Day to day maint to address emergency complaints of leakage/seepage, cleaning of service tanks and connected works at Varanasi Cantt.

Amount

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.

M&L for Brick work with sub class B brick old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for half Brick work with sub class B brick old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in flooring as cement concrete (un-reinforced) as in sunken floors, paving and any position and any thickness complete all as specified and directed..

M&L for 40mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in floor complete all as specified and directed .

M&L for Rendering 15 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed.

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed .

Supply 20mm Stop valve of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixe complete all as specified and directed.

Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old RCC/PVC tank complete all as specified and directed.

Dismantling existing roof treatment including old membrane ,brick tiles any size laid bedded and pointed in any mortor and mud phuska any type of tiles complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding, coping , kerb etc finishing the surface fair & even. complete all as specified and directed.

Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Preparation of PCC/RCC roof surfaces and then providing 10 mm thick SBR polymer modified plaster in cement mortar l:4 cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm (each coat), complete all as specified and directed. Make: NitoProof 725 of Fosroc or equivalent product of Pidilite Dr Fixit Super Latex / Asian Paints / M/s MC Bauchemie / CIPY/ SIKA / Thermax / STP. Note: a) The work shall be carried out complete as per manufacture’s specifications and application methodology. Execution shall be done with authorized trained/skilled applicator of manufacturer as per the technical guidelines laid by manufacturer. Company back guarantee of 10 years shall be given by contractor after completion of Water Proofing work before payment. b) Ponding test for 72 Hours shall be carried out by contractor to check any instances of Leakage/Seepage, The results of successfull Ponding Test shall be certified by Engineer-in-charge and User Rep before payment

M&L for Cement concrete tiles 20 cm x 20 cm x 20 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished built with grey cement and no pigment over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Removal of vegetation using approved herbicide in Chajja parapet,plinth between Roof and parapet wall etc upto height of 8m and filling the gap with grout of Cement mortar ratio 1:3 complete all as specified and directed.

Material and labour cleaning of water storage tank capacity exceeding 250 litres but not exceeding 500 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner including marking of date of cleaning with synthetic enamel paint in a manner complete all as specified and directed. Date of Cleaning shall be Written with Stencil. Contractor shall maintain a register of tank cleaning which shall be certified by AGE and User Rep payment. Note: If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account

Material and labour cleaning of water storage tank capacity exceeding 500 litres but not exceeding 1000 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner including marking of date of cleaning with synthetic enamel paint in a manner complete all as specified and directed. Date of Cleaning shall be Written with Stencil. Contractor shall maintain a register of tank cleaning which shall be certified by AGE and User Rep payment. Note: If during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.

S& F of Ladders/ Stairs including stringers, treades, landing, balusters, hand rails etc. Including cleats, brackets, etc. Fe- 290 (Gde E- 165) Including anchoring/fixing by fastener on roof slab and PCC on ground complete all as specified and directed. Note: PCC item will be measured and paid separately.

Attending complaints like leakge of taps, angle valve stop cocks or in pipes, fitting and removing of plumbing fittings such as Bib taps , pilllar taps, GI tubing , stop cocks, angle vales, float valves water tanks, gratinsgs, traps , WCs flushing cistern, waste pipes, WHBs, EWCs and similar work for continuity of essential internal water supply/sanitary services by employing an experienced team of plumbers and helpers to restore the exiting/services to the satisfaction of Engineer-in-Charge. Note :- (i) T&P including conveyance to reach door to door for attending the jobs will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor 's supervisor (auth rep). (iii) The area/Location of of Job will be all MD and OTM, officer accn in AOR of AGE MES varanasi

Supply only 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Dismantling / taking down 15 mm dia unserviceable bib cock/ stop cock/Pillar cock/Angle cock etc of any pattern or of any type and removing from site complete all as specified and directed.

Dismantling / taking down 15 mm dia bib cock / stop cock/Pillar Cock/Angle cock etc of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers and major repair such as jumper brass, spandle/ caps etc or refixing old serviceable bib cocks/ stop cocks/ pillar cock/angle cock any pattern complete all as specified and directed. Note - Any major parts such as jumpers brass/ spindles/ caps any type etc to be measured as supply only in conjuction with this item and paid for accordingly)

Supply only in existing ones spindle of brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.

Supply only water tank covers of PVC suitable for 300/500/1000 Ltr tanks complete all as specified & directed.

Supply only CP grating 100 mm to 125 mm dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

Supply only 32 mm Waste fittings/coupling, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed.

Supply 32 mm Waste fittings /coupling brass, chromium plated for wash hand basin, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed.

Supply only 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union complete all as specified and directed.

Supply only 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

Supply only 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

Supply only 15 mm dia stop valves cast copper alloy chromium plated long shank (concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

Supply only Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed

Supply only PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Supply only brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

Supply only Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed.

Supply only PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe , complete all as specified and directed.

Supply only sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply only cantilever brackets for support of sink and Wash hand basin comlete all as specified and directed.

Supply only Stainless steel plate rack (utensil rack) of size (600mm x 750mm) and depth 300mm made with 0.63mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts fixed in repairs complete all as specified and directed.

Supply only Nipple of size 15/20mm suitable for HDPE water tank complete all as specified and directed.

Supply only socket, union, Tee, angle , band , reducer of size 15/20mm suitable for connections complete all as specified and directed.

Supply only Galvanised steel medium grade tubes of size 15mm and also making grooves through dye.

Supply only Galvanised steel medium grade tubes of size 20mm and also making grooves through dye.

Supply only 20mm but under india rubber washers for pillar taps etc.

Supply only Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

Supply only Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)

Supply only Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern ®

Supply only Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

Supply only Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

Supply only Vitreous China wash basin, white, flat back, size 550x400mm excluding ditto but including brackets

Supply only Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Cutting existing steel tubing 20 bore of pipes in mm for alterations or additions (Each cut measured ) complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F in repair 110mm PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed.

S&Fin repair 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed.

-ditto- all as per item No. 70 above but for 75mm.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

Supply only flushing cistern washer any type any size

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe.

S&F GI tube 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor all as specified and directed.

Supply only Instant Leak plugging Compund: Make: Rendroc Plug of Fosroc or equivalent in Sika/Pidlite/Thermax

Attending complaints related to carpentery work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, use of any other stores/fittings shall be paid seprately under Supply only items in building to continuity of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of Engineer-in-Charge. All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including conveyance to reach door to door for attending the jobs will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor 's supervisor (auth rep). (iii) The area/Location of of Job will be all MD and OTM, officer accn in AOR of AGE MES varanasi

Supply only putty for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed complete all as specified and directed. The cost of putty/ wooden beads is deemed to be included in the quoted rates.

Material & labour for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed complete all as specified and directed. The cost of putty/ wooden beads is deemed to be included in the quoted rates.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc.n exc.1 Sqm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply only aluminium anodised Hasp and staple, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply only Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply only 250mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply only 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

supply only Continuous (piano) hinges, Width of flaps (when open) in 30 mm mild steel, bright finish or electrogalvanised

Supply only 150 mm Aluminium handles, cast type, anodised.

S&F in repair 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

M&L in repair for 3 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed ,complete and all as specified and directed.

Supply only Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.40mm

Supply only Floor door stopper of aluminium alloy body and tongue, anodised, Overall length of cover plate140mm with hard drawn steel spring, fixed in floor

Supply only Door closer cast iron body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width complete all as specified and directed.

Supply only Brass Hat pegs, solid body, 125mm to 175 mm complete all as specified and directed.

Material and labour for repairing aluminium doors/window including refixing ,tightening and making good with using rubber/beads/locks and others fixtures/fittings floor machine , glass, handle, lock etc. if required and making serviceable all as specified and directed .

Supply only wooden beads for securing of door wire mess etc complete all as specified and directed.

Supply only Screws/Nails/ Nut bolt / steel cleap for wire mess fixing in window etc. any size any type complete all as specified and directed.

Attending complaints related to black smith work and obtaining completion from user for resecuring/easing/minor repair and welding work to make functional of steel doors, steel windows, steel rolling shutter and gates etc by greasing,oiling & cleaning and changing of required fittings, fixtures & compnents etc by employing experienced Black smith with a helper to restore the existing service to the satisfaction of Engineer-in-Charge by using store issued by the Dept..All as directed T&P for attending the job will be provided by the contractor. Note :- (i) T&P including convence to reach door to door for attending the jobs will be provided by the contractor. (ii) The complaint slip will be collected from complaint cell incharge/JE(Civ) by the contractor supervisor (auth rep). (iii) The area/Location of of Job will be all MD and OTM , officers, accn

Supply and fix in repair 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

Repairs to existing steel rolling shutters by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover / hood etc, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint complete all as specified directed.

Supply and fix in repair 300 mm stainless steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

M/S SWATI CONSTRUCTION (BID ID -3075116)

GAYDIN CONSTRUCTIONS (BID ID -3091884)

Usha Contractors and Engineers (BID ID -3091757)

M/S DEEKSHA CONSTRUCTION (BID ID -3097087)