REPAIRS TO TOILETS, PLASTERING, JOINERY, FLOORS, FALSE CEILING, SANITARY FITTINGS FOR DOM MESS, ASC HOUSE, DCCI HOUSE, ASC RECORDS SOUTH, JOI AND BUCHERY UNDER AGE B/R-II OF GE (CENTRAL) BANGALORE

S & F in repairs chromium plated health faucet(ABS) with 1 metre long flexible pipe suitable for 15mm bore pipe complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long complete including making good damaged/disturbed surfaces complete all as specified and directed.

S&F in repair Vitreous China Wash hand basin, white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, pillar taps, brass, with capston heads, fancy type, chromium plated, 32 mm waste coupling brass chromium plated suitable for wash hand basins & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 450 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge.

S & F in repair 10 litre capacity, PVC valve less syphonic action type, 32mm dia flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including PVC connection pipe of 15mm dia, 600mm long, brackets complete all as specified and directed.

S&F in repairs 15mm Bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F in repair 15 mm bore stop valves/angle valve cast copper alloy chromium plated fancy type with long shank and cup, screwed down to iron pipe complete all as specified and directed

S&F in Repair Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified & directed by Engineer-in-charge.

S & F in repairs brass, chromium plated, 15mm bore wall mixer for mixing hot and cold water, screwed down with provision of over head shower and cock for iron pipe and fixed complete all as specified and directed.

S & F in repairs brass chromium plated shower rose and arm with or without swivel joints, 125mm size including fixing to iron pipe complete all as specified and directed.

S & F in repair 2 way bib cock double handle with flange, cast copper alloy chromium plated, screwed down, suitable for 15mm bore iron pipe complete all as specified and directed.

S & F in repairs, PVC, water closet seat and cover, white/black closed pattern with recessed bottom, mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed.

S&F in repair steel chromium plated gratings, circular type, 125mm dia with or without waste hole fixed to existing traps with white cement complete all as directed.

S & F in repairs PVC connection pipe with PTMT nuts, 600mm long complete all as specified and directed.

S&F in repair 32/40 mm dia low density polyethylene (LDPE)plain/corrugated flexible pipes of pressure rating 6 Kgf/Sq.cm with connecting bracket fixed to waste coupling for basin/sinks complete all as specified and directed.

Taking down bib tap, pillar cock, stop/angle cock, & shower rose etc for carrying out repair/ refixing the same in old position after cleaning, replacing washer, brass spindle and adjusting screws including removing air blocks etc complete all as specified and directed.

All as per item No 20 above/ here-in-before but for hot & cold mixing valves/taps/wall mixer complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia 'D' type, 600mm long between flanges complete all as specified and directed.

S & F in repair 5.5mm thick looking mirror cut to required size and fixing to dressing table / counter top wash hand basins/ cupboards using timber fillets including taking off unserviceable mirror complete all as specified and directed.

S&F in repair 300 mm size Corner Shelf with 5.5 m or more thick glass with chromium plated bracket guard and railing, fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed.

S&F in repairs 15mm bore single lever basin mixer without popup waste system chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified & as directed

S&F in repairs overhead rain Shower square 150 x 150 mm with shower arm with brass chromium plated shower rose with or without swivel joints complete all as specified and directed.

S & F in repair 110 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 75 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F in repair 75 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F in repair 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repair PVC (SWR) branch piece single,(single Y) 110 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F in repair PVC (SWR) branch piece single,(single Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F in repair PVC (SWR) branch piece (double Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F in repair PVC (SWR) branch piece (double Y) 110 mm dia equal or unequal with oval access door complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing the rubbish off the premises outside MD land complete all as specified and directed.

M&L for Vitrified tiles of 9-10 mm thick (square/ rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Vitrified tiles of 9-10 mm thick (square/ rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick rendering in cement mortar 1:4 as backing coat to recieve dado etc complete all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surface 600 x 1200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM 1:4 to recieve wall tiles etc complete all as specified and as directed.

Demolition of stone slabs of any description or thickness in floors laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and as directed.

M&L for makrana white Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and any other platforms in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade 15 mm thick screed bed in CM 1:6 and Rounding to edges complete all as specified and as directed.

M&L for 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 and Rounding to edges complete complete all as specified and as directed.

Demolition of Brickwork or PCC solid block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Precast cement concrete type C1, 1:3:6 (20mm graded aggregate) solid building blocks 10cm thick setting in CM 1:4 complete all as specified and as directed.

M&L for precast cement concrete block Type C1, 1:3:6 (20 mm graded aggregate) masonry with solid block, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Taking down Cement Plaster of any description on Brick Walls, Stone Walls Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land complete all as specified and directed.

M&L Rendering 15 mm thick on brick masonry or concrete surfaces of walls in CM 1:6, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on brick masonary surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 with 3% of WPC, Surfaces even & smooth without using extra cement on external surfaces of wall incl chajja and including necessary scaffolding upto 5 floors complete all as specified and as directed. Note : WPC shall be measured and paid separately under relevant item.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre, including cleaning of rusted steel particles in reinforcement complete all as specified and directed.

M&L for rendering 10mm thick on fair face of brick work or concrete surfaces of ceiling in CM (1:3) finished even & smooth without using extra cement including necessary scaffolding complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer including on newly plastered surfaces of wall including a coat of wall care putty 1.5mm (average) thick & necessary prepartation complete all as specified and as directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint (weather proof paint) of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new plastered surfaces of wall including necessary scaffolding complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of wall including a coat of wall care putty 1.5mm (average) thick & necessary prepartation complete all as specified and as directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down shutters only of any description n. exc 2 Sqm each complete all as specified and directed.

Taking down shutters exc 1 sqm but not exceeding 2.0 Sqm easying, adjusting and refixing in same opening after carrying out minor repairs complete all as specified and directed

S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F stailess steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples with wodden beading on wooden shutter or with screws to steel / aluminium shutter complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification given in SSR Part-1 clause 8B.2.1 & drawing as on page 146 all as specifed and as directed by Engineer-in-Charge.

S&F solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing & all as specifed and as directed by Engineer-in-Charge.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge

S&F Butt hinges 75mm mild steel , medium weight.cold rolled mild steel complete all as specified and directed.

S&F 100mm long Aluminium, anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodized handles of extruded section complete all as specified and directed

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S&F in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed

S&F in repairs 150mm aluminium anodised handles of extruded section complete all as specified and directed

S&F in repairs 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed

S & F in repair aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S&F in repair 300mm, ordinary rat tail rod pattern springs mild steel including roller and roller plate complete all as specified and directed

S&F in Repair 25mm dia stainless steel Curtain Rod of approved quality all as specified and directed.

S&F in repair decorative type curtain rod brackets with side domes suitable for 25mm dia curtain rods complete all as specified and directed.

S&F in repairs for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beading complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4 mm thick, figured glass, pin head type and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane including fixing in louvers complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75mm dia plain with steel grating including jointing with solvent cement etc complete all as specified and directed

M&L for 18 mm thick PVC ply both sides plain coloured as in kitchen cupboard / cupboards including solvent cement , stainless steel hinges, handles, SS screws etc as per manufacturer's instructions including fabrication of frame for kitchen cabinets and fixing to wall any type or frame complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel bright finish or electrogalvanised complete all as specified and directed.

S&F soft closing hinges/ auto closing hinges chromium plated including fixing accessories complete all as specified and directed.

S&F Cabinet Handles 90-100 mm Sleek Pull Handle designer type for Drawers, Wardrobes, Sliding Doors, and Cabinets in Kitchen, Bedroom, and Office as per the sample complete all as specified and as directed.

M&L Preparation of New Wood surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as specified and as directed.

M&L for Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories with area not exceeding 2.00 sqm each complete all as specified and directed.

S&F in repair Powder coated aluminium sliding window (three way) frame & shutter with glazed shutter and without wiremesh shutter /skeleton section with the following details :- (i) Aluminium frame section 116x36.50x1.80mm. (ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick. (iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified. (iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making good distributed surfaces complete in originally shape. (v) 4mm thick glass ordinary quality and fixed with rubber gasket for with glazed shutter etc. (vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for without glazed shutter etc. (vii) Aluminium disc /bow handle and locking system complete (vii) Arrangement for exhaust fan shall be provided in kitchen window

S&F Powder coated aluminium side hung window with frame & shutter with glazed shutter and wiremesh shall be fixed in separate aluminium frame section with the following details :- (i) Aluminium frame section 68.3x38.3x1.60mm, Aluminium mullion 65x42x1.5mm (ii) Aluminium main shutter glazed/skeleton section 95x42x1.6mm with matching shutter70x42x1.50mm thick. (iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified. (iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making good distributed surfaces complete in originally shape. (v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc. (vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm fixed in aluminium frame outer section 25x50x1.2mm and mesh shutter section of size 30x60x1.2mm with rubber gasket/EPDM gasket complete (vii) Aluminium handle, hinges and locking system complete (viii) Arrangement for exhaust fan shall be provided in kitchen window

S&F in repair Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following details :- (i) Aluminium frame section 45x25x1.80mm. (ii) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making good distributed surfaces complete in originally shape. (iii) 4mm thick frosted glass orinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for with glazed shutter etc.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulations boards / slabs / blankets any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with size of grid 605 mm x 605 mm complete all as specified and directed.

S&F PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed.

S&F 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surace over 2nd class soft wood fillets or metal frame work and reinforced with GI wire mesh incl any required sunk or raised moulding complete all as specified and directed. Note : Fillets, metal frame and GI wire mesh will be measured and paid separately.

S & F in repairs rotational moulded polyethylene water storage tanks tripple layer of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with tank adaptor, Gun-metal, globe or gate valves of 40 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed including taking down existing tank complete all as spcified and directed

S & F in repairs rotational moulded polyethylene water storage tanks tripple layer of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with tank adaptor, Gun-metal, globe or gate valves of 40 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed including taking down existing tank all as spcified and directed

M & L for removing shrubs/ vegetation upto roof at any height up to five storey from the wall /beam/roof/chajja etc. and filling the holes with cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) of minimum size 15cm x15cm x 15cm or as required and making good the surface as directed by Engr-in-charge.

S&F in repairs 20 mm ball valves, high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 25 mm ball valves, high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for Preparation of new or previously treated surfaces to be applied must be free from dust, loose materials, oil or any other materials as per the following steps :- (i) The cracked surface to be widen up to 5mm wide which will be filled with Dr fixit Pidicrete URP. (ii) Then apply Dr Fixit Torchshield primer by mixing 50% of water and primer in equal proportion. (iii) After the surface completely dried up apply 2 coats of Dr Fixit Roof seal over roof/vertical surfaces @ 0.75ltrs/sqm for each coat at an interval of 12 hrs between the coats and allow drying completely. Note : Ponding test will be carried out after fully dried out at leat 72hrs, test will be carried out for 48 hrs by filling water up to 50mm level to observe for any leakages and then remove the water and allow the coating to dry completely for about 24 hrs before proceeding further.

Demolition of unreinforced cement concrete in floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4, type B-0 using 12.5 mm graded aggregate as in sub base or levelling course to receive floor finishes complete all as specified and directed.

Please Enable Macros to View BoQ information