 kVA DTC (Excluding wiring ESCOM SR 2023-24 I No.9.07/Page No.47
Fixing 1 Circuit of LT Wiring for 250/500 kVA Transformers via metering box. (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc)ESCOM SR 2023-24 I No.15.06/Page No.49
Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC ESCOM SR 2023-24 Item No.11.03/Page No.47
Fixing 3 Phase Energy Meter to IP Sets fixed in Pump House ESCOM SR 2023-24 Item No.19.02/Page No.51
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Earth work Excavation for cable trenchof 0.5 to 0.75mtr width & depth up to 1mtr including trial pits,depositing on bank up to a lead of 50 mtr.Supplying & Displaying necessary danger boards & Lightin...
11 kV, 3x95 Sqmm XLPE UG Cable ESCOM SR 2023-24I No.36.01/Page No.15
Cable Termination Kit Outdoor HS Type Suitable for 95 Sqmm Cable ESCOM SR 2023-24 I No.45.07/Page No.20
Cable Termination Kit Indoor HS Type Suitable for 95 Sqmm Cable ESCOM SR 2023-24 I No.45.04/Page No.20
Cable covering tiles 250x125x40 mm per 1000 no=Rs.10255/-One Each=10255/1000=Rs.10.25 ESCOM SR 2023-24I No.68.03/Page No.32
Artificial/Manufacture Sand ESCOM SR 2023-24 I No.1.2.3a/Page No.54
RCC Hume Pipe, 2000 mm Long, 150 mm Dia ESCOM SR 2023-24 I No.68.01/Page No.32)
Collars for RCC Hume Pipe ESCOM SR 2023-24 I No.68.05/Page No.32
Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @...
Route and Joint Indicating Stones ESCOM SR 2023-24I No.68.08/Page No.32
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff ESCOM SR 2023-24 I No.21.01/Page No.52
11 kV AB Cable Termination installation for 3 Core ESCOM SR 2023-24 I No.24.33/Page No.55)
Covering the cable with tile ESCOM SR 2023-24I No.27.01/Page No.56
Spreading Sand and forming with Sand round the cable ESCOM SR 2023-24 I No.28.09/Page No.56)
Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete ESCOM SR 2023-24 I No.28.06/Page No.56
Laying of GI Pipe ESCOM SR 2023-24 I No.28.08/Page No.56)
Fixing of Route Joint Indicating Slab ESCOM SR 2023-2 I No.27.02/Page No.56
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
6899 new kw4.docx
Tender Document • 1.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .