Providing and Fixing open Gym equipment in Najafgarh Area Assembly Constituecny,-35, underJurisdiction of Sub Division No. I, CD-13

Amount

Providing and fixing of AERO RIDER HD HORSE RIDER STATION make ARIHANT/KOMPAN/ LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. HD HORSE RIDER station size 1417x668x1425mm fabricated with main post of 114mm and 4.00mm thick made of hot roller tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury. Seat and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of CIRCULAR PULL UP STATION make ARIHANT/KOMPAN/LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. HD CIRCULAR PULL UP STATION of size 2500x760x1500mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel or equivalent of 80-120mm micron thick. The rails of dia 42mm and length of 2500mm and welded on the post with a 42mm dia support rods. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paints are applied at all welding points prior to finishing. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete us set, fix the equivalent on to it and cover nuts and bolts with the base plate.

Providing and fixing of OVATE STEPPER/HD ELLIPTICAL CROSS TRAINERS make ARIHANT/KOMPAN/LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. HD ELLIPTICAL CROSS TRAINER of size 1148x585x1486mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of SHOULDER TWIRL/BIG SHOULDER WHEEL make ARIHANT/KOMPAN/LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. BIG SHOULDER WHEEL SEATED CHEST PRESS of size 857x850x1815mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of FOREARM TWIRL/TAI CHI SPINNERS make ARIHANT/KOMPAN/LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. FOREARM TWIRL/TAI CHI SPINNERS TAI CHI SPINNERS of size 1150x1150x1650mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel or equivalent of 80-120mm micron thick. The circular spinners made from 32mm dia hot dipped galvanized steel rods and welded on to the post using a 6mm dia hot dipped galvanized steel supports. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury. Bearing used shall be made maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. on ground with concrete of minimum strength M-25 and J shaped The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of LEG EXTENSION/LEG STRETCH make ARIHANT/KOMPAN/LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. LEG STRETCH of size 932x811x1163mm fabricated with main post of 114mm and 4.00mm thick and rails made from 32mm dia pipes and thickness of 2.4mm pipes made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Base plate plastic of 8mm, colorful and UV resistant and environmental friendly. All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover..

Providing and fixing of HIP TWISTER/HD WAIST TWISTER make (HUGO)/GRAND SLAM as approved by Engineer-in-charge. HD waist twister of size 1463x1310x1258mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Rotating and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of CHEST PRESS/SEATED CHEST PRESS make ARIHANT/KOMPAN/LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. SEATED CHEST PRESS of size 1957x733x2058mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Seat and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Handgrip to be made from high quality rubber. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover.

Providing and fixing DOUBLE SHOULDER EXCISER/PULL DOWN CHALLENGER make ARIHANT/KOMPAN/ LANDSCAPE/ KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. Pull Down Challenger of size 2572x805x2187mm fabricated with main post of 114mm and 4.00mm thick made of hot roller tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Seat and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLDPE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover.

Providing and fixing of ABS BOARD/HD SIT UP STATION make ARIHANT/KOMPAN/LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. HD Sit up Station of size 1400x1366x650mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-100 micron thick. All joints of pipe are4 robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Sit up boards and Base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and UV resistant and environmental friendly. All open ends of pipe to be closed by LLPDE caps for user friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete us set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Providing and fixing of AERIAL STROLLER/HD HEALTH WALKER make ARIHANT/KOMPAN/LANDSCAPE STRUCTURES/KOOCHIE GRAND SLAM FITNESS. HD Health Walker of size 1070x615x1509mm fabricated with main post of 114mm and 4.00mm thick pipes made of hot roller tubular steel and hot dipped galvanized and powder welded coated using Akzo Nobel or equivalent of 80-120mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with in welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welded points prior to finishing. All complete as per technical specifications of manufacturer. The installation requires the poles to be fitted using Anchor fasteners on a concrete foundation of strength M-25, cement concrete blocks of required size, as per direction given by engineer-in-charge, finished below ground level

Providing and fixing of DOUBLE BALANCING BEAM/HD BALANCE BEAM H make ARIHANT/KOMPAN/LANDSCAPE/KOOCHIE (HUGO)/GRAND SLAM as approved by Engineer-in-charge. HD DOUBLE BALANCE BEAM of size 3695x1177x357mm fabricated with main post of 114mm and 4.00mm thick made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nodel or equivalent of 80-120mm micron thick. The balance beam composed of 3 beams of length 1175mm and dia 114mm each which is installed at an angle to provide a challenge in balancing for users thereby improving the mobility and strengthening the calf muscles. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover.

Providing and fixing EPDM Rubber Flooring 36mm thick with interlocking arrangement and adhesive all complete and size as approved by the Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Vikas Kaushik

virender kumar