INTERIOR, FURNISHING, RENOVATION, ELECTRICAL, CIVIL AND OTHER ALLIED WORKS FOR I. C. OFFICE AT 4th FLOOR VINDHYACAL BHAWAN BHOPAL (M.P.)

Amount

Lock - Providing and fixing bright finished mortice latch and lock ISI marked with six lever and a pair of anodised(anodic coating not less than grade AC 10 as per IS:1868 aluminuium lever handles with necessary screws etc complete. Best make of approved quality.

Providing and fixing Satin stainless steel finish 400x16 mm sliding door bolts with nuts and screws etc. complete.

Providing and fixing Satin stainless steel finish 600 mm and 32mm dia Handle H Type with nuts and screws etc. complete.

Providing and fixing Dorma TS-68 door closure with standard arm EN2/3/4, necessary accessories and screws etc. complete.

Providing and Applying ultra tech texture paint required placed. compete as per direction of engineer-in-charge.

Providing & fixing EURO pratik products of DECORIS series/CASA Series/3D wall art/ Designer wave board on 8mm thick ply (Century /Archidply/ Duro) on framework 50mmx50mm thick sal wood sections/second grade TW, placed at 600mm c/c in both the directions as per detail drawings. As directed by engineer in charge and architect.

Providing and fixing painting work made out of canvass by acrylic /oil paint colours as per design with framing work etc. complete in all respect as per direction given by Engineer in charge.

Providing and fixing steel dustbin with cover and rubber base for water protection perforated design as per direction of Engineer in charge.

Providing & fixing of plane washable wall paper high resolution including all fittings with wastage.(Spin Décor / marshell / Green)

Providing and fixing of zebra wooden chick blinds /roller blinds/ vertical blind of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/WINDOW TECH ) (Vista / NBT /MAC/ WINDOW TECH )

Providing And Placing of EXECUTIVE MAIN TABLE + SIDE TABLE WITH PEDESTAL : The Main Table should be of Size - 1800 x 900 x 750 with ERU With Pedestal of Size - 1200 x 500 x 750. The primary work surface should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Softclosing access flap with in-BACK UNITild power box are provided on work surface for wire management Secondary work surface ( ERU ) of size - 1200 x 600 x 750 should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel should be made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening Pedestals are provided with lock for security. Furniture Make- Haworth/ Herman Miller / Godrej/ Knoll/HOF (Greenguard/BIFMA Certified Co.)Design as approved by Engineer-In-charge.

Providing and fixing of T.V. unit for M.D.cabin made out of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with two drawers as per drawing given. All exterior surfaces to be finished in 1.0mm laminates/ corian as required specified by Architect and inner surfaces finished in 1.0mm laminate of approved shade with necessary hardware such as handles wire manager, etc as per design all exposed edged to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. the cost is inclusive of all materials and labour etc. complete in all respect as per drawing and direction given by Engineer in charge.

Centre Table 1000x600x400 - Providing and placing center table as per drawing made of 18MM BWP ply finished with 1.0mm laminate of approved shade. The top covered with 12mm. thick toughened glass with polished and beveled edges fitted with 3" stainless steel studs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Three seater Sofa - Providing and fixing in position fully upholstered sofa made with 18mm BWP ply and B grade teak wood frame. flat spring below foam at seat, stitching, slopes color, hemming with seat of 80mm thick softy foam and reckon filler, 100mm 40 density foam on back and arm with 40mm thick high density foam, seat and back covered with best quality markeen, and finished in fabric (of not less than Rs 1000 per mtr) of approved colour, texture and quality including teak wood molding / frame sofa to be made in the module of three seater with arms on both face, seat size 500x550mm over all depth 700mm. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Two seater Sofa - Providing and fixing in position fully upholstered sofa made with 18mm BWP ply and B grade teak wood frame. flat spring below foam at seat, stitching, slopes color, hemming with seat of 80mm thick softy foam and reckon filler, 100mm 40 density foam on back and arm with 40mm thick high density foam, seat and back covered with best quality markeen, and finished in fabric (of not less than Rs 1000 per mtr) of approved colour, texture and quality including teak wood molding / frame sofa to be made in the module of two seater with arms on both face, seat size 500x550mm over all depth 700mm. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Corner Table 600x600x400 - Providing and placing corner table as per drawing made of 18MM BWP ply finished with 1.0mm laminate of approved shade. The top covered with 12mm. thick toughened glass with polished and beveled edges fitted with 3" stainless steel studs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Table counter, 600 mm wide - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with one drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in 1.0mm laminates / corian as required specified by Architect and inner surfaces finished in 1.0 mm laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality Teak Wood beading which is to be melamine polished / pu coating. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Table 1800 x 900 x 750 - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware, having a storage unit with three drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished with post form laminate as required specified by Architect and inner surfaces finished in laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with PVC beading 2mm. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Side Table 1650 x 600 x 750 - Providing and fixing table of specified size to be made up of 18MM BWP ply as per drawing using approved make hardware. All exterior surfaces to be finished with post form laminate as required specified by Architect and inner surfaces finished in laminate of approved shade with necessary hardware such as handles,hinges etc as per design all exposed edges to be finished with PVC beading 2mm. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing of Conference Hall /Marketing room Table 600mm. wide made of 18MM BWP ply finished with post form laminate inner and outer side. The table top front will be 24mm. thick PVC beading. 2mm thick Provision for foot rest, wire manager shall be made. all exposed edges to be finished with PVC beading 2mm. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Providing and fixing of storage units (laminate finish) (1500 mm wide) - Providing and fixing at site file / storage cabinet made up of 18MM BWP ply with Post form laminate as per drawing. All shelves and partitions to be made up of 18MM BWP ply and Pallah to be made up of 12mm. thick BWP ply fixed with hinges of approved make. All exposed edges to be finished with PVC beading 2mm and all inside surfaces to be finished with laminate. The cost is inclusive of all materials accessories, SS handles, lock, labour, etc. complete in all respect as per drawing and direction given by Engineer in charge.

Providing And Placing of EXECUTIVE HIGH BACK CHAIR LEATHERITE. : The cushioned seat is to be made of injection molded plastic outer & inner. Plastic inner shall be upholstered with leatherette and moulded high resilience ( H R) Polyurethane foam of density 45+/-2kg/m compression. Seat Size should be 47.0 cm(W) x 48.0cm (D).The cushioned back is to be made of PU Foam with insitu molded MS E.R.WRound Tube of size 1.9+/-0.03cm x 0.16+/-0.0128cm. duely upholstered with leatherette. The High Back should be of size 47.7 cm(W) x 76.4 cm.(D). The armrest top should be moulded from polyurethane (PU) and mounted on to a drop lift adjusted type tubular armrest support made of 3.81+/-0.03cm x 0.2+/-0.01cm thk M.S E.R.W tube having chrome plated finish. The armrest height shall be adjustable up to 6.5+/0.5cm in 5 steps. Mechanism should be Active Bio - Synchro Mechanism. The adjustable tilting mechanism is to be designed with the following features:it should be 360D revolving type.Front pivot for tilt with feet resting on ground and continuous lumbar support ensuring morecomfort. Tilt Tension adjustment can be oprated in seating position. 5-position tilit limiter give option of variable tilt angle to the chair.Seat/back tilting ratio is of 1 : 2. The mechanism housing is to eb made of HPDC Aluminium black powder coated.. Seat adjustment is integrated in the seat through a sliding mechanism , Seat depth adjustment range is of 6.0+/- 0.5cm..Adjustable Back support back frame is to be connected Up/Dn mechanism housed in plastic T spine . It can be adjusted in the range of 7.42+/-0.5 cm for the comfortable back support to suit individual need. Pneumatic Ht adjustment has an adjustment stroke of 10.0+/-0.3 cm. The Pedestal ahall be of high pressure die cast polished Aluminium and fited with 5 nos. twin wheel castors. The pedestal is of 65.0 +/- 0.5cm pitch center dia (75.0+/-1.0cm with castors. The 5 bos. wheel castors shall be injestion mouldedin plastic having 6.0+0.1cm wheel diameter and assembled to pedestal. Furniture Make- Haworth/Herman Miller/Godrej/Knoll/HOF (Greenguard/BIFMA Level 2 Certified Product.) Design as approved by Engineer-In-charge.

Providing And Placing of Versa Neo VISITOR CHAIR FIXED : The chair should be of size 60.9 (W) x 64.3 (D) 99.5cm cushioned seat is to be made of injection molded plastic outer & inner. Plastic inner shall be upholstered with leatherette and moulded high resilience ( H R) Polyurethane foam of density 45+/-2kg/m compression. Seat Size should be 47.0 cm(W) x 48.0cm (D).The cushioned back is to be made of PU Foam with insitu molded MS E.R.WRound Tube of size 1.9+/-0.03cm x 0.16+/-0.0128cm. duely upholstered with leatherette. Mechanism - the tubular frame shall be cantilever type & made up of 02.54+/-0.03cm x 0.2+/-0.016cm thk S.S 202 tube. The back connect to frame through powder coated (DFT 40 -60 microns) high pressure die cast connector piece. Furniture Make- Haworth/Herman Miller/Godrej/Knoll/HOF (Greenguard GOLD/GRIHA/BIFMA Level 2 Certified) Design as approved by Engineer-In-charge.

Providing and Fixing chair The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with fabric and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro single position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/ BIFMA X7.1standards (HAWORTH/ HERMANMILLER/ GODREJ/ WIPRO/ FEATHERLITE/HOF. MAKE )

Providing and Fixing Chair The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm, (H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest is fixed . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/ BIFMA x5.1 standards (HAWORTH/ HERMANMILLER/ GODREJ/ WIPRO/ FEATHERLITE/ HOF. MAKE )

Table 1800 x 900 x 750 - Providing and fixing table of specified size to be made up of 18 MM BWP ply as per drawing using approved make hardware, having a storage unit with three drawers as per given drawing. Provision has to be made for keyboard tray, CPU stand. All exterior surfaces to be finished in Post form laminates as required specified by Architect and inner surfaces finished in laminate of approved shade with necessary hardware such as handles wire manager, telescopic drawer slides, etc as per design all exposed edges to be finished with first quality PVC beading 2mm. The cost is inclusive of all materials and labour etc complete in all respect as per drawing and direction given by Engineer in charge.

Supplying, fixing & testing of 4K Ultra HD 55" Smart TV (3840x2160), 3 HDMI ports to connect set top box, Blu Ray players, etc. ound : 20 Watts Output Memory Storage Capacity 4 GB, Ram Memory Installed Size 1.5 GB. Make: SONY/LG/SAMSUNG

Supplying & Laying of 4k HDMI Cable.

Providing & Fixing of 24-Port Data Switch of [Managed Layer-2 with 2-Giga Ports (10/100/1000) ] Make: D-link/Cisco/Netgear (NOTE:- The bidder shall quote his own rates for Item No. 1 to 30 of Item rate Part.)

Bidder Name

Amount

ABBOTTSONS IMPEX PVT LTD(GSTN-23AAECA7527R1Z9)

BONTON TECHNOMAKE PRIVATE LIMITED(GSTN-23AABCB4237A1ZH)

BONTON TECHNOMAKE PRIVATE LIMITED

BONTON TECHNOMAKE PRIVATE LIMITED