Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹24.5 L+₹6,965.28 (0.28%)Rejected-Finance 2ND 6 KEDIA HOUSE MA ROAD BYELANE 1 REHABARI GUWAHATI ASSAM 781008 | KAMRUP METRO | ASSAM | 781008 | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹24.5 L+₹8,505.28 (0.35%)Rejected-Finance | L3 | Rejected-Finance Other than lowest quoted tenderer | |
| 4 | L4₹26.9 L+₹2.5 L (10.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest quoted tenderer | |
| 5 | L5₹27.6 L+₹3.2 L (13.0%)Rejected-Finance AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L5 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
Refer Docs
EMD Value
₹64,300
Closing Date
16 Oct 2021, 6:00 pmClosed
CWE Allahabad
HQ CWE New Cantt Allahabad
SPECIAL REPAIR OF BLACK TOP ROAD IN OFFICE AREA OF CETF BN (TA) GR AT NEW CNATT ALLAHABAD UNDER GE WEST ALLAHABAD.
2021_MES_474109_1
81635/W/E8
Open Tender
Civil Works
Item Rate
180 days
Allahabad
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (West) Allahabad
₹64,300
Yes
6 Nov 2021
9 Sept 2021
18 Oct 2021
10 Sept 2021
16 Oct 2021
1 Oct 2021
Amount
M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm with paving bitumminous primer VG-10 grade and putting required (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% paving binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller for pot holes exc 30mm depth complete all as specified and directed.
M&L for bituminous macadam with hot mix plant using crushed stone aggregete of specified grading premixed with bitumen VG-30 grade as binder @ 4% by weight of total mix transporting the hot mix and filler to work site, spreading and laying with a hydrostatic mechanical paver and roller to required camber/ gradient rolled and compacted to smooth uniform surface with vibratory and tandem 8 to 10 ton power roller to achieve desired compaction (consolidated thickness 75mm or less complete all as specified and directed.
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.
M&L for cleaning old dirt, oil/ grease spots and foreign materials etc, from road surface and applying 2.5mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved, having clear and sharp edges over road surfaces by using thermo plastic paint applicator machine and necessary T&P, including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer, making proper arragement for traffic during operation etc. complete all as specified and directed. NOTE: Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecto rizing beads in required proportion as per MORTH specification and conforming to relavent IS.
S&F in repair cat eyes ABS body with scratch and abrassion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses, temperature resistance body of size 90x110x17mm fixed on road with bituminous adhesive as per manufactures instruction having resistant creamer coating and reflective surface complete all as specified and directed. Make-3M/Dark Eye/ Avery denson
S&F solar stud alumininum alloy powered with high efficiency solar monocrystalline solar panel (2.4 V/0.3 watt) one Ni-MH or Ni-cd rechargeble battery (1.2V/1600 MA) with 6 super bright LEDs, with 10000 to 18000 Mcd (Milicandela), dimension-125mm x125mmx25mm (100% water proofing design according to 65mm shank) including adhesive for fixing arrangement complete all as specified and directed. Make:- Dark Eye (DHRUV) or equivalent as approved.
Aditi Construction Company
M/S NAGENDRA AND BROS ENTERPRISES
Airways Enterprises
M/S A P CONSTRUCTION
M/S ATUL CONSTRUCTION
M/S KESHRI WORKERS
G S ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .