PERIODICAL SERVICES TO CERTAIN BUILDINGS, REPAIRS TO SECURITY WALL, FENCING AND COMPOUND WALL, REPAIR TO ROAD AND ROAD SIDE FURNITURE, ROAD BERMS INCLUDING PATH/CULVERTS AT TECH AND RESIDENTIAL AREA AT ADRDE AGRA UNDER GE I RnD DELHI

Amount

M&L for Preparation of old plastered or unplastered, decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil greasy spots and applying two coats of white wash complete all as specified and directed.

All as per item ser No 1.00 above but two coats of white wash on ceiling.

All as per item ser No 1.00 above but one coat of oil bound distemper on wall.

M&L for Complete removal of existing treatment of wall surface including cornices etc and making good to filling holes and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted wooden surfaces exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces exc 10 cm in width or girth and applying one coat of synthetic enameled paint complete all as specified and directed.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices etc and making good to filling holes and applying two coats of cement base paint complete all as specified and directed.

M&L for two coats of french polishing on wooden surfaces of any description width or girth including cleaning and preparing the surface including a coat wood filler on old works with one coat of french polish complete all as specified and directed.

M&L for Obliterating old writing of any description, n exc 0.1 Sqm with synthetic enamel paint to match existing work complete all as specified and directed.

M&L for wiritng letters or figures (Block, Roman, Italic) n exc 30 cm high complete all as specified and directed.

M&L for preparation of old painted surfaces of wall exc 10 cm in width or girth not otherwise described and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for applying 2mm thick wall care putty on walls including preparation of surfaces to making good of undulation complete all as specified and directed.

Taking down cement plaster including raking out joints hacking for key scrubbing down with water or any surface of wall and ceiling built in CM complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces mixed with & including WPC as per manufacturer's instructions finished fair and even complete all as specified and directed. Note:- WPC shall be measured & paid separatly.

All as per item ser No 15.00 above but on other than fair faces.

M&L for 10 mm thick rendering as in patchwork to ceiling/chajjas/soffit/fins & louvers etc in CM 1:3 and finished even and smooth without using extra cement area of each patch n.exc 3 Sqmm each complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paints over a coat of alkali resistance priming paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance priming paint complete all as specified and directed.

M&L for 3 coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for 2 coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

Demolition of brick work or stone/stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15 cm thick(below or above ground) complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and pavings not exceeding 15 cm thick(below or above ground) complete all as specified and directed.

Dismantling of wrought iron work or mild steel work of any description not otherwise provided for fencing complete all as specified and directed.

Dismantling of existing galvanised steel barbed wire complete all as specified and directed.

M&L for brickwork with sub class ‘B’ old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster of any description/layer on brick or stone wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Use and waste of Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including support, overhangs and similar works rough finished surface of concrete flat complete all as specified and directed.

Use and waste of Form work to sides of pillars, post, struts, piers, columns and stanchions rough finished surface of concrete flat square or rectangular or polygonal complete all as specified and directed

M&L for bracket of mild steel angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including ending and welding angles, as necessary, gusset plates, riveting, etc n.exc 10 Kg each brackets conforming to Fe290 Gde E-165 complete all as specified and directed.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed each line wire to be measured.

S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. each line wire to be measured.

M&L for broken glass fixed in CM 1:3 as on top in coping security walls/boundary walls complete all as specified and directed.

M&L for providing 10mm dia TMT bar and over cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item ser No. 35.00 above but 8mm dia as in stirrups and spacers/binder.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregates as in beam, cantilever, bressumers, lintel band, lintel over 1.5m span complete all as specified and directed

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregates as in column, pillars, piers, posts and struts complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick/stone or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing of old painted surfaces of steel of any sescription, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Mild steel work as in doors or gates of angle or other section with gusset plate, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering , running rails and guides) and hanging, also fastening and fixing complete FE-410-w (Gde-E-250) quality A complete all as specified and directed.

S&F Mild steel work as in band straps, supports or stays for rain water pipe, ventilating pipes, including bolts, if required : hooks. Heavy, for large gates, hooks and Pintal Hinges, large hasp and stapples, hand made sliding bolts, clamps, hold hasts wall ties and similar small article etc.conforming to Fe-290 Gde E- 165 complete all as specified and directed.

M&L for preparation of existing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/tack coat with paving bitumen VG-30 at 5 kg per 10 Sqm complete all as specified and directed.

M&L for 30 mm thick (compacted thickness) bituminous semi dense asphaltic concrete using 5.5% binder content by weight of total mix, (VG-30 grade paving bitumen) using mechanical pavers and vibratory rollers of apropriate specifications spread rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for painting lines, dashes, letter, arrows etc on road pavement, by mechanical application of 1.5 mm thick hot thermoplastic road marking (reflective) strips of shade/ colour as directed using automatic application machine including preparation and cleaning of surface complete all as specified and directed.

S&F in repair reflective rods studs pavement markers (cat eye) of category 'A' single mould twin cylindrical shank of not less than 20 mm dia and not less than 30 mm length moulded in body made out of poly carbonate/ABS moulded body to support a loasd or 10 tonnes and reflective panels with micro oprismatic lens capable of providing total internal reflection of the light entering the lens face conforming to the MORTH circular No RW/NH 33023/10/97-DO III fixed to the road surface using proxy resin adhesive supplied by the manufacturer, length, height and width of the body not less than 100 mm, 15 mm and 90 mm and base of flat within 1.3 mm and outermost faces of configuration not deviating more than 1.3 mm from flat surface. Lenses moulded of polycarbonate or methy/methecrylate, area of each retro reflectory surface 35+- degree to the base, installed complete all as specified and directed.

M&L for repair pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in road, paths etc cutting around edges to at least 25 mm in depth, making good by applying evenly tack coat with bituminous primer of paving bituumen Grade VG-30 @ 5Kg per 10 Sqm for laying premix as specified for thin bibuminous carpet (2 cm thick) well rammed and seaoed with premix sand seal coat (6.8 Kg of binder with 0.06 cum of sand) again well rammed (including supply of premix binder and sand) depth of holes n.exc 30 mm complete all as specified and directed.

M/S RADHEY GOVIND ENTERPRISES

rohan traders

VISHESH BUILDERS

CREATIVE CONSTRUCTION