Improvement works for kabarsthaan in Theni Allinagaram Municipality

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

For Footing

For Grade beam

Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

For Footing

For Coulmn

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

For Foundation and Basement

For Above basement

Brick work in CM 1:5 (one cement & five sand) using Fly Ash Bricks 230 x 110 x 70mm including finishing, curing, etc., complete complying with standard specification - 100CFT

For Foundation and Basement

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Providing Geophysical survey incuding all and conveyance,etc., complete

Drilling of Borewell 150 mm dia in Sedimentary formation and hard rock area including labour charges for inserting of casing pipes and supplying and packing of pebbles etc., complete

Supply and delivery of 180 mm dia PVC Plain casing pipe etc., complete.as per standard specification

Supply of following GI pipes and PVC Special etc.,complete

20LpmX125m head submercible pump set of ISI make

1.5HP pannel board

4 sqm 3 core flat type copper cable

40 mm dia HDPE Hose pipe(10Kg/sqm)

32 mm dia GI hex nipple

32mm dia GI Coupling

32mm dia GI bend

32 mm GI pipe

32 mm dia GM NRV

32 mm dia GI union

32 mm x 20 mm dia GI reducer Tee

20 mm dia GI coupling

20 mm dia CI waste NotTape

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

32 mm dia PVC pipe (10Kg/sqm)

32 mm dia PVC tee

32 mm fuse carrier

32 A main Switch - (SD 144)

40mm dia PVC pipe

40mm dia PVC Coupler

40mm dia PVC Elbow

Labour charges for fixing of submercible pump into the borewell including all cost and conveyance etc., complete

Supply and run of 2x4.00sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 69

Supply and run of 2 of 4.00sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64

Wiring with 2x1.5sq.mm. PVC insulated unsheathed FRL SSC copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5AFT switch in flush with wall with 3mm thick hylum sheet cover form making good of the concealed portion with suitable colour for PVC concealed light point/fan point (for electronic regulator) SD 25

Supply and fixing of 6 Metre Length Single Bracket Pole with Base Plate (250x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length

Supply and laying of 2 core 4sq.mm PVC copper UG cable

Supply and fixing of 30W LED Street Light Fitting with LED

Provision for GST of 18%

Please Enable Macros to View BoQ information