Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 LAccepted-AOC | L1 | Accepted-AOC being lowest bidder | |
| 2 | L2₹42.1 L+₹1.6 L (4.02%)Rejected-Finance | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹44.5 L+₹4.0 L (9.85%)Rejected-Finance NAGLA UDHA NEAR PRIMARY SCHOOL POST DHANOLI AGRA UP AGRA 282010 | AGRA | AGRA | UP | 282010 | L3 | Rejected-Finance Being higher bidder | |
| 4 | L4₹45.2 L+₹4.7 L (11.7%)Rejected-Finance | L4 | Rejected-Finance Being higher bidder | |
| 5 | Rejected-Technical | - | Rejected-Technical Not admitted being un enlisted |
| Sl No | Description | Qty | Unit | M/S R.K ENTERPRISES L1 | Balaji Associate L2 | laxmi enterprises L4 | MUKTA AND COMPANY L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | M&L for servicing of upto 40 KVA DG set including replacement Engine oil and all type of filters as per manufacturers manual. Opening, adjusting, tightening of tappet cover complete by torque wrench by applying proper pressure , cleaning of complete sump from sludge of dirt, oil etc. and refitting for DG set including drain out (used) engine oil and filling and topping up with new engine oil complete all as specified and directed.
Note:- (a) Engine oil will be measured and paid separately under respective items of schedule 'A'.
(b) Each servicing of DG Set will be required after 6 months or 250 hours working. | 11 | Each Job | 4,500 ₹49,500 | 4,000 ₹44,000 | 800 ₹8,800 Lowest | 6,000 ₹66,000 |
| 2.00 | Description all as per Ser No-01 above but 50-82.5 KVA capacity DG Set and ditto | 14 | Each Job | 4,800 ₹67,200 | 4,500 ₹63,000 | 800 ₹11,200 Lowest | 6,000 ₹84,000 |
| 3.00 | Description all as per Ser No-01 above but 100-180 KVA capacity DG Set and ditto | 16 | Each Job | 10,000 ₹1,60,000 | 7,500 ₹1,20,000 | 1,500 ₹24,000 Lowest | 8,000 ₹1,28,000 |
| 4.00 | Description all as per Ser No-01 above but 200-320 KVA capacity DG Set and ditto | 8 | Each Job | 18,000 ₹1,44,000 | 15,000 ₹1,20,000 | 2,000 ₹16,000 Lowest | 9,000 ₹72,000 |
| 5.00 | Description all as per Ser No-01 above but 400 KVA capacity DG Set and ditto | 3 | Each Job | 18,000 ₹54,000 | 20,000 ₹60,000 | 2,500 ₹7,500 Lowest | 12,000 ₹36,000 |
| 6.00 | Description all as per Ser No-01 above but 500 KVA capacity DG Set and ditto | 2 | Each Job | 24,000 ₹48,000 | 30,000 ₹60,000 | 2,800 ₹5,600 Lowest | 15,000 ₹30,000 |
| 7.00 | M&L For dismantling the engine of DG Set capacity 200 KVA (Cummins) for checking and repairing , overhauling work by opening complete engine head piston, cylinder and FIP unit including remote cylinder head covers & check valve clearance between rocker arms and valve stem end wirth filler guage as per the valve setting sequence 0.3mm for inlet valve and 0.5mm for exhaust valve reassembling the existing parts complete testing on full load all as specified and as directed by Engr-in Charge. Note :- Items required to make the DG set serviceable shall be measured and paid seperately under relevent item of schedule. | 1 | Each Job | 44,000 ₹44,000 | 45,000 ₹45,000 | 18,000 ₹18,000 | 15,000 ₹15,000 Lowest |
| 7.01 | (a) Supply only kit engine piston | 4 | Each | 6,000 ₹24,000 | 8,000 ₹32,000 | 4,800 ₹19,200 Lowest | 5,000 ₹20,000 |
| 7.02 | (b) Supply only piston liner kit | 4 | Each | 6,000 ₹24,000 | 7,000 ₹28,000 | 2,300 ₹9,200 Lowest | 5,000 ₹20,000 |
| 7.03 | (c ) Supply only Piston ring complete | 4 | Each | 3,000 ₹12,000 | 4,000 ₹16,000 | 1,900 ₹7,600 Lowest | 2,100 ₹8,400 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Dec 2025, 6:00 pmClosed
GE TECH AREA AGRA
Military Engineer Service Garrison Engineer (AF) Tech Area Agra -282008
REPAIR/ MAINT OF DG SETS AND AMF PANELS FOR STANDBY DG SET UNDER GE (AF) TECH AREA AT AF STATION AGRA
2025_MES_720521_2
8200-1728/E8
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
270 days
AF TECH ATREA AGRA
Class D category b(i)
8 documents required · 8 mandatory
₹500
Yes
GE TECH AREA AGRA
₹90,000
Yes
13 Feb 2026
25 Nov 2025
22 Dec 2025
25 Nov 2025
17 Dec 2025
10 Dec 2025
Description all as per Ser No-01 above but 50-82.5 KVA capacity DG Set and ditto
Description all as per Ser No-01 above but 100-180 KVA capacity DG Set and ditto
Description all as per Ser No-01 above but 200-320 KVA capacity DG Set and ditto
Description all as per Ser No-01 above but 400 KVA capacity DG Set and ditto
Description all as per Ser No-01 above but 500 KVA capacity DG Set and ditto
M&L for servicing of upto 40 KVA DG set including replacement Engine oil and all type of filters as per manufacturers manual. Opening, adjusting, tightening of tappet cover complete by torque wrench by applying proper pressure , cleaning of complete sump from sludge of dirt, oil etc. and refitting for DG set including drain out (used) engine oil and filling and topping up with new engine oil complete all as specified and directed. Note:- (a) Engine oil will be measured and paid separately under respective items of schedule 'A'. (b) Each servicing of DG Set will be required after 6 months or 250 hours working.
(a) Supply only kit engine piston
(b) Supply only piston liner kit
(c ) Supply only Piston ring complete
(d) Supply only oil seal rear
(e) supply only bearing thurst
(f) Supply only sleeve injector
(g) Supply only valve inlet
(h) Supply only valve exhaust
(j) Supply only valve seal complete
(k) Supply only valve seat
(l) Supply only ring liner seal
(m) Supply only gear wheel complete
(n) Supply only gasket of head gaskets, body gaskets complete
(o) Supply only CR Bearing complete
M&L For dismantling the engine of DG Set capacity 200 KVA (Cummins) for checking and repairing , overhauling work by opening complete engine head piston, cylinder and FIP unit including remote cylinder head covers & check valve clearance between rocker arms and valve stem end wirth filler guage as per the valve setting sequence 0.3mm for inlet valve and 0.5mm for exhaust valve reassembling the existing parts complete testing on full load all as specified and as directed by Engr-in Charge. Note :- Items required to make the DG set serviceable shall be measured and paid seperately under relevent item of schedule.
Supply only Engine oil 15 W / 40 complete all as specified and directed. Make :Castrol / HP / Bharat Petrolium / Valvoline
S&F in renewal of battery terminal brass(heavy duty)with nuts & bolts for battery (as per sample) complete all as specified and directed.
Supply and filling distilled water suitable for DG set complete all as specified and directed.
Supply only of coolant suitable for radiater of DG sets complete all as specified and directed. Make: HP/TVS / Valvoline / KIRLOSKAR
Litre
Taking down old repairable Radiator by opening nut/bolt from foundation and loading/unloading and transportation to local market for checking, testing for any defects and repairing as below : - Cleaning, washing the copper tubes and Top to bottom Copper fins Frame of the radiator by acid process. Checking the leakage if any and repairing the same by doing the Soldering and Testing radiator with loading/unloading and transportation & including refixing to its old position with proper accuracy and correct situation for Capacity from 63 KVA to 200 KVA DG sets including renewal of nut/bolt, hose pipe sets with clamps and testing complete all as specified and directed.
M & L for disconnection, taking down and repairing of alternator DC from DG set engine with rewinding of armature ,renewal of carbon brushes, renewal of bearings, rewinding of field coil assembly, renewal of connection plate, reassembling and refixing to DG set engine after necessary repair for following sizes complete all as specified and directed:-
M & L in renewal of flywheel ring with proper setting and alignment for 100 to 160 KVA DG set complete all as specified and directed.
M & L for renewal of Magnetic Pickup suitable for 100 KVA & 200 KVA DG set complete all as specified and directed. Make:- Cummins / KIRLOSKAR / GREAVES COTTON
S&F in renewal for Shut down valve solenoid suitable for all capacities of DG set complete all as specified and directed.
S&F in renewal for Thermostat of suitable for all capacities of DG set complete all as specified and directed.
S&F in renewal for Diaphramg coupling for upto 62.5 KVA DG set capacity complete all as specified and directed.
S&F in renewal for Air Cleaner Assembly for upto 62.5 KVA DG set capacity complete all as specified and directed.
S&F in renewal for copper Battery lead of 25 Sqmm, 2mtr long suitable for all capacities of DG set complete all as specified and directed.
S&F in renewal for Feed pump suitable for all capacities of DG set complete all as specified and directed.
S&F in renewal for Injector assembly for 62.5 KVA to 200 KVA DG set complete all as specified and directed.
S&F in renewal for V Belt / Fan belt suitable for all capacities of DG set complete all as specified and directed.
S&F in renewal for Diesel pipe suitable for all capacities of DG set complete all as specified and directed.
S&F in renewal for Hose Flexible suitable for for all capacities of DG set complete all as specified and directed
M&L for disconnecting, dismantling and overhauling of fuel injector pump of DG set capacity 15 KVA to 82.5 KVA including overhauling, calibration and testing at admissible pressure properly complete all as specified and directed.
Supply & fixing in renewal of Nozzle for 15 KVA to 82.5 KVA DG set complete all as specified and directed.
Supply & fixing in renewal of F.I.P. Elements for 15 KVA to 82.5 KVA DG set complete all as specified and directed.
M&L for disconnecting, dismantling and overhauling of fuel injector pump of DG set for capacity 100 KVA to 200 KVA including repair, overhauling, calibration, testing complete and refixing to its original position properly complete all as specified and directed.
Supply & fixing in renewal of A.V.R suitable for 20 KVA to 200 KVA DG set complete all as specified and directed. Make:- KIRLOSKAR / AE / NATIONAL.
M & L for dismantling of defective water pump assembly by disconnecting of hose pipe connections, fanbelt, radiator connection and supply and fixing of new water pump assembly suitable for DG set capacity for 40 KVA to 200 KVA including renewal of u/s hose pipes, fan belt, nut/bolts etc complete all as specified and directed. Make:-- KIRLOSKAR / Cummins / GREAVES COTTON.
Supply & fixing in renewal of fully automatic battery charger input 230V AC SMPS based) and out put 24V DC for 24 volt battery complete all as specified and directed. Make :- KIRLOSKAR / ELECT INDIA / Cummins / UNITEK INDIA .
Supply & fixing in renewal of fully automatic battery charger input 230V AC SMPS based) and out put 12V DC for 12 volt battery complete all as specified and directed. Make :- KIRLOSKAR / ELECT INDIA / Cummins / UNITEK INDIA
Supply & fixing in renewal of Battery- 12 Volts,180 AH for DG set complete all as specified and directed. Make: EXIDE / AMARON / or equillvant with 18 month replacement warranty
Supply & fixing in renewal of Battery- 12 Volts,150 AH for DG set complete all as specified and directed. Make: EXIDE / AMARON / or equillvant with 18 month replacement warranty
Supply & fixing in renewal of Battery- 12 Volts,120 AH for DG set complete all as specified and directed. Make: EXIDE / AMARON / or equillvant with 18 month replacement warranty
Supply & fixing in renewal of Battery- 12 Volts,75 AH for DG set complete all as specified and directed. Make: EXIDE / AMARON / or equillvant with 18 month replacement warranty
M&L For taking down the DG Set of capacity 40 KVA to 200 KVA from existing location by disconnect the electrical connection and connected earthing connections and shift the same to another location by lifting with suitable capacity crane and keeping at new location and making connection of electrical cables to existing network and earthing infrastructure complete all as specified and directed.
Checking of AMF panel & DG set for detecting any kind of fault in AMF panel & DG set and attending the fault immediately at any time round the clock and carry out certain repair as per site requirement and checking of AMF panel and DG set for power suply from DG set through AMF panel and replacing of worn out parts of AMF panel & DG set by expert engineer complete all as specified and directed. Notes :- (a) Replacement of worn out parts of AMF panel/DG set shall be measured and paid separately under items of schedule 'A' as supply only. (b) Charges for detecting the fault in AMF Panel/electric system/DG set are included in the quoted item rate.
Supply only of Electronic Timer, auxilary supply-240 VAC/24 VDC for 125 KVA to 200 KVA DG set. Make: AE/ EAPL / MINILEC OR Equivalent as approved by the GE.
S & F in renewal of Genset Controller Panel suitable upto 125 Kva make and model as per site or directed.
Supply only of Relay-24 VDC/ 12 VDC / 220 VAC / 240 VAC for AMF panel of DG set. Make: CUMMINS( AX1012821 ) / OMRON / SALZER / PLA OR Equivalent as approved by the GE.
Supply & fixing in replacement of Contactor- 3/4 Pole, 225 Amp/ 200 Amp for 125 KVA DG set AMF panel with replacement of lugs and checking of all connections etc complete all as specified and directed Make:- LEGRAND ( 4162 96 ) / L &T / SCHNEIDER / C & S .
Supply & fixing new in replacement of Contactor- 3/4 Pole,150 Amps/ 140 AMPS for 62.5 KVA DG Set AMF panel with replacement of lugs and checking of all connections etc complete all as specified and directed. Make:- LEGRAND ( 4162 66 ) / L &T / SCHNEIDER / C & S as approved by the GE..
Supply & fixing in replacement of Contactor of 4 Pole, 250 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etccomplete all as specified and directed Make:-SCHNEIDER ( LC1F1504 ) / L &T / C & S as approved by the GE.
Supply & fixing in replacement of Contactor of 4 Pole, 320 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc complete all as specified and directed Make:-SCHNEIDER / L &T / C & S as approved by the GE.
Supply & fixing in replacement of Contactor of 4 Pole, 400 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc. complete all as specified and directed Make:-SCHNEIDER / L &T / C & S as approved by the GE.
Supply & fixing in replacement of Contactor of 4 Pole, 630 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc. complete all as specified and directed Make:-SCHNEIDER / L &T / C & S as approved by the GE.
Supply & fixing in replacement of Spare Contact Kit for Contactor-400 Amps 3/4 pole suitable for 200 KVA DG Set complete all as specified and directed. Make:- L & T ( CS94084) / SCHNEIDER / C & S as approved by the GE.
Supply & fixing in replacement of MCCB, 200 Amp, 4 pole, 36 KA , 415 Volt including taking out existing connections, cable lugs etc complete all as specified and directed. Make:-L & T / Legrand / HAVELLS as approved by the GE.
Supply & fixing in replacement of AMF Controller device for Auto/ Manual function for 200 KVA to 500 KVA DG set complete all as specified and directed. Make: Automation Electronics / ELECT INDIA OR Equivalent as approved by the GE.
Supply & fixing in replacement of Solenoid stopper ( Solenoid Fuel Pump ) upto 125 KVA DG set complete all as specified and directed Make:--Cummins ( 3928160 ) / Kirloskar / or Eqivalent as approved by the GE.
Supply & fixing in replacement of Self Engine Stop Relay Device for 63 KVA to 180 KVA DG set AMF panel complete all as specified and directed Make: Automation Electronics / Elect India as approved by the GE.
Supply & fixing in replacement of Changeover switch (Open Execution, Front operated) of 200 Amps, 4 Pole, 415 V, 50 Hz. Make: HAVELLS/Legrand/Indoasian as approved by the GE.
Supply & fixing in replacement of Changeover switch (Open Execution, Front operated) of 125 Amps, 4 Pole, 415 V, 50 Hz. Make: HAVELLS/Legrand/Indoasian as approved by the GE.
Supply & fixing in replacement of AMF Relay Box for Auto/ Manual function including voltage monityor system and fully auto and manual system for 63 KVA to 200 KVA DG set.
Make: AE/ ELECT INDIA OR Equivalent as approved by the GE.
M & L for repairing of PT pump complete with replacement of drive accessories, plunger and barrel, weight/courier,oil sheets etc including machinery work for 125 KVA to 160 KVA DG set complete all as specified and directed.
Supply & fixing shaft governor weight (3006718) for repairing of PT pump for 125 KVA to 160 KVA complete all as specified and directed.
Supply & fixing oil seal (3006738) for repairing of PT pump for 125 KVA to 160 KVA complete all as specified and directed.
Supply & fixing gasket set fuel pump (3010242) for repairing of PT pump for 125 KVA to 160 KVA complete all as specified and directed.
S&F in repair sleeve turbocharger (216802) for repairing of Turbo charger for capacity from upto 200 KVA DG Set complete all as specified and directed.
M & L for dismantling and replacement of Injector assembly (3239796) for 62.5 KVA to 200 KVA DG set complete all as specified and directed.
Supply & fixing in replacement of Under volt/over volt relay-ON/OFF delay time (1 to 15 sec ),sensing supply 415 Volt for 63 KVA to 400 KVA DG set complete all as specified and directed Make-AE/ PIC / MINILEC OR Equivalent as approved by the GE.
M&L for cleaning the fuel tank of DG Set of any capcity by taking out the existing fuel in container , keeping aside in safe custody and cleaning the sludge inside the tank and disconnect the inlet, outlet fuel connections if required and refilling the fuel after cleaning the tank and reconnection all inlet and outlet connections and all as specified and directed.
Taking out alternator of 62.5 KVA to 100 KVA DG sets of any make, rewinding with super enamelled copper wire of suitable gauge, varnishing, changing insulating material, assembling, testing and connecting to DG set complete all as specified and directed by Engr-in-Charge Note:- Rates quoted by contractor deemed to be included the rates for tranportation of alternator from site to workshop.
M&L for Field coil rewinding of alternator of 62.5 KVA to 100 KVA capacity DG sets of any make, rewinding with super enamelled copper wire of suitable gauge, varnishing, changing insulating material, assembling, testing and connecting to DG set complete all as specified and directed by Engr-in-Charge Note:- Rates quoted by contractor deemed to be included the rates for tranportation of alternator from site to workshop.
S&F MCCB 4 Pole Thermal adjustable breaker type complete all as specified and directed of following capacity. Make :- Legrand / L&T / Siemens or other equilent as approved by the GE.
63 AMP, 16 KA
125 AMP, 25 KA
160 AMP, 25 KA
200 AMP, 25 KA
Supply and Fixing in replacement of Copper lead single core PVC insulated 16Sqmm multi stranded copper conductor
Supply and Fixing in replacement of Copper lead single core PVC insulated 25Sqmm multi stranded copper conductor
Supply, in renewal of fabricating and testing of factory made/fabricated cubical type bypass panel outdoor type with degree of protection IP-65 conforming to IS-2147, suitable for 100 KVA/125KVA capacity DG Set, fabricated using 14 Gauge CRCA sheet, powder coated comprising of suitable rated copper bus bar to interconnect the Change over No-01 to No-02 ,Onload Change over switch of capacity 160Amp 4pole 415 volts -02 No R ,Y, B LED Indicating lamps provn of connecting incoming and outgoing cables with preper cable glands of adequate size and the angle iron frame to mount the panel at height of 45cm from ground level with PCC 1:3:6 by 20mm aggregate all as specified and directed.
by Engr-in-Charge Note:- Rates quoted by contractor deemed to be included the rates for tranportation of alternator from site to workshop.
Supply, in renewal of fabricating and testing of factory made/fabricated cubical type bypass panel outdoor type with degree of protection IP-65 conforming to IS-2147, suitable for 400 KVA capacity DG Set, fabricated using 14 Gauge CRCA sheet, powder coated comprising of suitable rated copper bus bar to interconnect the Change over No-01 to No-02 ,Onload Change over switch of capacity 630Amp 4pole 415 volts -02 No R ,Y, B LED Indicating lamps provn of connecting incoming and outgoing cables with preper cable glands of adequate size and the angle iron frame to mount the panel at height of 45cm from ground level with PCC 1:3:6 by 20mm aggregate all as specified and directed.
Taking out alternator of 20 KVA to 50 KVA DG sets of any make and rewinding the alternator with super enamelled copper wire of suitable gauge, varnishing, changing insulating material, assembling, testing and connecting to DG set complete all as specified and directed
400 Amp capacity
Supply & fixing in replacement of Tube injector for fuel supply for 100 KVA to 200 KVA DG set. Make: CUMMINS ( 3964706 ) / KIRLOSKAR as approved by the GE.
630 Ampcapacity
315/320Amp capacity
250Amp capacity
200Amp capacity
160Amp capacity
300 Sqmm 3.5 Core.
Supply and Laying including taking down old u/s XLPE insulated LT UG cable PVCsheathed , bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor cable IS 7098 (Part-I) laid in trenches or fixed on wall/floor/poles etc of following size complete all as specified and directed.
400 Sqmm 3.5 Core.
120 Sqmm 3.5 Core.
95 Sqmm 3.5 Core.
Excacation in trenches in soft/hard soil n. exc 1.5 m wide and n. exc. 1.5 m in depth for laying cables and getting out complete.
Return filling in including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in hard/dense soil after cable are laid and tested complete.
Removing excavated surplus soil to a distance n. exc. 50m and deposited where directed at a level n. exc.1.5m above the starting point complete.
M&L for sand filing with clean dry fine sand unsashed including gently punning around cables in trenches for cable protection complete all specified and directed. Note : punned thickness shall be considered for payment.
Supply & Laying sub class 'B' briks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.
M&L in repair 50 mm dia GI tubing light grade with all fittings such as tee, bend,elbow,reducer, socket etc for earthing lead protection of under ground /on wall complete all as specified and directed.
M&L in repair 80 mm dia GI tubing light grade with all fittings such as tee, bend,elbow,reducer, socket etc for earthing lead protection of under ground /on wall complete all as specified and directed.
M&L for earthing in replacement with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth, GI strip of size 25x4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point ,PCC pit with angle iron frame 300 x 300mm size, Machine cut Jodhpur stone slab pit cover 300x300 mm size with 12mm MS Rod handle for lifting, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work complete all as specified and directed by Engr in Chanrge.
Supply and Install , testing and commissioning of Onload change over switch front handle operated type , 4 pole, 415 volts with sheet steel enclosure of made by 3.2 mm thick CRCA sheet outdoot type along with pedestal to grout in PCC foundation and Indication lamps of R, Y, B for three phase supply indication including taking down existing one complete all as spcified and directed of following capacity :-
Supply & Filling Adblue diesel exhaust fluid to reduce the carbon polution from exhaust gas of DG set complete all as specified and directed.
Supply and fix in replacement of rectifier diode assembly suitable for DG set of capacity range from 40 to 100 KVA houding in alternator with electrical connections complete all as specified and directed.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
1728Tender2.pdf
Tender Documents • 1.52 MB
BOQ_830212.xls
BOQ • 2.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .