SPECIAL REPAIR, REPLACEMENT OF EXISTING ELECTRICAL FITTING WITH LED AT CERTAIN BUILDINGS AND ALLIED WORKS AT 9 BRD UNDER GE (AF) LOHEGAON AT AIRFORCE STATION PUNE

Amount

Taking out old light fitting any type and size from pole/wall/ceiling complete all as specified and directed.

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc complete all as specified and directed.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire complete all as specified and directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board ) ISI Marked (IS:14772) for housing switches / sockets complete all as specified and directed.

One light point controlled by one switch.

M & L for Sub Main Wiring with FRLS PVC Insulated multistranded copper conductor wires of size 2x4.0 sq. mm + 1x2.5 sq. mm earth wire including PVC conduit/casing capping all fitting & fixture as required on site complete all as specified and directed. (Note : 2 run of 4 Sqmm , one run of 2.5 Sqmm and one run of PVC casing capping/Conduit shall be measured and paid as one length)

Supply and fix sheet metal enclosure MCB DB double door SPN 8 way 230 V with neutral link and with 200 A bus bar complete all as specified and directed.

Supply and fix MCB SPN 40 Amp, 230 volt 'C' series complete all as specified and directed.

S&F MCB SP 240 volt 6 to 32 A 'C' series complete all as specified and directed.

Supply and fix switch piano flush type 5 A one way complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing Energy efficent recess mounted LED panel luminaire 600 mm x 600 mm, 35/36 watt, lumen constant of 5700/6500K, 220 V AC with high quolity diffuser for uniform light & high efficiency soft glare free light made from CRCA sheet, pre coated white colour complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S & F street light fitting (in Repalcement) energy saving and environmental frindly long life LED Street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens embedded PC cover /toughened glass and impact resistance of IK07 and electronic driver fixed on pole with and including suitable dia size bracket as per manufacturer recommendation, bracket 1.5 m long complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed.

S & F Flood lights fitting (in Repalcement) energy saving and environmental frindly long life exclusive innovative flood light luminaries 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant with LEDs as light source and lens embedded PC cover /toughened glass and impact resistance of IK07 and electronic driver fixed on high mast pole or any any other place as requird on site incl making all nacessary arrangement for fixing complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F surface mounted LED down lighter with electronic driver 21 Watt powder coated aluminium housing with integrated electronic driver complete Iincluding making all nacessary arragement to fix and connection as required on site complete all as specified and directed.

S & F Recessed mounted LED down lighter with electronic driver 18 Watt complete Iincluding making all nacessary arragement to fix and connection as required on site complete all as specified and directed.

S & F LED Bollard 8 Watt with ABS housing & PC opal diffuser with independent electronic LED complete Iincluding making all necessary PCC foundation arragement to fix and connection as required on site complete all as specified and directed.

S & F High Bay Light 120 Watt energy saving and environmental friendly robost IP 65 protected LED medbay with PDC housing system efficiency not less than 120 lm/W including electronic driver suitable for ceiling (Surface/suspended) mount complete including making all nacessary arragement to fix and hanging down rod , ancchering and connection etc as required on site complete all as specified and directed.

M & L for 12 mm perforated particle board/tiles for insulation and accoustic purposes, 60x60cm in size suspended fslse ceiling including GI powder coated grid work using 32.5mmx23.5mmx1.5mm main tee, 25mmx23.5mmx1.28mm cross tee & 25mmx23.5mmx1.2mm angle fixed to wall for false ceiling including necessary supporting hanger with 6 mm dia GI wire & wire J bolts washer nuts for securing frame work to ceiling, suspended @ 125cm C/C bothways, size of grid shall be 605x605mm complete all as manufacturer instructions complete all as specified and directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

R k construction

M/S. Niksun Electro-Infra Private Limited

Rama Electricals

metro electrical services

N AND G CONSTRUCTION

M/S RANJAN AND DAUGHTERS GROUP