REPAIR / REPLACEMENT OF EXTERNAL WATER PIPELINE, PUMP, MOTOR OF MES INSTALLATION CERTAIN UNIT UNDER GE KAMPTEE.

Amount

Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation / laying of pipes and getting out soft /loose soil complete all as specified and directed

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm soft /loose soil complete all as specified and directed

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point. complete all as specified and directed

Taking up or down GI tubing and fitting, 80 mm bore, from wall/ trenches and disconnecting from main distribution lines including necessary cutting of existing pipe line and threding the same and dewatering work as required and removing from site complete all as specified and directed.

All as per item No 04 above but 50 mm bore complete all as specified and directed.

All as per item No 04 above but 40 mm bore complete all as specified and directed.

All as per item No 04 above but 25 mm bore complete all as specified and directed.

All as per item No 04 above but 20 mm bore complete all as specified and directed.

All as per item No 04 above but 15 mm bore complete all as specified and directed.

Re-laying only in trenches trenches / fixing in wall GI tubing, 80 mm bore, medium grade with all fitting complete all as specified and directed.

All as per item No 10 above but 50 mm bore complete all as specified and directed.

All as per item No 10 above but 40 mm bore complete all as specified and directed.

All as per item No 10 above but 25 mm bore complete all as specified and directed.

All as per item No 10 above but 20 mm bore.

All as per item No 10 above but 15 mm bore.

Supply and laid in trenches GI tubing, 80 mm bore, medium grade with all fitting complete all as specified.

All as per item No 16 above but 50 mm bore complete all as specified and directed.

All as per item No 16 above but 40 mm bore complete all as specified and directed.

All as per item No 16 above but 25 mm bore complete all as specified and directed.

All as per item No 16 above but 20 mm bore complete all as specified and directed.

All as per item No 16 above but 15 mm bore complete all as specified and directed.

Material and labour for Cutting of cast iron pipe mains 200 mm bore for insertion of tees, collars, sluice valves, etc including dewatering work required for working water pipe lines complete all as specified and directed.

All as per item No 22 above but 150 mm bore complete all as specified and directed.

All as per item No 22 above but 100 mm bore complete all as specified and directed.

All as per item No 22 above but 80 mm bore complete all as specified and directed.

Material and labour for DI/CI fitting for spigot & socket end pipes such as Bends (any type, radius and angle), Tapers any type (Straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, `Y` junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs and mechanical joints etc upto 150 mm bore including removing/ dismantling of old CI fittings complete all as specified and directed.

Supply & Fix in repair cutting of MS pipe mechanical joint collor ,adopter ,socket type complete with jointing materials such as rubber gaskets, nut bolts, & washers but for the MS pipe of 300 mm bore including welding work complete all as specified and directed.

Supply & Fix in repair CI mechanical joint adapter type complete with jointing materials such as rubber gaskets, nut bolts, & washers but for the cast iron pipe of 200 mm bore complete all as specified and directed.

All as per item No 28 above but 150 mm bore complete all as specified and directed.

All as per item No 28 above but 100 mm bore complete all as specified and directed.

All as per item No 28 above but 80 mm bore complete all as specified and directed.

Material and labour for lead joint in repairs with lead pig, spun yarn for 200mm bore pipe complete all as specified and directed.

All as per item No 32 above but 150 mm bore complete all as specified and directed.

All as per item No 32 above but 100 mm bore complete all as specified and directed.

All as per item No 32 above but 80 mm bore complete all as specified and directed.

Taking out unserviceable CI sluice valve, 200 mm bore, double flanged from the existing pipe line by unscrewing nuts, bolts and removing of rubber gasket joints including de-watering work required for working pipe complete,refacing,regrinding and refixing all as specified and directed.

All as per item No 36 above but 150 mm bore complete all as specified and directed.

All as per item No 36 above but 100 mm bore complete all as specified and directed.

All as per item No 36 above but 80 mm bore complete all as specified and directed.

Material and labour Repacking stuffing box of sluice valve spindle including taking apart and reassembling 200 mm bore complete all as specified and directed.

All as per item No 40 above but 150 mm bore complete all as specified and directed.

All as per item No 40 above but 100 mm bore complete all as specified and directed.

All as per item No 40 above but 80 mm bore complete all as specified and directed.

Supply and fix sluice valve, 200 mm bore, flanged and drilled type PN-1.6, ISI marked with CI hand wheel and stainless steel spindleof IS:6603 bronze rings complete with jointing and jointing materials such as bolts, nuts, washers and rubber gaskets complete all as specified and directed.

All as per item No 44 above but 150 mm bore complete all as specified and directed.

All as per item No 44 above but 100 mm bore complete all as specified and directed.

All as per item No 44 above but 80 mm bore complete all as specified and directed

Supply and fix in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 50 mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

All as per item No 48 above but 40 mm bore complete all as specified and directed.

All as per item No 48 above but 25 mm bore complete all as specified and directed.

All as per item No 48 above but 20 mm bore complete all as specified and directed.

All as per item No 48 above but 15 mm bore complete all as specified and directed.

Supplying and laying in trenches MS pipe 300 mm bore, with flanged end, 300 mm bores complete all as specified and directed.

Taking out of centrifugal pump set 50HP pump house from pump foundation after disconnection from motor and transportation to workshop ,dismantling the pump for repair/ overhauling including cleaning of all parts of pump assembly throughly, including machine work of pump shaft inorder to obtain smooth finish including necessary polishing etc and installing back including helium gasket sheet not less than 1mm thick complete upto to the entire satisfaction of Engineer-in -charge complete all as specified and directed Note:- Spares parts as required shall be measure & paid seperately against the relevant items).

Supply and fix Casing Wear Ring complete all as specified and directed.

Supply and fix shaft sleeve complete all as specified and directed.

Supply and fix Inter Stage Ring complete all as specified and directed.

Supply and fix suitable Ball bearing DE complete all as specified and directed.

Supply and fix suitable Ball bearing NDE complete all as specified and directed.

Supply and fix suitable Bearing cartridge DE complete all as specified and directed.

Supply and fix shaft sleeve nuts complete all as specified and directed.

Supply and fix Split Gland complete all as specified and directed.

Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Vlots, 50 Cycles, and taking out to local workshop induction motor 50 HP for repair purpose including complete cleaning,rewinding with existing size copper windind wire,varnishing ,insulation and greasing and including shifting back to location as directed, installing, testing and commissioning after repair complete all as specified and directed. Note- Rewinding will be measure & paid seperately under relavant item of BOQ.

Material and labour for Rewinding the motor of capacity 50 HP with super enamelled copper winding wire with appropriate same gauge of existing coil with similar class of existing insulation as recommended by manufacturer with high quality nomenclature insulating paper applying best quality insulating varnish on stator / rotor windings drying them completely, testing the insulations complete all as specified and directed.

NOTE : SCHEDULE OF CREDIT (Amount on page No 38 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance on page No. 38 of tender documents [(-) Rs 21,550/- ].

NEELKAMAL BUILDERS

Paragon Electrotechnics

Bidder Name

Paragon Electrotechnics

chronicle enterprises

NEELKAMAL BUILDERS