Interior furnishing work of newly constructed Composite Office building

Amount

SH-I (Decorative Arts): Providing a 'Decorative Art Effect', using high density 19mm thick MDF board over a surface of 6 mm thick MDF board under 12 mm BWP ply, to be fixed over a frame work of Aluminium tube of 50mm x 25mm x 1.5mm thick in grid @ 600 mm c/c at all height, then apply with PU paint as required, cost includes all materials, scafolding, labour, lead, T&P etc. complete in all respect as per the detail working drawing and the direction of Engineer-in-charge/Architect.

Providing 'Decorative Art Effect' of traditional Sambalpuri design, using fabric, wrapped over 6 mm thick MDF board, to be fixed over a base of 12 mm thick BWP ply fixed on a frame work of Aluminium tube of 50mm x 25mm x 1.5mm thick in grid @ 600 mm c/c at all height, cost includes all materials, scafolding, labour, lead, T&P etc. complete in all respect as per the detail working drawing and the direction of Engineer-in-charge/Architect.

SH-II (False Ceiling) Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS: 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45x15x0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Raw plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter cahannels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing &

Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm long spaced between main 'T' at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross 'T' of length 600mm and size 24x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000 mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to

Providing and fixing 16 mm densified tegular edge non-woven polyester fiber acoustic ceiling tile of approved colour design of size 595x595mm in true horizontal level suspended on interlocking metal gride of hot dipped galvanized steel section (galvanized @120grams per sqm including both side) containing of main T runner suitable spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minimum) sheet, spaced 1200mm centre to centre, and cross "T" of size 24x28mm made I out of 0.33mm (Minimum) sheet, 1200mm long spaced between main 'T' at 600 mm centre to centre to form a grid of 1200x600 mm I and secondary cross 'T' of length 600mm and size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size 600x600mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size 24x24x3000 mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25 mm long dry wall screws @ 230mm interval and laying 16 mm thick densified tegular edge non-woven polyester fiber acoustic ceiling tiles of approved texture I in the grid, including, cutting/ making opening "for services like diffusers, grills, light fittings, fixtures, smoke dectectors etc., wherever required. Main 'T', runners to be suspended from ceiling using GI.

Extra for fixing in position Decorative False ceiling in made out of 12mm plywood with 4mm thick wood veneer ply with French spiri polish then finish with melamine polish etc., cost includes all materials, labour, lead, T&P etc. complete in all respect as per the detail working drawing and the direction of Engineer-in-charge/Architect.

SH-III (Partitions and Paneling): Providing and fixing in position 12mm thick WPC board with CNC cutting wall cladding over a frame work of Aluminium tube of 50mm x 25mm x 1.5mm thick in grid @ 600 mm c/c at all height. Then applying spray duco paint over WPC board to get smooth finish, cost includes all materials, scafolding, labour, lead, T&P etc. complete in all respect as per the detail working drawing and the direction of Engineer-in-charge/Architect.

Supplying and fixing single skin full height wall panelling (upto 3000 mm high) as per drawing and conforming to the following specification:

Supplying and fixing single skin above lintel wall panelling (upto 450/600mm height) as per drawing and conforming to the following specification:

Supplying and fixing single skin low height wall panelling (upto 1200 mm high) as per drawing and conforming to the following specification:

Extra providing and fixing 19mm thick BWP Block Board (confirming to IS: 710) and 6 mm BWP Ply over lintel with 1 mm thick lamination & edge finished with teak wood bearding etc., complete to provide pelmet & covering of air conditioner duct as per the detail working drawing and the direction of Engineer-in-charge/Architect.

Providing and fixing of 42mm thick wall panel using non-woven polyster fiber acoustic panels with Class A fire rating as per ASTM E 84. The G.I. Frame of Thickness 0.60mm consists of steel metal stud frame of size 50mm having one flange of 25mm & other of 25mm placed @ Every 600 mm c/c in vertical direction. These studs are placed at floor and ceiling channels 76mm width and 0.06 mm thick and having equal flanges of 25mm. The floor and ceiling channels are fixed to floor and soffit using fasteners at every 600mm c/c. A horizontal frame section is placed at every 1200mm c/c. Then ACOUSTIC POLYWOOL of thickness 25mm and density 20kg/m3 is fixed in between the studs. On outer side one layer of 8mm thick perferotated fire retardent calcium silicate board is fixed on the grid channels. Finally 10 mm thick polyster fiber acoustic wall panels are pasted on top using (using any acrylic adhesive such as fevicol SR998 or hot melt adhesive) of the board, cost includes all materials, labour, lead, T&P etc., complete in all respect as per the detail working drawing and the direction of Engineer-in-charge/Architect.

Supplying and fixing full height double skin partition (upto 3000 mm high) as per drawing and conforming to the following specification:

Supplying and fixing full height partly glaze partition (upto 3000 mm high) as per drawing and conforming to the following specification:

Supplying and fixing low height partly glaze partition (upto 1200 mm high) as per drawing and conforming to the following specification:

Providing and fixing of 15 mm thick high density wooden wall panel of AEROCEIL make or equivalent by means of basic Aluminium tube of size 50 mm x 25 mm x 1.5 mm thick /G.I stud sections frame work with a placement of members horizontaly and verticaly @ 600 mm c/c. High density panel of 2440x128x15 mm should be atteched to each other by tongue and groove method by virtue of acoustical vibrant cleat to be fixed on alluminium structure of size 3000mmx27mm & 6000 c/c flanges 18 mm having NRC flice at back side of the panels, creating NRC factor ranges from 0.63 to 0.98 depending upon the generation of sound. Panels should be fixed to the back framing structure by virtue of appropriate G.I clips / matel impaler all complete as per detail working drawing and the direction of Engineer-in-charge/Architect.

Extra for providing 3 mm thick aluminium composite panels (skin thickness 0.20mm), of approved shade, make and texture, pasted on plyboard surface with approved chemical adhesive in place of 1mm thick laminate sheet.

Extra for providing ribbed cladding made of exterior grade ribbed MDF Board with décor paper finish, of approved shade, make and texture, fixed over plyboard surface in place of 1mm thick laminate sheet.

Extra for providing 12mm thick approved quality soft board cladded with fabric of approved shade and quality in place of 1.0mm thick laminate sheet over BWP ply board in portion of the partition. Rate of fabric shall be approx Rs. 200.00 per mtr.

Providing and fixing on any surface, wall seasoned 1st class teak wood skirting/moulding/cornice 75 mm high and 12 mm thick including polishing and a coat of N.C lacquar satin finish.

SH-IV (Fix Furnitures and Storages): Providing work station as per as per drawing and conforming to the following specification: . Approx. size: 1600 x 600 x 750 mm

Providing and fixing in position free standing meeting tables as per drawing and conforming to be following specifications: Approx size: 7000 x 1500 x 750 mm

Approx size: 6000 x 1500 x 750 mm

Approx size: 4000 x 1200 x 750 mm

Providing and fixing in position, free - standing table as per drawing and conforming to the following specification: Basic structure of 19mm thick BWP grade block board (confirming to IS: 710) for sides, top and modesty panel, finished with 1.00 mm thick laminate sheet of approved shade and make including inner faces. The laminate on the front face of modesty panel 2400 x 900 x 750 mmshall be on an additional single layer of 4 mm BWP plyboard forming 4 x 4 mm groove pattern. Approx. size: 2400 x 900 x 750 mm

Approx. size: 2100 x 900 x 750 mm

Approx. size: 2100 x 750 x 750 mm

Extra for providing & fixing 12 mm thick high density MDF board on ply board surface in place of 1 mm thick laminate sheet & applying PU paint of approved shade & texture as per the detail working drawing and the direction of Engineer-in-charge/Architect.

Extra for providing & fixing 12 mm thick BWP ply (confirming to IS: 710) as in where required to make the surface lavel etc. complete as per the detail working drawing and the direction of Engineer-in-charge/Architect.

Extra for provision of 18 mm thick granite, duly polished, fixed on block board surface with appropriate chemical adhesive complete with edge moulding as per design/instruction. The shade and texture of granite shall be as approved and the basic rate to be considered as approx Rs. 2000.00 per sqm.

Providing and fixing low height storage unit/file cabinet of size 450 mm depth x 750/725 mm high & length as per the site condition. The cabinet comprises of shelves, drawers & shutters made out of 19 mm thick BWP grade block board (confirming to IS: 710) and edges to be provided teak wood lipping. The rear face of unit shall be of 12 mm thick WPC board of approved make. Exposed block board surfaces shall be finished with 1 mm thick laminate sheet of approved shade & make. Inner faces shall be provided 0.8mm thick balanacing laminate sheet. Free edges of block board shall have polished with teak wood bearding of size: 40x20 mm section.

Providing and fixing full height storage unit/file cabinet of size 450 mm depth x 2100 mm high & length as per the site condition. The cabinet comprises of shelves, drawers & shutters made out of 19 mm thick BWP grade block board (confirming to IS: 710) and edges to be provided teak wood lipping. The rear face of unit shall be of 12 mm thick WPC board of approved make. Exposed block board surfaces shall be finished with 1 mm thick laminate sheet of approved shade & make. Inner faces shall be provided 0.8mm thick balanacing laminate sheet. Free edges of block board shall have polished with teak wood bearding of size: 40x20 mm section.

Extra for providing superior quality laminate in palce of standard quality laminate. Payment will be made on the area of metal foil laminate.

Extra for providing 4mm BWP Ply as per drawing design Payment will be made on the area of ply

Extra for providing 0.8mm Stainless steel metal laminate in palce of standard quality laminate. Payment will be made on the area of metal foil laminate.

SH-V (Loose Furnitures): Chairs for Executive chambers Providing and supplying of approved chairs, with the following specifications and with approved quality & brand. High back chairs. Make: ISIT Y-MESH or equivalent.

High back chairs. Make: Godrej Marvel (Leatherette) High Back or equivalent.

Mid back chairs. Make: ISIT Y-MESH Medium back or equivalent.

Visitor chairs. Make: Godrej Marvel (Leatherette) Visitor or equivalent

Visitor chairs. Make: ISIT -LUXY or equivalent

Chairs for Conference Hall. The Cushioned seat assembly consists of seat outer (material-30% Glass Fiber Nylon) & upholstered Seat inner (material-Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back is made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material-PP) with seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 3.75±0.1 cm. High back chairs. Make: ISIT Y-MESH High back or equivalent.

Mid back chairs. Make: ISIT Y-MESH Mid back or equivalent.

Providing and supplying of approved chairs, with the following specifications and with approved fabric. (Note: Adhesive to be used for fixing (wherever applicable), Varnish < 350 g/l and Lacquer < 550 g/l to be used. VOC limit for any coating < 50 g/l, polypropylene to be 80% recycle, MSDS for the same to be submitted prior to use.) Work Station chairs Make :- ISIT BOOM

3 module ss Waiting chair

SH-VI (Door and Windows) Providing and fixing 1 mm thick laminate sheet of approved shade & quality on both sides of the existing door shutter and making necessary opening for vision panel with fixing of 12mm thick glass of required size with all around teak wood beading. Cost includes all materials, labour, lead, T&P etc. complete in all respect as per the detail working drawing and the direction of Engineer-in-charge/Architect.

Providing and fixing of following materials of approved make and quality to door shutter. Décorative door handle

Floor spring

Hydraulic door closer

SH-VII (Painting) Providing and applying white cement based putty of average thickness of 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Providing and applying minimum two coats of Acrylic modified resin based texture of approved shade and make on a base coat of necessary primer including necessary surface preparation.

SH-VIII (Miscellaneous): Providing and fixing in position the Vertical Blinds of approved shade and design alongwith the required accessories of Vista levelor/MAC or equivalent as per drawing & direction of Engineer-in-charge/Architect.

Providing and fixing Blackout Roller Blinds of Hunter Douglas/Marvel/Vista or equivalent make with supporting frame work etc. of approved make, shade and colour complete in working order as per manufacture specification& direction of Engineer-in-charge/Architect.

Providing and fixing in position the Roman Blinds of approved shade and design alongwith the required accessories as per drawing & direction of Engineer-in-charge/Architect.

Providing and fixing Signage / Logo made out of 6mm thk. Acrylic sheet of size 400x400 mm as shown in the drawing & direction of Engineer-in-charge/Architect.

Providing and laying 5 mm thick SPC (Stone Polymer Composite) flooring including all profile and skirting as per approved sample etc complete as per manufacture specification& direction of Engineer-in-charge/Architect.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Supplying fitings and fixing in position wallpaper of appproved make and pattern to the iternal surface oa wall including cost,conveyance ,loading,uploading of all material,cost of all labour sundries and T&P etc required for the work eyc complete as per specification and direction of Engineer-in-Charge/Archirect

Extra for providing 4/6 mm thick chercoal sheet of approved make in place of standard quality laminate as per the drawing & design.

Suppling & instalation of Powder coated S.S letter and logo of required size etc complete as approved drawing and design

ELECTRICAL SH-IX (WIRING) Wiring for power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make-HAVELS/FINOLEX or equivalent

Wiring for power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 1.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make-HAVELS/FINOLEX or equivalent

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos 3 pin 5/6 amps modular socket outlet and 2nos 5/6 amps modular switch, connection etc on same board for Computer point. as required. (For light plugs to be used in non residential buildings).Make-HAVELS/ROMA/ANCHOR or equivalent

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing RJ-45 modular LAN socket, connection etc. as required.Make-HAVELS/ROMA/ANCHOR or equivalent

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall / floor and making good the same in case of recessed conduit as required.Make-FINOLEX/SUDHAKAR or equivalent. 20 mm

SH-X (FITTINGS & FIXTURES) Supplying and fixing of energy efficient recess mounted Ultra slim LED panel made from extruded aluminium housing frame luminaire of 600 x 600 mm size with power rating not more than 36 W and lumen output not less than 4000 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required. (Similar to Jaquar model no. LSVR01S036XN or similar make of PHILIPS / JAQUAR / WIPRO)

Supplying and fixing of energy efficient Deep recess mounted, COB based swivel LED downlight with 38 degree beam angle with power rating not more than 12 W and lumen output not less than 4000 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required. (Similar to Jaquar model no. LERS03S012XN or similar make ofPHILIPS / JAQUAR / WIPRO/CROMPTON GRAEAVES/HAVELS)

Supplying and fixing of energy efficient LED surface mounted square panel with aluminium die cast housing with power rating not more than 18 W and lumen output not less than 4000 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required. (Similar to Jaquar model no. LNRO02S018SN or similar make of PHILIPS / JAQUAR / WIPRO/CROMPTON GRAEAVES/HAVELS)

S.I.T.C of Energia 1200 mm sweep BEE single star rating ceiling fan i/c wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm FR PVC insulated copper conductor single core cable etc. as required. (Make of USHA / ORIENT / CG / BAJAJ)

Supplying and fixing of energy efficient LED indoor type Stip Light mounted with power rating not more than 25 W and lumen output not less than 3000 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required. (Similar to Jaquar model no. LSTP03X005XW or similar make of PHILIPS / JAQUAR / WIPRO)

SH-XI (AIRCONDITIONER) Supplying, installation, testing commissioning of 2 TR Split type Airconditioner with rotary compressor and R410a Refrigerent having wall mounted type indoor unit and wall/ Floor mountable outdoor unit and for lifting the units up to the terrace / sun set level for installation i/c Factory Fabricated Bracket with powder coated paint, making hole or cutting the wall and making good the damages etc complete as required. (Make : Hitachi / Mitsubishi /O-General /LG/VOLTAS) 2 TR

Supplying Of Refrigerant copper pipe line of following dia for necessary connection from outdoor condenser unit to indoor cooling & fixing the same on wall surface with clamp i/c nitrile rubber insulation etc as required. 5/8" dia and 3/8" dia

Supplying and fixing 3 core 2.5 sq.mm (Stranded) PVC insulated and PVC sheathed flexible, 1.1kV. ISI Marked copper cable for connection of split type A.C unit from indoor cooling unit to outdoor condenser unit with necessary connection. Checking and testing etc. as required.Make-HAVELS/FINOLEX or equivalent

Supplying and fixing of 16 Amps. 3 Pin plug Top & connection the same at one end of indoor cooling unit etc complete as required.

Supply and fixing of 25 mm dia UPVC pipe for accumulated water from the cooling coil of the Split type Air Conditioner unit to outside of the building with 9 mm thick nitrile rubber tube for insulating the UPVC pipe above and inside the false ceiling with proper hanging / suspending arrangement and maintaining proper slope for smooth passing of drain water with necessary accessories i/c taping etc. complete as required maintaining the aesthetic view of the building.

INFORMATION TECHNOLOGY MANAGEMENT: SH-I (CCTV) Supply, Installation, Testing & Commissioning of 4MP resolution, IP IR Dome with PoE, H.265/H.264 Codec 1/2.7” CMOS Shutter Speed of 1/25s ~ 1/ 100,000s, 2.8mm Fixed Lens 3DNR,30 Mtr IR, Built-in Mic, BLC, HLC, DWDR Privacy Masking and ROI support Metal housing, IP67, ONVIF Profile S, G, Certificates - CE, FCC, RoHS, BIS etc. complete as required. Make- Honeywell / AXIS / PELCO

Supply, Installation, Testing & Commissioning of 4MP resolution, IP IR Bullet with PoE, H.265/H.264 Codec 1/2.7” CMOS Shutter Speed of 1/25s ~ 1/ 100,000s 3.6mm Fixed lens 30 Mtr IR, 3DNR, BLC, HLC, DWDR Privacy Masking and ROI support Metal housing, IP67, ONVIF Profile S, G; Certificates - CE, FCC, RoHS, BIS etc. complete as required. Make- Honeywell / AXIS / PELCO

Supply, Installation, Testing & Commissioning of 4MP resolution, IP IR Verifocal Bullet with PoE, H.265/H.264 Codec 1/2.7” CMOS Shutter Speed of 1/25s ~ 1/ 100,000s 2.8 ~ 12mm MFZ Lens Variant, 50 Mtr IR, 3DNR, BLC, HLC, DWDR Privacy Masking and ROI support Metal housing, IP67, ONVIF Profile S, G, Certificates - CE, FCC, RoHS, BIS etc. complete as required. Make- Honeywell / AXIS / PELCO

Supply, Installation, Testing & Commissioning of Dome PTZ 4 MP resolution;30X Optical Zoom, H.265 Codec; 1/3” CMOS ;Shutter Speed of 1/1s ~ 1/ 30,000s; 4.5 ~ 135mm MFZ Lens Variant; 3DNR;BLC;HLC;WDR 120 dB;100 Mtr IR,Analytics - Face Detection, Auto Tracking; Aluminium housing;SD Card Slots 128 GB;Alarm & Audio IN/OUT; IP66; ONVIF Profile S & G, Certificates- CE, FCC, RoHS, BIS,UL including power supply and mounting breaket etc. complete as required. Make- Honeywell / AXIS / PELCO

Supply, Installation, Testing & commissioning of 64ch Quad Core Embedded Linux;4 SATA up to 32TB inbuilt storage,3 x USB, RS232,eSATA Port,Mamimum 100 user;Audio In/Out,2 x HDMI , 1 VGA;Network throughput 320 Mbps In/Out,Certificates -CE,FCC,RoHS,BIS,UL etc. complete as required. Make- Honeywell / AXIS / PELCO

Supplying, Installation, Testing and commissioning of client workstation with Intel i5, 16GB RAM, 1TB HDD, Windows OS, 10/100/1000 Ports, HDMI, USB, complete etc. as required. Make- HP / LENEVO / DELL

Supplying, Installation, Testing and commissioning of Size-65",Panel Technology-IPS,Resolution:3,840 x 2,160 (ULTRA HD),brightness:400cd/m2,Dynamic Contrast Ratio -1000000:1,Web OS 6.0, Interfaces: HDMI-3 or more, DP, DVI-D, Audio, USB, external control-RS232C, RJ45, IR Receiver, Pixel Sensor, Built in WiFi. Built in Quad Core system [SOC], Temperature Sensor, Auto Brightness Sensor, 15x15 or more Tile Mode, USB Cloning, Content Scheduling , Sync mode, PM mode, Fail Over, Wake on LAN, Embedded Template, Industrial grade Certification- CU, CB , TR, KC , CE, etc. as required. Make-NEC/LG/BARCO

Supply, Installation, Testing, Commissioning of 8 TB Special Surveillance Hard Disk etc. as required. Make- WD/SEAGATE/HITACHI

SH-II (ACTIVE & PASSIVE NETWORKING FOR LAN+CCTV+Wi-Fi) Supply , Installation, testing , commissioning of HW Appliance with 8 GE + 2 SFP + 2 SFP+ ports, 1 expansion bay for optional Flexi Port module, SSD + Base License (incl. FW, VPN & Wireless) for unlimited users + power cable including Base License Networking, Wireless, Xstream Architecture, Unlimited Remote Access VPN, Site-to-Site VPN, reporting Network Protection Xstream TLS and DPI engine, IPS, ATP, Security Heartbeat, SD-RED VPN, reporting Web Protection Xstream TLS and DPI engine, Web Security and Control, Application Control, reporting Zero-Day Protection Machine Learning and Sandboxing File Analysis, reporting Enhanced Support 24/7 support, feature updates, advanced replacement hardware warranty for 3 yeras etc. as required. Make- Checkpoint / Fortinate / Sophos

Supply , Installation, testing , commissioning of 20-Port 10/100/1000Base-T Ports + 4 Combo 10/100/1000Base-T/SFP Ports + 4 10GE SFP+ Ports L3 Stackable Managed Switch.Switch should Support Internal/External Redundant Power Supply, switch fabric with Min. 128 Gbps Back plane & 95 million pps wire speed. should support 68K Mac address, IPv4 Routing Table 16K entries, IPv4 Forwarding Table 32K entries, Jumbo Frame Size-10K,Ventilation 2 x smart fans,Surge Protection 6 kV surge protection on all Ethernet access ports, IPv6 Ready Certification IPv6 Ready Logo Phase-2, 256 IP interfaces, Support VRRP v2/v3, 512 IPv4 entries & 256 IPv6 entries, Switch shoudl support BGP, BGPv4/v4+, Text/MD5 for BGPv4, VRF-Lite, RIPv1/v2 OSPFv2, BGPv4, Bidirectional Forwarding Detection (BFD) for OSPF, OSPF, OSPF v2/v3, OSPF equal cost route, Text/MD5 for OSPFv2, Swich should support 8 queues per port, Queue Handling, Strict Priority (SP), Weighted Round Robin (WRR), Strict + WRR, Weighted Deficit Round Robin (WDRR). Congestion Control, Weighted Random Early Detection (WRED), 802.1Qbb Priority-based Flow Control (PFC) for 10 GbE. CoS based on Switch port, Inner/outer 802.1p Priority, Inner/outer VID, MAC address, Ether Type, IP address, ToS/IP Preference, DSCP, Protocol type, TCP/UDP port, IPv6 Traffic Class, IPv6 Flow Label. ACL based on: 802.1p priority, VID, MAC address, Ether Type, LLC, VLAN, IP address, IP preference/ToS.Console port for Out of band CLI mangement (console cable should be included). etc. as required. Make- Cisco / Juniper / D-Link

Supply , Installation, testing , commissioning of 24-Ports 10/100/1000Mbps + 4-Ports 10G SFP+ Layer-2 Managed Switch. Switching Capacity should be atleast 128Gbps, Packet Forwarding Rate should be atleast 95Mpps, MAC Address Table size: Atleast 16000, support atleast 256 static MAC. Flow Control: IEEE 802.3x in full duplex, back pressure in half duplex & HoL blocking prevention. Jumbo Frame Support 12K bytes. IGMP v1 v2 snooping with atleast 256 IGMP snooping groups, Per VLAN IGMP Snooping, host based IGMP snooping fast leave. IEEE802.1D STP, 802.1w RSTP,802.1s MSTP, Root guard or equivalent feature, IEEE 802.3ad Link Aggregation with atleast 8 ports per groups & 8 groups per switch.Port mirroring for Tx/Rx/Both. One-to-One mode, Many-to-one mode. IEEE 802.1Q VLAN, atleast 4094 Static VLANs, Voice-VLAN. Should have 802.1p support with 8 queues per port. Support strict & WRR queue handling technique. The switch should have support for standard & extended Access control lists. Switch should have feature to protect the CPU from protocol control packet attack. Switch should have following Management features from day-1: Web-based GUI, Web based GUI for IPv6, Physical console port for Out of band CLI management, Telnet Server, Telnet Server IPv6, TFTP Client, TFTP client IPv6, SNMPv1v2cv3, SNMP IPv6, SNMP trap, BootP/DHCP Client,SNTP, trusted host, trusted host IPv6, RMONv1, Syslog, Syslog IPv6. Switch should have Energy saving green technology based on cable length & link status. IEEE 802.3az. switches & transceivers should be from same make etc. as required. Make- Cisco / Juniper / D-Link

Supply , Installation, testing , commissioning of 24-Ports 10/100/1000Mbps PoE + 4-Ports Combo GE/SFP Smart Managed Switch, 370Watts. Switch shall have Non-blocking wire speed switch fabric. Switch shall have Min. 56 Gbps Back plane or higher. Switch shall have Min 41 million pps or higher . Switch shall support Min. 8 K Mac address. Switch Should support Jumbo Frame (9k Bytes). Switch Should Support PoE Capable Port 1 to 24. Switch Should Support PoE power Budget of 370W. Switch should have IGMP Snooping v1,v2 & IGMP v3 awareness. Switch should have Spanning tree 802.1D STP, 802.1W RSTP & 802.1s MSTP. Switch should have 802.3ad Link Aggregation Up to 8 groups/8 ports per group. Switch should have Port Mirroring One to one/Many to One. Switch should support 4 nos IP interface. Switch should support 124 nos IPv4 static route & 50 nos IPv6 static route. The LAN switch shall have IEEE 802.1Q VLAN encapsulation. Up to 255 VLANs per switch. It shall have Auto Surveillance VLAN, Asymmetric Vlan & Auto Voice Vlan. It shall support 802.1p Priority Queues ( 8 queues per port ). Queue Handling mode: WRR & Strict Mode, Class of service shall be based on DSCP,802.1p queues,IPv6 Traffic class. The LAN switch shall support IEEE 802.1x to allow dynamic, port-based security, providing user authentication. It shall support DHCP Server Screening. It shall support Network Timing Protocol (NTP/SNTP) to provide an accurate and consistent timestamp to all intranet switches.It should support Compact CLI through Telnet, SNMPv1/V2c and V3, LLDP, LLDP-MED . Switch should be CE,FCC,UL,VCCI, certified. Switch should be IPv6 ready from day one etc. as required. Make- Cisco / Juniper / D-Link

Supply , Installation, testing , commissioning of8-Ports 10/100/1000Mbps PoE + 2-Ports SFP 100/1000Mbps Smart Managed Switch, 65Watts. Switch shall have Non-blocking wire speed switch fabric. Switch shall have Min. 20 Gbps Back plane or higher. Switch shall have Min 14 million pps or higher . Switch shall support Min. 8 K Mac address. Switch Should support Jumbo Frame (9k Bytes). Switch Should Support PoE Capable Port 1 to 8. Switch Should Support PoE power Budget of 65W. Switch should have IGMP Snooping v1,v2 & IGMP v3 awareness. Switch should have Spanning tree 802.1D STP, 802.1W RSTP & 802.1s MSTP. Switch should have 802.3ad Link Aggregation Up to 8 groups/8 ports per group. Switch should have Port Mirroring One to one/Many to One. Switch should support 4 nos IP interface. Switch should support 124 nos IPv4 static route & 50 nos IPv6 static route. The LAN switch shall have IEEE 802.1Q VLAN encapsulation. Up to 255 VLANs per switch. It shall have Auto Surveillance VLAN, Asymmetric Vlan & Auto Voice Vlan. It shall support 802.1p Priority Queues ( 8 queues per port ). Queue Handling mode: WRR & Strict Mode, Class of service shall be based on DSCP,802.1p queues,IPv6 Traffic class. The LAN switch shall support IEEE 802.1x to allow dynamic, port-based security, providing user authentication. It shall support DHCP Server Screening. It shall support Network Timing Protocol (NTP/SNTP) to provide an accurate and consistent timestamp to all intranet switches.It should support Compact CLI through Telnet, SNMPv1/V2c and V3, LLDP, LLDP-MED . Switch should be CE,FCC,UL,VCCI, certified. Switch should be IPv6 ready from day one etc. as required. Make- Cisco / Juniper / D-Link

Supply , Installation, testing , commissioning of 1000Base-LX Single-Mode, 10KM SFP Transceiver Module etc. as required. Make- Cisco / Juniper / D-Link

Supply , Installation, testing , commissioning of AC1300 Dual Band Indoor Ceiling Mount Wave2 PoE Wireless Access Point. Wireless Features:- Standards: IEEE 802.11a,b,g,n & ac wave 2, Data rate: Min. 400Mbps @ 2.4GHz & 867Mbps @ 5GHz, Allows auto fallback data rate for reliability, optimized throughput and transmission range. Radio Output Power: Min. 23dBm @ 2.4GHz radio, Min. 23dBm @ 5GHz radio. Antenna Gain: Min. 3dBi dual gain internal omni-directional antenna (min.2nos.). Multiple Mode Support: Access Point, Wireless Distribution System, Wireless Distribution System with Access Point & Wireless Client mode. WMM, Band Steering, Min.8 SSID, Wireless Scheduling, Bandwidth Control (Uplink & Downlink), Load Balancing. Physical Interface:- 1no. 10/100/1000BaseT IEEE 802.3af PoE, IEEE 802.3u & IEEE 802.3ab, Energy-Efficient Ethernet (IEEE 802.3az), VLAN. Security Features:- WEP (64bit & 128bit encryption), WPA (Personal & Enterprise), WPA2 (Personal & Enterprise), Wireless MAC ACL, 802.1x, internal RADIUS server, SSL, SSH, Captive Portal authentication, Wireless Intrusion protection, ARP spoofing prevention, Configurable client connection limit. Management Features:- Web based configuration & management, Telnet, SNMPv1v2cv3, NTP, DHCP server. Physical Parameters:- Power Suply (External Power Adapter & IEEE 802.3af PoE), Power Consumption: < 15Watt, Ceiling & Wall Mounting Options. Should be compatible with centralized on-premises or private cloud based management solution. etc. as required. Make- Cisco / Juniper / D-Link

Supply , Installation, testing , commissioning of Wireless Hardware Controller or hub . Controller should support 1 Nos Gigabit LAN Port, 1 Nos USB 3.0, 1 Nos MicroSD Slot & 1 Nos of RJ45 Console Port From day One. Device Must Support, Discover, manage, configure, and monitor up to 100 APs per controller.Controller should support Powerful management, monitoring, and troubleshooting functionalities.controller should support web access through (HTTPS), SSH, and Telnet. Controller Must support the security fearure like WPA2/WPA3, 802.1x1 and RADIUS Server, POP3, LDAP. etc. as required. Make- Cisco / Juniper / D-Link

Supply and Laying of 6 Core 9/125um Single Mode Optcal Fiber Outdoor CST Armoured Unitube HDPE Sheath in the existing surface/ recessed steel/ PVC conduit as required. Make- Legrand / Commscope / D-Link

Supply , Installation, testing , commissioning of 12-Port Rack Mount LIU Loaded with SC SM Adapter and pigtel including splicing etc. as required. Make- Legrand / Commscope / D-Link

Supply , Installation, testing , commissioning of SC-LC SM Optical Fiber Duplex Patch Cord Length-3Mtr etc. as required. Make- Legrand / Commscope / D-Link

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. Make- Legrand / Commscope / D-Link CAT6 UTP 23AWG Copper Cable (Blue Colour ) for Data

CAT6 UTP 23AWG Copper Cable (Orange Colour) for CCTV

CAT6 UTP 23AWG Copper Cable (Yellow Colour) for Wi-Fi AP

CAT6 UTP 23AWG Copper Cable 305Mtr Roll Outdoor for Outside Camera

Supply , Installation, testing , commissioning of CAT6 UTP Copper Patch Panel - 24 Port Loaded with Coloured Keystone Jack etc. as required. Make- Legrand / Commscope / D-Link

Supply, Installation, Testing and Commissioning of following size of UTP Cat6 Patch Cord etc complete as required. Make- Legrand / Commscope / D-Link CAT6 UTP Copper Patch Cord Length-0.5Mtr (Required Coloured)

CAT6 UTP Copper Patch Cord Length-2Mtr (Required Coloured)

Supply , Installation, testing , commissioning of Dual Information Outlet having one side CAT6 UTP Keystone Jack & other side CAT5e Keystone Jack with Surface Mount Box (SMB) etc. as required. Make- Legrand / Commscope / D-Link

Supply, Installation, Testing and Commissioning of following size networking rack made of MS sheet having front glass door, mounting hardware, cooling fan, PDU etc complete as required. Make- Netrack / APW / D-Link 12U 450mmD Wall Mount Rack with Accessories (FAN, PDU, Cable Manager & Screw Packet)

9U 450mmD Wall Mount Rack with Accessories (FAN, PDU, Cable Manager & Screw Packet)

36U 800mmD*1000mmD Floor Standing Server/Network Rack with standard Accessories

SH-III ( Audio and Video conferencing systems ) Supply, Installation, Testing and Commissioning of Video Conferencing system for IP and 3rd party video calls support from day one - 4k Codec-Wireless Presentation System, 12x PTZ camera, IP Mic 2nos., remote, NTSC/PAL; Cables: 2 HDMI 1.8m, 1 CAT 5E LAN 3.6m, 1 CAT 5E SHLD 25ft, 1 HDCI 6ft, 1 HDCI Mini 3m, Power: India BIS. including Partner Premier, three Year, Native support for cloud video platforms like Zoom, StarLeaf and GoToRoom means no room PC or Mac is required, Camera switching via touch interface complete etc. Make - Polycom or Equivalent

Supply, Installation, Testing and Commissioning of Size-86",Panel Technology-IPS,Resolution:3,840 x 2,160 (ULTRA HD),brightness:500nits,Dynamic Contrast Ratio -1000000:1, Interfaces: HDMI-3 or more, DP, DVI-D, Audio, USB 2.0, external control-RS232C, RJ45, IR Receiver, Pixel Sensor, Built in WiFi. Built in Quad Core system [SOC] with internam memory 8GB or higher, Web OS, Temperature Sensor, Auto Brightness Sensor, 15x15 or more Tile Mode, USB Cloning, Content Scheduling , Sync mode, PM mode, Fail Over, Wake on LAN, Embedded Template,, Industrial grade Certification- NTRL / CB / KC , FCC (A) / CE / KC complete etc. as required. Make-NEC/LG/BARCO

Supply, Installation, Testing and Commissioning of POP-UP Box complete etc. as required

Supply, Installation, Testing and Commissioning of Analogue Conference Chairman Unit etc complete as required. Make - Ahuja / Bosch / JBL

Supply, Installation, Testing and Commissioning of Analogue Conference Delegate Unit etc complete as required. Make - Ahuja / Bosch / JBL

Supply, Installation, Testing and Commissioning of Central Mixer Amplifier with Conference Expansion Unit etc complete as required. Make - Ahuja / Bosch / JBL

Supply, Installation, Testing and Commissioning of Special Conference ( 10 Mtr Roll ) Cable & Connector etc complete as required. Make - Ahuja / Bosch / JBL

Supply, Installation, Testing and Commissioning of Special Conference ( 5 Mtr Roll ) Cable & Connector etc complete as required. Make - Ahuja / Bosch / JBL

Supply, Installation, Testing and Commissioning of 30 W RMS 2 WAY PA Ceiling Speakers etc complete as required. Make - Ahuja / Bosch / JBL

Supply, Installation, Testing and Commissioning of 250 Watt Mixer Amplifier etc complete as required. Make - Ahuja / Bosch / JBL

Supply, Installation, Testing and Commissioning of 12U Rack for Controller & Amplifier etc complete as required. Make- Netrack / APW / D-Link

Supply and Laying of 23/36 flat 2 core Loudspeaker Cable in the existing surface/ recessed steel/ PVC conduit as required. Make - Finolex / Falcan / D-Link

Supplying, Installation, Testing and commissioning of Size-65",Panel Technology-IPS,Resolution:3,840 x 2,160 (ULTRA HD),brightness:400cd/m2,Dynamic Contrast Ratio -1000000:1,Web OS 6.0, Interfaces: HDMI-3 or more, DP, DVI-D, Audio, USB, external control-RS232C, RJ45, IR Receiver, Pixel Sensor, Built in WiFi. Built in Quad Core system [SOC], Temperature Sensor, Auto Brightness Sensor, 15x15 or more Tile Mode, USB Cloning, Content Scheduling , Sync mode, PM mode, Fail Over, Wake on LAN, Embedded Template, Industrial grade Certification- CU, CB , TR, KC , CE, etc. as required. Make-NEC/LG/BARCO

Supply, Installation, Testing and Commissioning of HDMI 2.0 Matrix 8x8 matrix switcher etc complete as required. Make- Primesol / Kramer /Aten

Supply, Installation, Testing and Commissioning of High speed HDMI Cable (15 Mtr ) etc complete as required. Make - Honeywell / Belkine / Kramer

Supply, Installation, Testing and Commissioning of Custom TV Cart floor mount etc complete as required

Supply, Installation, Testing and Commissioning of UHF dual channel high performance wireless microphone etc complete as required. Make - Ahuja / Bosch / JBL

SH-IV (EPABX and Telephones) Supply, Installation, Testing and Commissioning of 19" Rack Mountable VoIP ready EPABX System with CPU and Power card and initially equipped with 16 P&T Trunk Ports, 24 Digital extensions Ports, 140 Analog extensions ports and 10 IP User Lic., 16 voice mail port, expandable up-to 240 Ports (Analog / Digital and CO) in same cabinet with caller identification on all extensions, PRI support, including required number of cards hardware and software for providing 100% non-blocking, unified communication complied, Q-Sig complied, Built in LCR, CTI ready, remote maintenance, E1 complied, basic software with all necessary hardware etc complete as required. Make- Matrix / NEC / Avaya

Supply, Installation, Testing and Commissioning of Digital Handset with 16 DSS Keys etc complete as required. Make- Matrix / NEC / Avaya

Supply, Installation, Testing and Commissioning of IP Handset with 06 DSS Keys etc complete as required. Make- Matrix / NEC / Avaya

Supply, Installation, Testing and Commissioning of Basic CLI analog handset etc complete as required. Make- Beetel / Panasonic /BPL

Supply, Installation, Testing and Commissioning of 200 Pair DP Box with Krone Module etc complete as required.

Supply, Installation, Testing and Commissioning of 50 Pair DP Box with Krone Module etc complete as required.

Supply and Laying of .5mm 20 pair PVC Telephone Cable in the existing surface/ recessed steel/ PVC conduit as required. Make - Finolex / Polycab / Legrand

Supply and Laying of 2pair 0.5mm PVC telephone cable in the existing surface/ recessed steel/ PVC conduit as required. Make - Finolex / Polycab / Legrand

SH-V (Online UPS and Battery) Supply, Installation, Testing and Commissioning of 40KVA on line UPS System with IGBT based rectifier and Inverter, >0.99 input power factor, 0.9 output design power factor, up to 95% overall efficiency, Battery charger capacity 6KW, 228VAC to 478 VAC input window, 3 phase input & output having both Rack and floor mountable option, LCD display, 125% for 5 min. and 150% for one minute Overlod capacity, 58 dBA audible noise, input / output & bypass circuit breaker, integrated manual bypass. Each UPS System should have inbuilt static & Maintenance bypass switch and Battery breaker in UPS to Battery path, suitable to operate upto 2000 mtr altitude including battery rack and interlinks etc complete as required. Make- Liebert (Vertiv ) / GE / Mitsubish.

Supply, Installation, Testing and Commissioning of SMF Battery bank 38 nos. 12V 65AH or minimum 29640 VAHfor 30 minutes back up etc complete as required. Make - Amararaja ( Quanta) / Exide

K N MISHRA CONSTRUCTIONS (INDIA) PVT LTD