SPECIAL REPAIR AND IMPROVEMENT TO BLDG NO P-1 TO P-3 AND P-59 (16 QTRS) OR MD ACCN OF GE DRONACHAL

Amount

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced.

Demolition of cement concrete in any description including floor finishes complete all as specified and directed

Taking down cement plaster of any description from brick wall surfaces etc including raking out joints and hacking for key, scrubbing down with water etc complete all as directed.

M&L for Rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick/ concrete work surfaces complete all as specified and directed.

M&L, for rendering 15mm thick (5mm thick in CM 1:4 with WPC and 10mm thick in CM 1:6) on fair faces of brick work or on concrete surfaces external surface finished even and smooth without using extra cement all as specified. Note: WPC shall be measured & paid separately.

M&L for rendering 5mm thick on fair faces of ceiling/ chajja concrete surfaces in cement mortar 1:4 complete all as specified & directed.

Supply only Integral water proofing compound

M&L for 75mm PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection and hard standing complete all as specified and directed.

M&L for providing cement concrete type B0 1:2:4 (Using 12.5mm graded crushed stone aggregate) as in coping to chajja tops and all other similar works complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base and all other similar works complete all as specified and directed.

M&L for 100 mm thick hard core gauge broken stone or boulders exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)

M&L for coloured chemical treated machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade laid over sand cushioning all as specified and directed.

M&L for sand cushning including watering and consolidation all as specified and directed

M&L for 110MM dia PVC (SWR) pipes single socketd, in any length with rubber ring joints laid in trenches or in floors all as specified and directed

M&L for chequered coloured tiles ceramic tiles of size 300 cm x 300 cm x 9-10 mm thick set, jointed and pointed in neat cement slurry (with gray cement and pigment) and including 20 mm thick screed bed in CM (1:4) for fixing of tiles complete all as directed.

S&F as in repair vitreous China squatting pan, ' Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F, in repair light coloured vitreous china WHB white oval shape of 500mmx400mm (minimun) on new brackets excluding taps, waste china & plug including bracket etc complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F CP brass Chromium plates angle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified.

S&F PVC connection 15mm size PTMT nuts of length 450mm.

S&F fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15 mm bore fancy type complete all as specified.

S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F, in repair CP brass fancy type stop cock with long shank, concealed type all as specified and directed.

S&F in repair grating square 150mm size of PTMT (minimum 100 gms).

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in reapir for 20mm dia Draphary curtain rod decorative wooden finish type over mild steel tubing incl nobs complete all as specified and directed.

S&F sink made of stainless steel 1 mm thick kitchen or laborary with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm and including coupling and waste pipe complete all as specified and directed.

S&F in repair stainless steel plate rack complete assembled set of (Size: 31 x 36 x 10 inch) fixed with screws as specified and directed

S&F in repair tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90 gms).

S&F in repair shelf of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats (Minimum weight 300 gms).

S&F in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.

Dismantling of cast iron 100 mm dia pipe jointed in cement mortar.

Dismantling of cast iron 75mm dia pipes jointed in cement mortar.

S&F cast iron soil waste sand cast and vent pipes 100 mm in any length with or without ears with cement joints fixed to wall.

S&F cast iron soil waste sand cast and vent pipes 75 mm in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

S&F CI Bends (any radius) with duck's foot or heet rest of size 75mm complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal) ordinary in inverted (spigot or socket type) or with parallel branch for 100 mm bore in repairs complete all as specified and directed.

S&F CI bends 100 mm dia bore any radius diminishing piece or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm cast iron cowls.

S&F stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts securing ends of stays to wall or roof dia 100 mm fixed as in repair complete all as specified and directed.

M&L for preparation of old painted cast iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coats of black japan paint complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm outlet dia plain with grating including jointing with solvent cement including cutting out wall /concrete and finishing of surface to match existing surface all as specified and directed.

S&F, PVC (SWR) "P/S" trap 125/100 mm bore including cutting out wall /concrete and finishing of surface to match existing surface all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile.

M&L for joint free ceramic tiles coloured of size area of each tile exc.0.18 sqm but not exc . 0.38 sqm 9 to 10mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match all as specified and directed.

M&L, for joint free ceramic tiles coloured of size area of each tile exc.0.18 sqm but not exc 0.38 sqm 9 to 10mm thick in skirting etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the shade of tile complete all as specified and directed.

M&L for cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:4) for laying floor finishes like tiles etc complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work in CM (1:3) for receving vertical dado tiling complete all as specified and directed.

M&L for glazed ceramic tiles coloured, digital printed with highlighter & bath concept as per design and pattern approved by GE of size 450x250x6-7mm/ 450x300x 6-7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 to 25 mm thick polished cuddappa stone slabs set over and incl 20mm thick bedding in cement mortar 1:3 on cooking and preparation platform, fixed in repair complete.

Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation

M&L for screed bed 20mm thick in CM 1:3 complete all as specified and directed.

Taking down chowkhats or frame with shutter exc 1.5 sqm not exc 4.00 sqm

Taking down shutters of any description exc 1.00 sqm and 2.00 Sqm each.

Taking down and Re-fixing of shutter in same opening exe 1sqm n exe 2 sqm.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete as directed.

S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face pannels,commercial type on both sides complete all as specified and directed.

S&F 2nd Class H.W Glazed and skeleton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows ventilator stilles and rails provided as per SSR part -I Sector 8 clause 8.24 (b).

SF in repair for 18/19 mm thick Prelaminated particle board for cup board , interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified.

S&F butt hinges, extruded aluminium,with mild steel hinge pin, bright polished and fixed, type 75 mm size C21 complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel

S&F aluminium anodised 200 mm barrel tower bolts of extruded section

S&F aluminium anodised 150 mm barrel tower bolts of extruded section

S&F 150 mm long aluminium alloy handles, fabricated type, anodised.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.

S&F as in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.

S&F, in repair floor door stopper of aluminum body & tongues anodised with hard drawer steel spring fixed in floor of 150mm size complete all as specified and directed.

S&F small fittings 2nd class hard wood such as brackets of any type latch and hinge block shaped door and window stops and the like of 1st class hard wood including all necessary labour articles n. exc 200 cucm each

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.(Qty incl ventilator weight)

S&F framed work such as grills, gratings, etc. With ends of bars shouldered and/ or riveted, or forged into spikes; framed gaurd bars; barred iron doors; ladder; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 gde -E-165 complete all as specified and directed.

S&F Factory made steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

S&F in repair steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (Using 20mm graded crushed stone aggregate) as in hold fast , bed plates and all other similar works complete all as specified and directed.

S&F mild steel work in hold fasts, wall ties, pintle hinges and all other similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials,steel and iron works, new or old, of any description and girth, not otherwise described and treated with tar or coal tar black paint complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore.

Ditto all as per item no 89.00 herein before but 20 mm bore.

Refixing of 15mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete.

Ditto all as per item no 91.00 herein beforebut 20mm bore

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth.

S&F for 15 mm dia medium grade galvanised,with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Ditto all as per item no 94.00 herein before but 20 mm dia.

Disconnecting existing tanks of capacity exc. 250 & n exc. 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position.

S&F, in repair 500 Capacity in( litres) Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F, in repair 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe ( Wt not less than 15mm- 142 gms) all as specified and directed.

S&F, in repair nipple suitable for HDPE water tank min 45 gm of 20 mm bore of PTMT complete all as specified and directed.

M&L for complete removal of exiting treatment on wall surfaces and applying two coats of Oil bound distemper , over a one coat of putty as approved complete all as specified and directed. Note: thickness of putty shall be as per manufacturer instructions.

M&L for preparation of newly plastered surfaces and applying two coats OBD , over a coat of putty as approved complete all as specified and directed. Note: thickness of putty shall be as per manufacturer instructions.

M&L for preparation of old /new surface of wall surfaces and applying two coats of exterior water base emulsion paint over a coat of cement primer on walls all as specified and directed. approved make by GE.

M&L for preperation of old plastered surfaces of wall and applying one coat white wash complete all as specified and directed.

M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

M&L for prepartion of old ceiling surfaces and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.

M&L for applying one coats of synthetic enamel paint including preparation of old decorated wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.

M & L for rendering 10 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using water proofing compound @ 3% by weight of cement or as per manufracture's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid for seperately under relevant item)

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ of 1.2 Kg/Sqm including cleaning of surfaces complete all as directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Cutting holes into or through cement concrete slabs, chajjas etc reinforced n exc 100 sqcm superficial area work.

S&F UPVC Pipes 50mm bore with pressure rating 10 Kg/ sqm fixede to walls ceilings and floors work

M&L for Flush pointing in cm 1:3 to brick/roof tile on edge pavings all as specified and directed

M&L for Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads n exc 3Sqcm.

Taking up or down (from wall/ trenches/ floor) existing steel tubing and connections, including cleaning for refixing or removal to store of following sizes:-

GI pipe 25 mm dia

GI pipe 50 mm dia

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of pipe etc including getting out in Hard/dense soil complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type soil.

Removing of surplus soil not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed by Engineer-in-Charge

Supply and laying GI tubes 'medium grade ' with all galvanised fittings laid in trenches/on ground complete of dia 50 mm .

Supply and laying GI tubes 'medium grade ' with all galvanised fittings laid in trenches /on ground complete of dia 25 mm.

Supply and fix gun-metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed for pipe dia 50 mm .

Supply and fix gun-metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed for pipe dia 25 mm.

Cutting existing steel tubing for alteration and addition 25 to 32 mm GI tubing.

Supply and fix ball valves, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, flynut (accessories) complete including necessary elbow, socket & nipple complete of size 20 mm dia all as specified and directed

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting. ceiling fan etc. to be measured separately), removing materials to store for kepping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. all as specified and directed.

Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-

One light point controlled by one switch.

One ceiling Fan point controlled by one switch.

One exhaust Fan point controlled by one switch.

One bell point controlled by bell push switch.

One light point controlled by two 2 w a y s w i t c h e s, with cables 1.5 sq. mm size

One 3 pin socket outlet 5 Amps on independent board.

One 3 pin socket outlet on same board.

M&L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 4.0 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/ pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 4 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complee all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent.

Suppy and fixing Electronic bell/Ding dong buzzer,single phase AC complete all as specified.

S & F 18 watt LED tube light fitting suitable for 230 Volts, surface and wall mounted LED Make: Havells Model No LHEXACP7PN1W0180 or equivalent bajaj/wipro/philips/Syska

S & F 10 watt LED tube light fitting suitable for 230 Volts, surface and wall mounted LED Make: Havells cat part No LHEWEBP7N1W010 or equivalent in bajaj/wipro/philips/Syska

Supply and fix lamp holder , PVC/Poly carbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-charge.

Supply and Fix LED bulb 09 Watt complete all as specified and directed. Make: Wipro garnet N95001 or equivalent in bajaj/ philips

S&F switch piano type 5 A flush button single pole one way

S&F socket outlet 2 in 1, 3 pin 5 Amp

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal

S&F switch 2 way 5 A complete all as specified and directed

S&F ceiling rose, 3 Terminals/PVC/Polycarbonate, isolated body

Supply and fixing ceiling fan regulator electronic step type 240 Volts, ISI marked with valid CML No. and connecting up complete all as specified and directed.

Supply and fixing sheet metal enclosure for fixing MCBs TPN with 200 Amps rated neutral bus bar 415 Volts, 4 way, with double door fixed on flush to the wall including making the hole in th wall and fixing the DB including cement work and plastering complete all as directed

S&F sheet metal enclosure for MCB, DB, SPN 230 Volts 200 amps rated busbar 8 way double door complete including taking down all as specified and directed by Engr-in-charge.

S&F Isolater TPN 63 A, 415 V all as specified and directed.

S&F MCB SPN 40 Amps complete all as specified and dirested by Engr-in-charge.

S&F MCB single pole, 240 volts 6 to 40 Amps capacity.

Taking down old unserviceable MCB TPN ,SPN and SP of any capacity.

Taking down old ceiling fan and removing blade of any sweep and deposit to MES store yard.

S&F Ceiling fan 1200 mm sweep rated with down rod and all accessories required for proper hanging of fan complete all as specified and directed. Make: Crompton- model No WW PS -WOR or equivalent in havells/ bajaj

S&F Exhaust Fan 300 mm sweep with louver complete metal /plastic body complete all as specified and directed by Engr-in-Charge. Make: Crompton- model No Drift Air 12 or equivalent in havells/ bajaj

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 10 Cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Taking down old sub main wiring and making good disturbed surfaces of walls etc

M&L for sub main wiring with PVC insulate unsheathed FRLS 2 x 6 sqmm multi stranded copper conductor cable 1100 volts grade heavy duty drawn into concealed conduit with4 sqmm PVC FRLS insulated green copper cable for continuos earth PVC pipe not less than 25 mm dia with all accessories complete all as specified and directed.

Supply and replacement of electronic energy meter (LCD Display type in poly carbonate or sheet steel body ,class-I ,ISI marked, including anti tamper features,communication port ,50 HZ,240 Volts AC ,single Phase rating,5 A to 30 Amp complete all as specified and directed by Engr-in-charge. Make: HPL- SPPB1310000002OC00 or equivalent in L&T/ Anchor/ Havells. Note: old U/s electric meter deposite to E/M store yard.

Supply and fixing of Meter Box IP-65 with hinged flap with protection cover of size 400mmx300mmx190mm fixed in wall complete Make: Syntex GSJB-4030 or equivalent as approved by the GE.

S&F Gyser (Water Heater) of 25 lts capacity, BEE 5 Star with stainless steel container working with single phase 230 volt including connecting assessories complete all as directed Make : bajaj model-150692 or equivalent make in crompton, venus

Supply and lay cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross - sectional area of size 16 Sqmm 4 core.

M&L for sand cushioning to PVC/XLPE cables with river sand and punning to provide required cover to UG cables, complete all as specified and directed. Note:- For the purpose of payment only punned thickness will be measured

Supply laying bricks old size sub class B bricks common burnt bldg bricks laid in trenches for cable protection compete, all as specified & directed by Engr-in-charge.

S&F GI tubing light grade galvanised with all fittings & fixed complete wall/ pole for 50 mm bore complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in foundation/ surface repair etc complete all as specified and directed.

Taking down Old Unsv cable 10 Sqmm 2 core

Note for all items: All items shall be executed as specified and directed by Engr-in-charge.

RAJPATI CONSTRUCTION

M/s VIKAS TRADERS

Vee kay construction