REPAIR AND RESTORATION OF ALL SANNATHI, MANDAPAM, PROVIDING NEW PRAHARAM MANGALORE TILES MANDAPAM, PROVIDING NEW CUT STONE FLOORING AND RECONSTRUCTION OF THIRUMADHIL WALL IN ARULMIGU MARIYAMMAN TEMPLE, THIRUVENGADU, SIRKAZHI TALUK AND MAYILADUTHURAI

Amount

Providing scaffolding charges for Vimanam/Gopuram with casurina posts coconut or palm trees wherever necessary for main formwork and providing with net lawn/pvc mesh coveribg, providing ladder arrangements, country wood plank for working inspection etc., complete Hire charges only for errection and maintenance and removing the same on completion of work. as per standard specification.

15'0" height

Scraping the decayed lime plastered from the surface of vimanams and gopuram, carefully including isolated bricks of brick work without damaging the varivargams racking out the joint cleaning the surface with water including all working in heights, hire charges for special tools, brushes etc., complete as per standard specifications.

15'0" height

Painting with multicolour (Panchavarnam) good water based exterior emulsion paints complete for the Vinamans/Gopurams, including cost and conveyance of all materials, lobour charges including Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.

15'0" height

Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of Floor finish and dadooing walls in cement mortar with Mosaic Tiles/ Glazed Tiles/ Cuddapah slabs etc., complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of walls Chipping of concrete and roughening the surface etc., complete complying with standard specification.

Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of walls brick/stone masonary in Cement mortar under 3m height etc., complete complying with standard specification.

Earthwork excavation for foundation in all soils except hard rock requiring blasting to a full depth with initial lead of 10 m and lift of 2m etc., complete (SS 20B)

Supplying and filling in foundation and basement with filling sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant standard specification including cost of supplying filling sand etc.,complete as per standard specification.

Cement concrete 1:5:10 (One of cement five of sand and ten of HBG jelly) for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete in respects complying with relevant Std, Specification and as directed by the Department Officers.

Providing and laying in position, Standardised concrete mix M-20 grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticier) in recommended proportions as per IS:9103 to accelerate, rated setting of concrete improve workability without imparing strength and durability without (5 cum) 7730kg, of 20mm machine crushed stone jelly and with about (3.30 cum) 5156kg, of 10 - 12 mm machine pressed stone jelly and with about (4.79 cum) 7670kg of sand, but excluding cost of reinforcement grill an fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibraters, finishing, curing etc., and providing fixtures like fan clams in the RCC floor/ roof slabs where ever necessary without clamping etc., complete as per the standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and Basement

Superstructure

Supplying and fabricating and placing in position MS grills for reinforcement including cost of steel for all works. The rate including cost of binding wire also (SS NO 134)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Foundation and Basement

Columns

Brick work in cm 1:5 using Third class Country bricks of size 83/4" x 41/4" x 21/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc., complete complying with standard specification.

Plastering with Cement mortar1:5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc., complete complying with standard specifications.

Supply and fixing of country wood (iluppai) scantling rafters and planks arrangemetns for garbagraham and roof including cost and conveyance of all materials.

Best tiled Roofing with Mangalore tiles including teak reapers (schedule item no ) including cost conveyance of all material and all labour charges fixing in position etc., complete as per the standard specification.

Supplying and paving fixing with New Cut stone of sizes suitable for site requirement not less than 100mm thick size and top surface dressed with machine cut edges inculding pointing lime mortar 1:1.5 including cost and conveyance of all materials and all labour charges etc., complete as per the standard specification. (Closed Roof Area)

Supplying and paving fixing with New Cut stone of sizes suitable for site requirement not less than 100mm thick size and top surface dressed with machine cut edges inculding pointing lime mortar 1:1.5 including cost and conveyance of all materials and all labour charges etc., complete as per the standard specification. (Open to sky)

Plastering with Lime mortar1:1.5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc., complete complying with standard specifications.

Painting two coats with approved water based Exterior/interior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification.

Supplying & fixing Teak wood temple type door (Temple pattern ornamental doors with high quality teak wood (country) with 2" minimum to 7" maximum thick ornamental frames, 2" thick to 5" thick kamala (flower planks), creeper, birds, animal figures sculptures, etc., back side 1" thick to 3" plank including necessary carving, shaping, wastage, etc., as per approved plan and design. (page.no.163, 2a)) including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc., complete complying with standard Specifications.

Below 7' (feet)

Electrical Arrangments

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with metal box and 6A 1 way modular Switch in flush with wall with suitable modular front plate cover for making good of the concealed portion for PVC concealed light point /fan point for Electronic Regulator) (4 Points Per Coil) (AnchoRoma/Equivalent) (DATA A) Lower End

Wiring with 2 xl.5 sq.mm.(22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator)( 5 points / Coil)Lower End(DATA B)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with metal box and 6A 1 way modular Switch in flush with wall with suitable modular front plate cover for making good of the concealed portion for PVC concealed light point /fan point for Electronic Regulator) (6 Points Per Coil) (AnchorRoma/Equivalent) (DATA -C)

Supply and fixing of single box type 4'20 W LED fitting with TW round blocks on wall or celling with PVC unsheathed Copper leads from terminals to the fitting.(DATA - E)

supply and fixing of BOW LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B)with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. (SD 447)

supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.(SD449)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40 A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Lower End(SD 515)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp(SD 107)

Supply and fixing of Havells JETAALBA - FLOOD LIGHT - 70W LED Fitting with Necessary Wall Grouting clamps with Fixing bolts on ceilling with PVC unsheathed Copper leads from terminals to the fitting.(DATA L)

Supply and fixing of4 nos.6A two module 5 pin socket,4 nos. 6A one module switch on suitable module surface mounting Box(Plastic)with module cover plate (plastic) on wall with connections. Higher End(SD391)

Supply and fixing of300mm (12")sweep (light duty) AC exhaust fan complete without provision of hole in the wall(SD115)

Supply and Run of 2 of 2.5 sq.mm.(36/0.3)PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2 X 2.5 Sq.mm Copper Wire and making good ofthe concealed portion with suitable colour.(SD 337)

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG in suitable size HDPE cable in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good (SD 175

Supply and fixing of4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End(SD 539)

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit(500V)32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Double Pole RCD / RCCB(Lower End) with suitable necessary

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GI pipe of dia not less than 40mm with copper earth plate ofsize 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD211)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (SD371)

Sub total

GST 18% on Sub Total

muthukumar (BID ID -1228416)