Supply and Delivery of Special Purpose super sucker vehicle mounted suction Machine with blow back mounted on 16 ton GVW(BS VI) Chassis 6000 Litre Tank Capacity Air Flow 1500 Cum/ht in Maraimalai Nagar Municipality

Jet rodder is high pressure water jetting equipment mounted on any LCV chassis like TATA ULTRA EX1918.T BS6 (20 Feet) Chassis. The jetting machine is capable of Dislodging/Removing/Cleaning the Blockage by a bullet nozed back firing Nozzle in the help of High-Pressure water as the Tool METHOD OF SUCTION OPERATION: Suction unit capable of creating vacuum for sucking out slit, slurry, mud, grit, waste water etc. from end application areas like cesspit, sewer line, septic tank, gullies etc. utilizing the exhauster, compressor in the over pressure mode, the sewer contents/materials can also be discharge to the require dumping locationTANK CONSTRUCTION 8000 Lts Tank MS. Tank divided into two compartments The 5000 Lt. Capacity compartment for storage the pure water for entire sewer jetting comion and another compartment of 3000 Litres. For storage the sludge and mud during sucioni operation. The tank constructed by a 6mm thick M.S Plate Water compartment having open type manhole in the top for filling water. The rear sludge compartment has an open type door by the help of door opening cylinders and heavy-duty hand wheel Assy for Sightening door The heavy duty door beading rubber provided for leak proof for sludge compartmers The 4 heavy duty suction and delivery valve provided in the rear of the door for suction delivery operation. The hose reel drum is mounted in the rear door for jetting operation The inside of the entire compartments will be painted with rust prevent Epoxy 5 to 8 degree Sloping Pad provided inside the sludge compartment for Grave and water instead of tipping cylinder. very of sludge HIGH-PRESSURE PUMP Type Horizonal Triplex Plunger type High finish ceramic (0.25 R Piston Horse Power 800 H.P to 100 HP.Flow Rate 269 LPM Max Pressure My. 130 bar two Max 150 Valve seat and valve Gland Packing Stainless Steel Crank Shaft Durable Fiber Impregnated Buna-n Seal Forged Alloy Steel Hardened and ground Lubrication Splash/SAE 20 W040/8 Ltrs Origin Imported (ITALY) FULL TORQUE SPILT SHAFT P.T.OFor Drive PZB/VAS or Equivalent Make HIGH PRESSURE SEWER JETTING HOSE:Make Color Poly Hose or Equivalent make Blue/Yellow/Orange Material Size Length High Reinforced Thermoplastic. 25MM ID, both side 1 BSP Swivel end Pressure 400 Feet (120 Meters) Withstand pressure 3000 PSI 200 Bar EXHAUSTER/COMPRESSOR: Maka Free Air Delivery CFM Imported 480m3/Hour 1266 Power 12 22 HP Mode of Operation Suction and Pressurizing Suction Capacity 18 to 21 Feet VALVES:4 Heavy Duty full port valve suction and Delivery valve for entire suction and dolivery operation HOSES:4 Heavy Duty Suction Hose 6 x 5 Mts. Fitted with 4 Heavy Duty Suction flange clamp and seals. CONTROLS:The entire controls for operation centre P.T.D. (For High Pressure Pump and Hydraulic Pump) and compressor fitted in the in-side of cabin NOZZLES:1 BSP Bullet Nosed Nozzle back firing nozzles 2 nos and 1 BSP Bulet Nosed front and back firing nozzle 2 пов. PAINTING:Two Coats of enamel paint out-side the entire tank (color as per the customer choice). And coats of rust preventive EPOXY coat in-side the tank in-clouding letter writing Take Power from Engine Gear Box.Power One Input Three Output