RE-CARPETING OF VARIOUS ROAD AND PARKING UNDER JURISDICTION OF ROAD SUB DIVISION NO. 5 M.C, CHANDIGRH FINANCIAL YEAR 2026-27 (V-5 Roads Sector 20, V - 6 Road Sector 20 A, B, C and 30A, Parking Sector 20 and 30)(Ward 18)

Scarrifying/Dismantling of SDBC/Bitumen concrete with latest mechanical means i.e diamond cutter automatic milling machines complete in all respect including credit of material and disposal of dismantled material with a (average) lead of 10 km( outside of Chandigarh) and to the entire satisfaction of the Engineer-In-Charge.

Carriage of material (1.1.5) By Mechanical Transport including loading unloading and stacking complete in all respect using appropriate labour and machinery to carry and dispose the sand, stone aggregate below 40mm normal size average lead of 25km and all lifts to entire satisfaction of Engineer in charge (DSR 1.1.5-2021)

Providing and applying primer coat with bitumen emulsion RS on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means complete as per MORT&H specifications (5th edition) to the entire satisfaction of Engineer in charge.

Providing and applying tack coat using hot straight run bitumen of grade VG-10 Bulk @ 2.5 Kg per 10 Sqm including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surfaceas per clause 503 of MORT&H specifications. complete in all respects to the entire satisfaction of Engineer In-charge.

Providing and applying tack coat using hot straight run bitumen of grade VG-10 Bulk @ 3 Kg per 10 Sqm including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surfaceas per clause 503 of MORT&H specifications. complete in all respects to the entire satisfaction of Engineer In-charge.

Providing and laying 20mm thick open graded premix surface with batch type HOT Mix Plant using crushed aggregates confirming to Grading 2 of Table 500-15 premixed with straight run bitumen VG-10 (60/70 grade) @ 1.46 kg per sqm minimum (by wt. of total mix), transported to site laid with paver finisher to required grade, level and alignment, rolled with smooth wheeled/vibratory/static roller to achieve the desired compaction and density of 2.3 gm/c.c. complete as per Clause 508 of MORT&H specifications (5th revision).

Providing and laying 30 thick Bituminous Concrete with 100/120 TPH batch type Hot mix plant producing an average output of 75 tonne per hour using crushed aggregates of specific grading-II with Bituminous binder @ 5.5%(by wt. of total mix) laying with hyrostatic paver finisher with sensor control to required grade level and allignment, rolling with smooth wheeled vibrator and tendom rollers to achive the desire compaction as per MORT&H specification Clause 509 complete in all respect (5th revision).

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specifñad shade colour using not material by fully semi thermoplastic automatic thermoplastic paint applicator machine fitted with profile shoe glass beads dispenser, propane tank heater and proffle shoe heater, driven by experienced operator on road surface including cost of material surface labour T&P, cleaning the road dirt, seals oil, grease foreign material etc complete as direction Engineer-in-charge and accordance with applicable specifications. (DSR 18.62)