Annual Sanitary stage in Non teacing quarters guest hosue faculty residenvce and other Academic buildings home Science deptt Biotechnology Law school DDE at New Campus Stage 2021 21

Amount

P&L of G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches (Parkash Surya/Jindal) 15 mm nominal bore

------------do------------- 20 mm nominal bore

------------do------------- 25 mm nominal bore

Making connection of G.I. distribution branch with G.I mains of 25mm to 40mm nom. bore by providing & fixing of Tee by cutting & threading the pipe complete.

P&F of Ball Valve (Brass) of approved make including handle. 15 mm nominal bore

------------do------------- 20 mm nominal bore

------------do------------- 25 mm nominal bore

P&F of 15mm nominal bore brass bib cock of approved quality weighing not less than 400 gms.

P&F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware /Hind ware /Cera)

P&F of solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ /Cera)White colour

P&F white vitreous china water closet squatting pan.( Indian type) Orissa Pattern W.C. pan ofsize 580 x 440 mm (Parryware/ Cera/Hindware)

P&F low level PVC flushing cistern with manually controlled device (handle lever) conf. To IS:7231 with fitting & fixtures complete (Parry ware / Hind ware /Cera) 10 Liter Capacity – White

P&F of white vitreous china wash basin including making all connection but excluding the cost of fitting Flat Back W/basin of size 550 x 400mm (Parry ware /Hind ware/ Cera)

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade. 6 mm thick hard board backing Rectangular Shape 453x357 mm.

P&F of C.P brass close hole basin mixer of approved quality & make (Parko/Chilly/Cera Make). 15 mm nominal size

P&F of PTMT pillar cock 'Prayag Make' 15 mm nominal bore. 107mm long weighing not less than 110 gms.

P&F of C. P. brass bib cock of 'Parko/Cera/Jainco Make' 15 mm nominal bore

P&F of PTMT bib cock ‘Prayag Make’ 15 mm nominal bore, 86 mm long weighing not less than 88 gms.

P&F of CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Cera/Jainco Make’ 15mm nominal bore

P&F of PTMT angle valve/stop cock for basin mixture Geyser points/washbasins of ‘Prayag Make’ 15mm nominal bore, 86 mm long weighing not less than 88 gms.

P&F of Brass Phase for C.P pillar cock/bib cock 'ISI Marked' 15 mm nominal bore

P&F of PVC waste pipe for sink or wash basin including PVC waste fitting complete Semi Rigid pipe 32/40 mm dia

P&F of PTMT Grating (Prayag Make) 100 mm dia

Providing and fixing Phase washer/Jumper washer.

P&F of C.P brass waste coupling of 32/40 mm nom size for steel sink coupling/washbasin of approved quality

P&F of PTMT waste coupling of 32/40 mm nom size for washbasin/steek sink coupling 38 mm of 83 mm length and 77 mm breadth.

P&F of of unplasticised PVC connection pipe with bass union 45 cm length & 15 mm nominal bore.

P& F CP jet with PVC pipe to be fixed with WC

P&F of P.V.C. siphon set to be fixed in cistern of approved quality

P&F of PVC cistern bend pipe of standard size

Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality, colour and make, weighing not less than 300 gms (Prayag Make).

P&F of low level cistern Handle (PVC) of approved quality.

Providing and laying PVC pipe superior quality of following dias (Uniplas, Supreme, Finolex make) 4 kg/cm2 pressure in ground/on walls in case of Rain Water Pipe including all PVC fittings jointing with adhesive of approved make ,making good the same etc. complete. Nothing extra shall be paid. 80 mm dia

--------do------- 110 mm dia

--------do------- 150 mm dia

P&F of PVC bend of Supreme/Finolex/Uniplas Make 80 mm dia

--------do------- 110 mm dia

--------do------- 150 mm dia

Providing and fixing PTMT towel rail including end brackets cost of wooden/PVC plugs with screw complete of size 600 x 20 mm of approved make. (Prayag Make).

Providing and fixing PTMT soap dish of approved quality and make. (Prayag Make).

Providing and placing on terraces Polyethylene water storage tank ISI: 12701 marked with cover & suitable locking arrangement & making necessary holes for inlet outlet & overflow pipes but without fittings of Sintex/Star make.

Providing and fixing PVC Floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the floors. 110 mm inlet and 110 mm outlet

------------do------------- 110 mm inlet and 80 mm outlet

P&F of Salem Stainless Steel A ISI 304 Laboratory / kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fitting & brackets & cutting & making good the walls wherever required 610x460mm & Bowl depth 178 mm/200mm.

P&F of C.P shower rose with 15/20 mm inlet including rod with necessary plugs and screws.100 mm dia

P&F of PTMT shower rose with 15/20 mm inlet including rod with necessary plugs and screws. 100 mm dia

Dismantling old floor traps & refitting the same with C.Conc.1:2:4 including jointing the waste water line including labour & material complete.

P&F of P.V.C. water tank covers on existing water tanks of standard size (Sintex/Star Make).

P&F of C.P. Cup of brass.

P&F of C.P. nipple 50mm long & 15mm nom bore

Making platform with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) for Indian W.C Seat complete including cost of material & labour.

P&F of C.P long bend for low level cistern

Cleaning of Manholes including clearing of drain pipes from manhole to manhole for making the lines fully functional and disposal of mulba outside the University Campus.

Cleaning of overhead water storage tanks upto floor-5 level (Steel/PVC/Concrete) by Six Stage Cleaning Process. ( Work to be got executed from approved license holder) Stage 1- Mechanical Dewatering A manhole and surroundings are to be cleaned off dirt, mud and algae thereafter the water below the foot-valve level shall be pumped out using special dewatering equipment. Stage 2- Sludge / Slit Removal The sludge which has se ttled on the floor of the tank shall be sucked out using sludge pumping equipment including removal of all type of scaling. Stage 3- High Pressure Cleaning The walls and the floor of the tank shall be thoroughly cleaned using special high pressure jet cleaner which rid of the walls and floor off calcinations, silage and all contaminants which cling on the internal surface of the tank helping the micro-biological contamination to grow. Stage 4 – Vacuum Cleaning An industrial vacuum cleaner shall be used to remove the resultant contaminants, making the tank absolutely spec-free. Stage 5 – Anti-Bacterial Spray This is important stage in which the tank shall be made totally sterile from bacteria using approved anti bacterial spray. Stage 6 – UV Radiation The final sterilization and disinfection shall be done by using UV radiation specially developed UV radiator which is used to kill any suspended or floating bacteria remaining in the tank. PVC / Steel / Concrete water tanks upto 2000 Liters

----------do---------- PVC/Steel/Concrete water tanks above 2000 Ltrs. to 5000 Ltrs.

P&F of CP grating 100 mm nominal dia

P&F of CP Heads of Bib cock/ Pillar Cock / Angle valves to existing fixtures

Providing and fixing C.P Brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931a ) 15 mm nominal bore

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated Aluminum rod with L.P/H.P.H.D plastic ball (Prayag make) 15 mm nominal bore, 105 mm long, weighing not less than 138 gms.

P&F of GI Accessories for repair work (ISI Make). Nipple 15 x 100mm

-----------do------- Nipple 15 x 150 mm

---------do------------ Nipple 20x50 mm

---------do------------- Nipple 20 x 75 mm

----------do----------- Nipple 20 x 100 mm

-----------do------------- Nipple 20 x 150 mm

---------do----------- Elbow 20mm nominal bore

----------do---------- Elbow 25mm nominal bore

------------do----------- Elbow 15 mm nominal bore

---------do----------- Union 15 mm nominal bore

---------do------------ Union 20 mm nominal bore

----------do------------ Union 25mn nominal bore

----------do------------ Socket 15 mm nominal bore

---------do------------ Socket 20 mm nominal bore

-------do------------ Socket 25 mm nominal bore

---------do---------- Tee 15 mm equal nominal bore

-------do----------- Tee 20 mm equal nominal bore

--------do------------ Tee 25 mm equal nominal bore

P&F of G.I Tank Nipple 20 mm nominal bore

P&Fof G.I Tank Nipple 25 mm nominal bore

Labour for fitting of Geysers to suitable location including cost of rawl plugs (Geysers to be provided by the Department/occupant)

Supply of labour for different works 2nd class plumber

-----------do------------- Mazdoor

Dis-assembling of motor pump (upto 2 HP) and refitting the same (excluding the cost of repair of pump)

P&F of PVC ball cock with float valve complete for low level WC Cistern (Jindal/Cera Make)

P&F of ball valve (brass) with float valve complete for OHT of approved quality. 15 mm nominal bore

----------do----------- 20 mm nominal bore

-------------do--------- 25 mm nominal bore

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively.

P&F White vitreious china urinal partition of size 755x165x365 mm (Hindware/Parryware/Cera)

M/S PARVEEN SINGH RAINA CONTRACTOR

PAROSHTAM LAL