REPAIRS TO JOINERY, FLOORING, KITCHEN PLATFORM, TOILET MASONRY WORK IN DCA PH-III AND PH-IV UNDER AGE B/R (SOUTH) OF GE(SOUTH) BANGALORE

Amount

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed of 15mm thick in CM 1:6 after dimantiling of old existing floor tiles incl. removal of debris outside of MOD land etc complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) of size up to 0.04 Sqm cut from same shade and size of floor tiles of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4. after dimantiling of old existing floor tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.

S&F Coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat after dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding and removing upto Brick wall surface and removal of rubbish out side the MD land complete all as specified and as directed.

M&L 18-20 mm thick Granite telephonic black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,over a screed of 15mm thick in CM 1:6 ,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed.

S&Fin repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 450mm*600mm complete all as specified and as directed

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 900x750mm x 200mm width of trade pattern complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap complete all as specifed and as directed.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, PVC Collapsible waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair 32 mm dia PVC collapsible waste pipe for Kitchen sink complete all as specified.

S&F in repairs Bib tap cast copper alloy 15mm fancy type ISI marked , Chromium plated with wall flange screwed down, high pressure, with capstan head , screwed down screwed for iron pipe.

S&F in repair, bib taps with wall flange, brass, fancy type ISI marked, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair 15 mm bore diameter brass CP two way bib taps ISI Marked with crutch or butterfly handle and wall flange ,screwed down,screwed for pipe or for brass ferrule.

S&F in repair pillar taps, brass, with capston heads, fancy type, chromium plated ISI marked, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S&F in repairs stop valves 15 mm nominal bore ISI marked, brass, fancy type with wall flange, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed .

S&F in repairs angle valves 15 mm nominal bore ISI marked, brass, chromium plated with wall flange, complete, fixed in repairs, all as specified and directed .

S&F in repairs over head shower ABS chromium plated 95 mm dia with 3 flow with SS over head shower arm of 180mm with flange complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges complete all as specified and as directed.

S&F in repairs 100mm dia PVC (SWR) floor/Nahani trap, CP plain with grating including solvent cement with dismatnling of old nahani trap with necessary PCC/ cement work complete all as specified and as directed.

Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified.

S & F in repair of CPVC pipes 25mm outer dia Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.

S & F in repair of CPVC pipes 20mm outer dia all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F of 20 mm outer dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm outer dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm outer dia female/male brass threaded adapter complete all as specified and as directed.

S&F 25 mm outer dia CPVC gate valve complete all as specified and as directed

S&F of 15 mm CP extension nipple complete all as specified and as directed.

S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling of floor concrete and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling of floor concrete and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC bends any radius 75mm dia

S& F in repair PVC bends any radius 110mm dia

S&F in reapir PVC bends any radius 110 mm dia with access door

S&F in repair PVC bends any radius 75 mm dia with access door

S&F in repair PVC (SWR) 75 mm branch piece,double (double Y) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm branch piece,double (double Y ) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm branch piece,Single (Single Y ) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm vent cowl

S&F in repair PVC (SWR) 110 mm vent cowl

Taking down of steel Windows/Ventilators not exc 1.5 sqm etc and removing from site and disposed out from MD land as sch of credit material complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for ventilators with extruded built up standard rectangular/square section including PVC strips for holding of louvers of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for windows, ventilators with extruded built up standard 3 -track sliding section of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified.

S&F powder coated aluminium sliding window shutter type without sash bars, aluminium sections weighing 0.55 kg/m including powder coating of any colour ,thickness not lessthan 50 microns necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller complete all as specified

S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

S&F sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frameand wooden beading in wooden frame complete all as specified.

M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete.

M&L for 25 mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in floor / roof complete all as specified and directed.

M&L for 10 mm thick screed bed or bedding layer in cement mortar 1:4 on floor/roof /Chajjas surfaces mixed with WPC @ 200 ml per bag of cement finished the surfaces even and fair all as specified and as directed.(WPC will be measured and paid separetly)

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for cleaning the plastered/concrete surfaces of roof with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) M&L 3 mm thick APP modified water proofing memebrane as per IS 16540/16532-2017 weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish laid with 100 mm overlap in lognitudinal and transfer direction over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm including dismantling of old water proofing treatment and roof tiling including screed bed or any type of treatment and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified.

Disconnecting existing tanks exc 250 ltrs and n.exc 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 Note: Brick work is in different locations in very small quantities upto 12.5 m height and contractor have to visit the site before quoting the rate and no claim on this account will be entertained on this account during execution.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in CM 1:4, complete all as specified

M&L rendering 15mm thick in CM (1 :4) on fair faces of brick work or concrete surfaces finshed even and fair and removing rubbish of the premises complete all as specified and as directed.

M&L rendering 15mm thick in CM (1 :4) on fair faces of brick work or concrete surfaces finshed even and fair including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed.

M&L for washing, rubbing and brooming for preparation of existing old decorated wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed.

M&L for 1mm thick wall care putty on plastered surfaces of walls and floors complete all as specified.

M&L for newly plaster surfaces of Wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed.

M&L for newly plastered surfaces of wall and applying two coats of cement based paint over a coat alkali reistance primer ,including preparation of surface and cleaning all window panes from splashes / droppings, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed.

Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm each

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)

M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side as per specification and drawing

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought frame rebated on the solid, rounded or chamfered put together with glue pinned at joints

S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.complete all as specified

S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc, with plain, chamfered or ounded, . fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F stainless steel 100 mm butt hinges ISI marked for doors complete all as specified.

S&F 150 mm size extruded aluminium alloy handles ISI marked for doors fabricated type anodized complete all as specified.

S&F 150 mm long aluminium anodized barrel tower bolts ISI marked for PVC doors and windows of extruded section complete all as specified.

S&F 200 mm long aluminium anodized barrel tower bolts ISI mared for doorsof extruded section complete all as specified.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy fixing with MS nuts and bolts complete all as specified.

S&F for floor door stopper (double) ISI marked of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 4 mm in repairs thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Resecuring or Easing and adjusting without taking down of shuttern. exc 1 Sqm n exc 2 Sqm complete all as specified and as directed

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor)

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded aggregates) as in sub base flooring complete all as specified and directed

M AND V ENTERPRISES

S L R Construction

Srisrinivasaenterprises