Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.8 LAccepted-AOC HOUSE NO 93 WARD NO 8 NEAR ISKON TEMPLE UDHAMPUR J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹25.0 L+₹1.1 L (4.75%)Rejected-AOC | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹25.8 L+₹2.0 L (8.45%)Rejected-AOC | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹29.7 L+₹5.8 L (24.5%)Rejected-AOC C O AKBAR FURNITURE HOUSE MALHAR MORH GARHI UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹31.2 L+₹7.4 L (31.1%)Rejected-AOC NEW JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-AOC REJECTED |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER SOUTH UDHAMPUR
GE SOUTH UDHAMPUR C/O 56 APO GARHI
GE S U 22 2022 23 PETTY REPAIR AND PERIODICAL SERVICES OTHER MISC BR WORK AT HQNC CP COLONY CAMP HRDC A MESS AND TA GP TA COY NCIB AND AOR OF AGE BR II GE SOUTH UDHAMPUR
2022_MES_540476_1
GE/S(U)-22/2022-23
Open Tender
Civil Works - Canal
Works
330 days
GE SOUTH UDHAMPUR
As per NIT documents
9 documents required · 9 mandatory
₹500
GE SOUTH UDHAMPUR
₹60,000
1 Oct 2022
23 Jul 2022
22 Aug 2022
23 Jul 2022
20 Aug 2022
6 Aug 2022
23 Jul 2022 - 2 Aug 2022
Amount
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.
All as per Srl item No 01, but exc 1.50 Sqm but not exc 4.00 Sqm complete all as specified and as directed.
Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed.
Taking down shutters of any description exceeding 1 square metre each and n. exc 2 Sqm complete all as specified and as directed.
Factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc complete all as specified and as directed.
2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 part-I specification supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc complete all as specified and as directed.
Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and as directed. Note :- Contractors/Contractor representative/ Engineer will report to HQ NC complaint cell/ concern JE daily in Morning 0900 Hrs to collect complaint for routine/urgent works related to day to day maintenance till completion of contract. (b) All routine/urgent jobs received on docket slip shall be attended within 24 hrs. (c) The period for working to the such complaint shall be decided by GE/Engr-in-Charge. If delay is more than 24 Hrs & GE/ Engr-in-Charge is not satisfied with reason for delay in working then the penalty of Rs. 350/complaint/day shall be recovered from contractor.
Solid mouled PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing as shown in relevant SSR and complete all as specified and as directed.
Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site complete all as specified and as directed.
Anodised aluminium door shutters with frame powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including with suitable locking arrangement with lock (Make: Godrej) 4 lever, 5.5mm thick tinted glass, 5mm thick aluminium push plate, hydraulic door closer-01 No, pivot with standard floor spring and pivot on top frame, aluminium tower bolts 300 mm long-01 No, glazing clips, rubber packing for locking purpose with aluminium snap beading screws, handles 2 Nos in each door, hinges, etc. complete all as specified and as directed.
Powder coated (50 micron of approved colour) Aluminum anodised shutter window (glazed or wire gauge) fixed type with aliminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including all fittings such as rubber gasket aluminum glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including all accessories complete all as specified and as directed.
10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and connecting all premium acessories as required complete all as specified and as directed.
Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and as directed.
Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and as directed.
S&F aluminium handles cast type, anodised, 150mm size complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.
S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel/wooden/PVC door frame complete all as specified and as directed.
Mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel/wooden/PVC door frame complete all as specified and as directed.
Mild steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel/wooden/PVC door frame complete all as specified and as directed.
S&F in repair mild steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel/wooden/PVC door frame complete all as specified and as directed.
Rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-W (Gde E-250) quality 'A" as in repairs complete all as specified and as directed.
Galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.
S&F in repair galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed.
150 mm Brass barrel tower bolts,with cast or sheet and rolled or cast bolt complete all as specified and as directed.
Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts 300 mm complete all as specified and as directed.
150 mm length Brass handles, cast type, polished bright Extruded, fabricated type complete all as specified and as directed.
12 mm thick plywood grade A (Termite treated / water proof), type BB fixed with screws to timber /iron frame work . (Make:Green Ply/Kit ply) complete all as specified and as directed.
0.9 mm thick decorative choice of lamination type -1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and as directed.
Continous (piano) hinges, 30mm wide mild steel bright hinges 30mm width of flap, mild steel bright finished or electro galvanised complete all as specified and as directed.
Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.
4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.
Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and as directed. Note :- Contractors/Contractor representative/ Engineer will report to HQ NC complaint cell/ concerned JE daily in Morning 0900 Hrs to collect complaint for routine/urgent works related to day to day maintenance till completion of contract. (b) All routine/urgent jobs received on docket slip shall be attended within 24 hrs. (c) The period for working to the such complaints shall be decided by GE/Engr-in-Charge. If delay is more than 24 Hrs & GE/ Engr-in-Charge is not satisfied with reason for delay in working then the penalty of Rs. 350/complaint/day shall be recovered from contractor.
Vitreous China wash basin, white, flat back, size 550mm x 400mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair complete all as specified and as directed.
10 ltr capacity PVC low level flushing cistern symphonic action type white with inlet valve float and handle including brackets, fixed in repairs complete all as specified and as directed.
S&F in repairs of Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm including taking down steel tubing with connections complete all as specified and as directed.
Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm including taking down steel tubing with connections complete all as specified and as directed.
S & F in repair Vitreous china squatting pan 'Orissa' pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe complete all as specified and as directed.
S&F in repair ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as required at site complete all as specified and as directed.
S&F in repair ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as required at site complete all as specified and as directed.
S&F fixing in repair ball valves of size 25 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as required at site complete all as specified and as directed.
S&F in repair 15mm bore dia of pipe in Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repair angle valve of brass fancy type, chromimum plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, complete all as specified and as directed.
PVC connection 15 mm size with PTMT nuts 600mm long, complete all as specified and as directed.
S&F in repair counter type Vitreous china ware wash hand basin (WHB) white size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and as directed.
S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.
S&F in repair Water closet wall mounted pattern coloured of size 535mm x 380mm x 400 mm as approved and complete all as specified and as directed. Make : CERA Cat Part No (S1041109 P trap), Seat cover B1510108 Clair seat cover
S&F in repair WHB coloured 550 mm x 480 mm with Pedestal as approved and complete all as specified and as directed. Make :CERA Cat Part No (S2040115 & S2090111).
15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and as directed. Make: Jaquar, Cat Part No CON 167KNB or equivalent in CERA.
15 mm bore wall mixer fixed in repair complete all as specified and as directed. Make: Jaquar or equivalent in CERA.
125 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and as directed.
15 mm bore long body Bib tap in repair complete all as specified and as directed. Make : Jaquar Cat Part No CON-037KN or equivalent in CERA.
15 mm bore Bib tap in repair complete all as specified and as directed. Make : Jaquar Cat Part No CON 107KN or equvalent in CERA.
15 mm bore angular stop cock with wall flange in repair complete all as specified and as directed. Make: Jaquar Cat Part No CON-059KN or equivalent in CERA.
Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and as directed. Make : CERA Cat Part No F8030103 or equivalent .
Chromium plated toilet paper holder in repair complete all as specified and as directed. Make : Jaquar Cat Part No ACN 1153N or equivalent in CERA.
600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and as directed. Make : Jaquar Cat Part No ACN-1111NM or equivalent in CERA.
Soap dish in repair complete all as specified and as directed. Make : Jaquar Cat Part No ACN 1131N or equivalent in CERA.
Towel rack in repair complete all as specified and as directed. Make : Jaquar Cat Part No ACN 1181FN and equivalent in CERA.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
75mm thick cement concrete 1:3:6 type B-2 (using 40mm graded crushed stone aggregates) as in plinth protection/sub base complete all as specified and as directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Rendering 15 mm thick on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. (WPC shall be measured separtely)
Rendering 15 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 5mm thick in cement plaster 1:3 on fair faces of brick work or concrete surfaces as on ceiling complete all as specified and as directed.
Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed. Note :- Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency/applicator which will further have to rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise.
50 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.
Vitrified tile (Dura stone tiles) of size 300mm x 300mm x 10mm thick as in floors and over & including 20mm thick screed bed or bedding layer in cement mortar 1:6, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and as directed.
Machine cut kota stone slab flooring 18-20mm thick over cement screed base 15 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Light shade double charged glossy finish vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specifed and as directed.
Light shade double charged glossy finish vitrified tile, 600mm x 1200mm/800mm x 800mm or size as approved by Engr in charge of 10 mm thick (Square / rectangular) polished , area of each tiles exceeding 0.42 Sqm but n exc 1.00 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specifed and as directed.
Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specifed and as directed.
Non skid ceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18Sqm or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4 complete all as specified and as directed.
Glazed ceramic coloured tiles 300mm x 450mm x 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.
Glazed ceramic coloured tiles 300mm x 600mm x 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.
Wall cladding coloured tiles 300mm x 450mm x 7mm or 300mm x 600mm x 7mm for external surfaces size and design as approved by Engr in Charge as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.
Chequred Cement concrete tiles (glosy finish premium quality 300mm x 300mm x 40mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment complete all as specified and as directed.
Hand rails in repairs, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc complete all as specified and as directed.
0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed.
0.50mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550 Mpa as in roof covering, wall cladding with self tapping screws or 'L' type or 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions, including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed.
S&F in repairs solid PVC wall lining (wall panelling design and colour shall be approved by GE) consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement & PVC framework/beading as required and fixing at site on PVC frame, complete all as specified and as directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
Bickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed
Random rubble masonry square/rectangular, built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted complete all as specified and as directed.
Raised pointing to square rectangular, random rubble stone masonary in CM 1:4 complete all as specified and as directed.
Preparing new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.
Preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
Preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces in multistoried buildings complete all as specified and as directed.
Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.
Preparation of old wall surfaces with washing, rubbing down and stopping of distempered wall surfaces and applying one coat of OBD, white/ coloured complete all as specified and as directed.
Preparation of old decorative surface of wall and applying one coat of plastic emulsion paint white/coloured complete all as specified and as directed.
Applying one coat of cement base paint on old external wall surface up to G+2 floor height, including preparation of surfaces complete all as specified and as directed.
Complete removal of existing treatment (using removal machine) including preparing surfaces of wall and applying one coats of weather proof exterior emulsion paint (Asian Ultima APEX or Berger Weather Allguard or equivalent) over a coat of exterior weatherproof wall care putty up to G+2 floor height etc complete all as specified and as directed.
Preparation of old decorated wall/ceiling surfaces and applying one coat of wall care putty (Make: Birla or equivalent) up to G+2 floor height complete all as specified and as directed.
Preparation of old surfaces of any description over 10 cm in width of grith and applying one coat of varnishing complete all as specified and as directed.
Preparation of surface and applying textured painting (granular or impression type), any colour and any position complete all as specified and as directed.
Preparation of old painted wooden/Steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed. (Make : Smart Care Damp Block 2K/Dr. Fixit
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks staging and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed.
S&F in repair 1mm thick plate rack made of stainless steel, 600mm x 750mm x 250mm (weight not less than 7.5 Kg) including brackets and embedded in brick wall complete all as specified and as directed and as per manufacturers instruction.
Supply and fixing PVC tank lid for 500 to 1000 litre capacity including all locking arrangements, nuts, bolts etc for fixing complete all as specified and as directed.
Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.
Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.
Preparation of Old external wall and ceiling surface by complete removal of existing treatment of walls for upto 4 storey buildings and boundary walls by mechanised sander of Berger paints or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying One coats of weather proofing exterior acrylic emulsion paint premium Ist quality on wall surfaces and application of weather proofing exterior acrylic emulsion paint/Putty to be done through fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of minimum 1HP with a flow speed of minimum 1ltr per minute having a pressure of 3300psi complete all as directed”
Preparation of Old external wall and ceiling surface by complete removal of existing treatment of walls for upto 4 storey buildings and boundary walls by mechanised sander of Berger paints or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying one coats of cement base paint premium 1st quality on wall surfaces and application of cement base paint/putty to be done through fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of minimum 1HP with a flow speed of minimum 1ltr per minute having a pressure of 3300psi complete all directed.
VISHWANATH AND SONS
vmd traders
M/S ASHOK KUMAR PACHIALA
SINGH CONST CO
KALSOTRA CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .