SPECIAL REPAIRS TO BLDG NO T-54 OLD STN HQ CONF HALL AT THE MARATHA LIRC AND PROVN OF CONNECTING INTELOCKING PATH INCLUDING TOE WALL FROM MAIN ROAD UNIT MANDIR TO 67 MH MECH LAUNDRY DHOBI GHAT OF MILITARY HOSPITAL UNDER GE BELGAUM

S&F Pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers, with and including dismantling plain or corrugated roof sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed.

S&F Pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter, fixed with self tapping screws and washers, including dismantling plain or corrugated roof sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed.

M&L PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in foundation, filling and mass concrete etc., complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base of flooring, complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base of flooring, complete all as specified and as directed.

M&L for Hardcore of gauge not exc. 63mm, broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L for 80mm thick factory made machine pressed chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks lawns, drive away or light traffic etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting paver block as required size & pattern, finishing sweeping extra sand, complete all as specified and as directed by the Engineer-in-Charge.

M&L for Factory made Machine pressed pre-cast concrete interlocking paver block any shape and size with glossy finish on top, confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and no pigment, with and including 50mm thick river sand cushion under interlocking paver block with watering and consolidation, with and including demolition of existing floor tiles of any type, complete all as specified and as directed by the Engineer-in-Charge.

S&F Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle, channel, hollow sections or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B', complete all as specified and as directed.

S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165, with and including dismantling existing wrought iron or mild steel work of any description, complete all as specified and as directed.