GE 874/EWS-20/2021-22

Amount

E/M Portion

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for laying of pipes as in hard /dense soil and getting out, complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point.

Taking up cast iron water mains bore of pipe 150 mm (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead.

Taking up cast iron water mains bore of pipe 100 mm (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead.

Taking up cast iron water mains bore of pipe 80 mm (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead.

Supply and laying Cast iron pipes with spigot and sockets ends centrifugally cast, Class LA in 150 mm size laid in treanches.

Supply and laying Cast iron pipes with spigot and sockets ends centrifugally cast, Class LA in 100 mm size laid in treanches.

Supply and laying Cast iron pipes with spigot and sockets ends centrifugally cast, Class LA in 80 mm size laid in trenches.

Supply & fixing bends (any Type radius and angle tapers any type (striaght, bend, increasing decreasing or double sockets etc ) Tee pieces single branch 'Y' Junction, double branch, cross (all sockets or sockets and spigot) collars caps and plugs upto 150mm bore.

Run lead joint for CI pipe spigot and socket pipes and fittings of 80 mm bore complete all as specified and directed by Engineer-in-Charge.

Run lead joint for CI pipe spigot and socket pipes and fittings of 100 mm bore complete all as specified and directed by Engineer-in-Charge.

Run lead joint for CI pipe spigot and socket pipes and fittings of 150 mm bore complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store for credit complete with all fittings & valves etc complete all as specified and directed.

All as per description of ser item No.14 above but 20mm.

All as per description of ser item No-14 above but 25mm.

All as per description of ser item No-14 above but 40mm.

All as per description of ser item No-14 above but 50mm.

All as per description of ser item No- 14 above but 80mm.

All as per description of ser item No-14 above but 100mm.

Supply and Fixing GI water tubing 15mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engineer-in-Charge.

All as per description of ser item No.21 above but 20mm.

All as per description of ser item No-21 above but 25mm.

All as per description of ser item No-21 above but 40mm.

All as per description of ser item No-21 above but 50mm.

All as per description of ser item No-21 above but 80mm.

All as per description of ser item No-21 above but 100mm.

Fixing only water tubes, any grade (GI/ PPR), laid in trenches, 15 to 20 mm bore, as retrieved from taking down here in before with connections to all fittings (fittings like socket, union, elbow, bend, tees etc shall be measured and paid seperately under respective items as supplied only) jointed and laid in trenches complete all as specified and as directed by Engineer-in-Charge.

All as per description of ser item No-28 above but 25 to 40 mm.

All as per description of ser item No-28 above but 50 to 80mm.

All as per description of ser item No-28 above but 100mm.

Supply only of GI Water Tubing 15 mm bore 'Medium Grade', Galvanized, with one socket at one end of the pipe (of 6 meters length or whatever lesser length the pipe is supplied in).

All as per description of ser item No-32 above but 20mm.

All as per description of ser item No-32 above but 25mm.

All as per description of ser item No-32 above but 40mm.

All as per description of ser item No-32 above but 50mm.

All as per description of ser item No-32 above but 80mm.

All as per description of ser item No-32 above but 100mm.

Fixing only of globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 15 to 40 mm (material as supply only shall be measured and paid seperetely under respective only) complete all as specified and directed by Engineer-in-Charge.

Supply only of gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 15 to 20 mm complete all as specified and directed by Engineer-in-Charge.

Supply only of gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 25 to 40 mm complete all as specified and directed by Engineer-in-Charge.

Taking down old unsv old sluice valve and supply and fixing Sluice Valve/ ball valve (having SS ball) with both CI end flanged, ISI marked, with nuts, bolts and washer and rubber gasket with stainless steel handle over PVC coating complete all as specified and directed for 80 mm bore pipe complete all as specified and directed. Make - Zoloto/ Bir / BVI.

Supply only Sluice Valve/ ball valve (having SS ball) having SS ball with both CI end flanged, ISI marked, with required nuts, bolts and washer and rubber gasket with stainless steel handle over PVC coating complete all as specified and directed for 80 mm bore pipe. Make - Zoloto/ Bir / BVI.

Taking down old unsv old sluice valve and supply and fixing sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 16 confirming to IS 14846-2000 including necessary fixing arrengemet such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packings material etc all as specified and directed for 200 mm dia complete all as specified and directed. Make - Zoloto/ Bir / BVI.

Supply only sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 16 confirming to IS 14846-2000 including necessary fixing arrengemets such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packings material etc all as specified and directed for 200 mm dia. Make - Zoloto/ Bir / BVI.

Taking down old unsv old sluice valve and supply and fixing sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 16 confirming to IS 14846-2000 including necessary fixing arrengemet such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packings material etc all as specified and directed for 100 mm dia complete all as specified and directed. Make - Zoloto/ Bir / BVI.

Supply only sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 16 confirming to IS 14846-2000 including necessary fixing arrengemets such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packings material etc all as specified and directed for 100 mm dia. Make - Zoloto/ Bir / BVI.

Supply Only of Insulation Lagging material (to pipes used in water supply), 40 mm thick, nitrile foam or equivalent material, internal diameter of 20 mm to 40 mm (as required).

Supply only of 400 mm wide Aluminium sheet metal of thickness as as mentioned in IS 9842.

Supply only of 450 mm x 5 mm Nylon Cable ties.

Supply only Binding/ Tying wire made of Mild Steel, soft drawn, annealed, 1 mm thick.

Supply only of 10 Sqmm 3 Core Flat Type Submersible Cable with copper conductor and PVC/XLPE insulation for submersible pump.

Supply only of 16 Sqmm 3 Core Flat Type Submersible Cable with copper conductor and PVC/XLPE insulation for submersible pump.

Repair /Replacement of Chlorine Dosing Pump's Dosimeter Motor, by repair of existing motor/ replacement of dosing pump motor with a new motor of 10 LPH, with controller and power supply components, of make of Pure Oxidane or other makes as approved by E-in-C's office or as approved by Engineer in Charge, complete, all as specified, directed and clarified by engineer in charge.

Dewatering of sump by pumping clean water sump of size and capacity (10000 to 50000Gln) and cleaning complete all as directed by the Engineer-in-charge. Note :- Sump will be cleaned 2 times, first clean at the start month of the contract and second will be after 6 month of first cleaning date.

Taking out sludge (Any plastering work/ white washing work/ distempering work will be measured seperately) from tank of size and capacity (10000 to 40000Gln), removing the same to a distance not exceeding 50m with & including, cleaning the sump by wire brushing including brooming down complete, all as directed by the Engineer-in-charge. Note - Any plastering work/ white washing work/ distempering work will be measured seperately.

Dewatering of chlorination/ sedimentation tank at Zangli, by pumping clean water in sump, cleaning the same complete all as directed by the Engineer-in-charge. Note :- Sump will be cleaned 2 times, first clean at the start month of the contract and second will be after 6 month of first cleaning date.

Taking out sludge (Any plastering work/ white washing work/ distempering work will be measured seperately) from chlorination tank/ sedimentation tank at Zangli, removing the same to a distance not exceeding 50m with & including, cleaning the sump by wire brushing, complete all as directed by the Engineer-in-charge.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:3, including preparing old surfaces by taking down old plaster and cleaning of the same, finishing with Neeru finish to plastering as specified.

Material and Labour for two coats of colour Washing including preperations of surfaces plastered or unplastered and Washing, rubbing down and stopping of distempered and painted surfaces on side walls complete all as specified and as directed.

Material and Labour for two coats of Oil bound distemper including preperations of surfaces plastered or unplastered and Washing, rubbing down and stopping of distempered and painted surfaces on side walls complete all as specified and as directed.

Supply only of Car Shampoo Concentrate, for cleaning of water sumps, packaged in 2.5 litre packs in plastic cans, with OEM dilution ratio of not more than 1:200 of preferable make of Waxpool, but other makes also may be accepted if of reasonably good quality.

Supply only of Weediside concentrate, as desired by Engineer in Charge, for destruction of weeds in and around water supply establishments.

Material and labour for repair of centrifugal motor pump set 60 HP (Rewinding job will be measured seperateley), including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6308-02 Nos, replacement of worn out bearing housing, replacement of gland bush, unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as directed.

Material and labour for repair of centrifugal motor pump set 40 HP (Rewinding job will be measured seperateley), including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6312-02 Nos, replacement of worn out bearing housing, replacement of gland bush , unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as directed.

Material and labour for repair of centrifugal motor pump set 20/ 25 HP (Rewinding job will be measured seperateley), including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6307-02 Nos, replacement of worn out bearing housing, replacement of gland bush , unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as directed.

Material and labour for rewinding of 60HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed by the Engineer-in Charge.

Material and labour for rewinding of 40HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed by the Engineer-in Charge.

Material and labour for rewinding of 20/25HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed by the Engineer-in Charge.

Material and labour for rewinding of 5 HP to 10 HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed by the Engineer-in Charge.

Material and labour for repair of submersible motor of capacity of 5 to 10 HP (MES manpower and tools may be used by the contractor for removal and reinstallation of submersible motor pump from borewell (if desired), with one representative of contractor present to guide the MES manpower and ensure quality), transporting the same to workshop (and back) for repair and replacement of worn impellers -01 set , replacement of worn out bushings and bearings and transport back repaired pump set back to site after repair and Lowering the same in the bore well after testing complete all as specified and directed by the Engineer - in Charge. Note : (a) Rewinding is taken as a seperate item.

Material and labour for repair of submersible motor of capacity of 5 to 10 HP (MES manpower and tools may be used by the contractor for removal and reinstallation of submersible motor pump from borewell (if desired), with one representative of contractor present to guide the MES manpower and ensure quality), transporting the same to workshop (and back) for repair and replacement of worn impellers -01 set , replacement of worn out bushings and bearings and transport back repaired pump set back to site after repair and Lowering the same in the bore well after testing complete all as specified and directed by the Engineer - in Charge. Note : (a) Rewinding is taken as a seperate item.

Material and labour for rewinding of submersible motor 25 HP by taking out the burnt out winding from the strater with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rewinding of submersible motor 5 HP by taking out the burnt out winding from the strater with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rewinding of submersible motor 7.5 HP by taking out the burnt out winding from the stator with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed by the Engineer-in-Charge.

Supply only (with training in) Manual Motor Winding Machine, suitable for motors from 2 hp to 40 HP, with inbuilt rotation counter, handle, gears set, stand, various sized JIGs and Fixtures for various sized motors, complete with any other accessories and parts for operation.

Supply only of various sized super enamelled copper wire (as required) for motor winding, duly insulated/ varnished, heat treated and baked in an oven, complete as described, specified, directed and clarified by engineer in charge.

Supply only of 5 HP Submersible/ centrifugal (as required at site) Motor Pump, of head and throughput output as mentioned at site, complete with all related accessoried for installation and operation. Make : Kirloskar/ KSB/ Crompton/ Usha/ CRI/ Greaves or equivalent as approved by engineer in charge.

Supply only of 1 HP Centrifugal Motor Pump, of head and throughput output as mentioned at site, complete with all related accessoried for installation and operation. Make : Kirloskar/ KSB/ Crompton/ Usha/ CRI/ Greaves/ Havells or equivalent as approved by engineer in charge.

Supply only of 0.5 HP Centrifugal Motor Pump, of head and throughput output as mentioned at site, complete with all related accessoried for installation and operation. Make : Kirloskar/ KSB/ Crompton/ Usha/ CRI/ Greaves/ Havells or equivalent as approved by engineer in charge.

Supply only of Glass of thickness of 10 mm, with etching as per design provided, all sides and corners rounded (and holes and bolts provided for hanging, if required by MES), for use as boards in installations.

Supply only of White board (double sided) of thickness of 4.5 cm, with all sides and corners rounded and covered with aluminium borders, for use as boards in installations.

Supply only of Easel type tripod stand for above mentioned board, of 5 feet height, capable of holding upto 5 kgs.

Supply only of Flex Sheet (printed with design and text provided by MES), for use as boards in installations.

Supply only of MS frame support for above mentioned flex sheet.

Supply only GI Union 50 mm dia complete all as specified and directed by the Engineer-in-charge.

Supply only GI Union 15 mm dia complete all as specified and directed by the Engineer-in-charge.

Supply only GI Union 20 mm dia complete all as specified and directed by the Engineer-in-charge.

Supply only GI Union 25 mm dia complete all as specified and directed by the Engineer-in-charge.

Supply only GI Union 40 mm dia complete all as specified and directed by the Engineer-in-charge.

Supply only GI Union 80 mm dia complete all as specified and directed by the Engineer-in-charge.

Supply only GI Union 100 mm dia complete all as specified and directed by the Engineer-in-charge.

Supply only of sanitary GI fitting 15 mm dia (such as elbow, socket, nipple, plug, etc - One item only) complete all as specified and directed by the Engineer-in-charge.

Supply only of sanitary GI fitting 20 mm dia (such as elbow ,socket ,nipple ,plug, etc - One item only) complete all as specified and directed by the Engineer-in-charge.

Supply only of sanitary GI fitting 25 mm dia (such as elbow ,socket ,nipple ,plug, etc - One item only) complete all as specified and directed by the Engineer-in-charge.

Supply only of sanitary GI fitting 40 mm dia (such as elbow ,socket ,nipple ,plug, etc - One item only) complete all as specified and directed by the Engineer-in-charge.

Supply only of sanitary GI fitting 50 mm dia (such as elbow ,socket ,nipple ,plug, etc - One item only) complete all as specified and directed by the Engineer-in-charge.

Supply only of sanitary GI fitting 80 mm dia (such as elbow ,socket ,nipple ,plug, etc - One item only) complete all as specified and directed by the Engineer-in-charge.

Fixing only of 100 mm bore Cast Iron foot valve flanged ends, swing type operation with rubber sheet, as per IS : 4038 including taking out unserviceable foot valve complete all as specified and as directed .

Supply only 100 mm bore Cast Iron foot valve flanged ends, swing type operation with rubber sheet, as per IS : 4038 complete all as specified and as directed.

Fixing only of 100 mm bore Cast Iron foot valve flanged ends, swing type operation with rubber sheet, as per IS : 4038 including taking out unserviceable foot valve complete all as specified and as directed .

Supply only 80 mm bore Cast Iron foot valve flanged ends, swing type operation with rubber sheet, as per IS : 4038 complete all as specified and as directed.

Supply only CI Non return valve of size 100mm bore without bypass arrangement swing type confirming to IS 5312-1 flanged end, pressure rating PN 16 complete all as specified and directed.

Supply only CI Non return valve of size 50mm bore without bypass arrangement swing type confirming to IS 5312-1 flanged end, pressure rating PN 16 complete all as specified and directed.

Supply only CI Non return valve of size 80mm bore without bypass arrangement swing type confirming to IS 5312 flanged end pressure rating PN 16 complete all as specified and directed.

Developing of borewell (Diesel will be provided by MES) by means of compressor of min @ 250 PSI capacity and pumping by means of 25% extra pump capacity until the sand free water obtained and all as specified and directed. Note : All the test to be carried out in front of Engineer - in - Charge and ensure existing yield.

Taking out unserviceable filter media of any sizes from sand filters and pressure filter, washing them with pressured water (for removing all impurities), drying and depositing not exceeding 100 mtr and replace with same/ following filter media all as specified and directed.

Supply only filter media of Size of ½ '' (Quantity may be increased to any extent)

Same as above but of Size ¾''

Same as above but of Size o 3/16'' to 1/16''

Same as above but of Size below 1/16'' (core sand)

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 32x6mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earthing pit and cover 55mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) common salt, charcoal and testing on completion, all as specified and directed.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) of Regular Epoxy Compound Cement - M Seal/ Fevitite 100g pack.

Testing of Water Samples, (to include Physical parameters (such as Turbidity, Colour (in hazens), PH, ORP, TDS, TOC, COD, BOD, Total Alkalinity, Hardness), Chemical Parameters such as (Free Chlorine, Residual Chlorine, Flouride, Iron, Copper, Lead, Nitrates, Nitrites, Cyanuric Acid), biological parameters (such as Chromium, E Coli, Total Coliform, Claustradium Deficile)) with six copies of reports, duly signed by a doctor (community medicine/ preventive medicine/ equivalent specialist) or an epidemiologist or a microbiologist or a environment and water sanitation engineer, with the sample taken in a 1 L glass water bottle duly sterilized (bottle will be handed over to MES after test)

Supply only of 1 litre glass water bottle with metallic cap, duly sterilised for water sample collection, all as specified and directed by engineer in charge

Supply only Alum Ferric grade IV for water treatment as approved by Engineer-in-Charge.

Supply only of bleaching powder (Calcium Hypochlorite) having minimum chlorine content of 65% (if chlorine content is less, then proportionally more quantity will have to be given) in granular/ powder form for water disinfection, packed in hematically sealed containers. Make Rayalaseema, Altoch, Potterwatt or Aquafit or as approved approved by Engineer-in-Charge.

Supply only (with presense during commissioning and installation, including guidance - Installation done by MES Staff) 50HP Star delta starter. Make Havells or as approved by engineer in charge.

Supply only (with presense during commissioning and installation, including guidance - Installation done by MES Staff) 60HP Star delta starter. Make Havells or as approved by engineer in charge.

Supply only (with presense during commissioning and installation, including guidance - Installation done by MES Staff) 20HP Star delta starter. Make Havells or as approved by engineer in charge.

Supply only (with presense during commissioning and installation, including guidance - Installation done by MES Staff) 7.5HP Star delta starter. Make Havells or as approved by engineer in charge.

Supply only (with presense during commissioning and installation, including guidance - Installation done by MES Staff) starter for submersible pump 7.5 HP. Make Havells.

Supply only (with presense during commissioning and installation, including guidance - Installation done by MES Staff) starter for submersible pump 25 HP. Make Havells.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) rubber Star coupling of size L-190 for 40HP Centrifugal pump set complete all as specified.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) rubber Star coupling of size L-225 for 60HP Centrifugal pump set complete all as specified.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) gland packing (with lead lining) of suitable size for pumps of any capacity all as directed by Engineer-in -Charge.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) gland packing (without lead lining) of suitable size for pumps of any capacity all as directed by Engineer-in -Charge.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) Bearing of suitable size for 40/60 HP pump all as directed by Engineer-in -Charge.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) Bearing of suitable size of upto 25 HP pump all as directed by Engineer-in -Charge.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) leather gasket suitable for 80/100 mm dia pipe all as directed.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) of Duct tape (for seaming, sealing, patching and repairing in plumbings) , 2 inches (50 mm) wide and 60 yards (54.8 meters ) long, made of gauze textile fiber with a hot-melt adhesive coating, silver colour pn-20 strength of make of 3M/Amazonbasics or equivalent ,all as specified and directed by Engineer-in-Charge.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) CI Coller suitable for CI pipes (of dia as required) all as directed and specified by Engineer in Charge based on suitability of site.

Supply only Teflon tape all as directed.

Supply and training in PPR Pipe welding machine (with all required accessories), with capability to weld PPR pipes of sizes of 20, 25, 32, 40, 50 and 63mm (including necessary dies and fixtures, heating components, etc,.,), capable of operation in ambient temperature of -20 to 55 degree Celsius and producing a heating Head Temperature of 260 degree Celsius ( ±5 degrees celsius) and operational between Input AC Voltage Range of 150V to 240V (50 Hz) with surger and over temperature protection features.

Supply only (with presense during installation, including guidance - Installation done by MES Staff) CI flange for 80mm /100 mm dia pipe tape all as directed and specified by Engineer in Charge based on suitability of site.

Supply only Pig lead all as directed and specified by Engineer in Charge based on suitability of site.

Supply only leadwool all as directed and specified by Engineer in Charge based on suitability of site.

Supply only Spun Yarn all as directed and specified by Engineer in Charge based on suitability of site.

Labour only for Fixing (material provided by MES, or as per below item), water tanks of capacity of upto 1000 litres, open or closed, hoisted and fixed in position.

Supply only Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) all as specified in SSR Part I of capacity of 1000 litres, all as directed by engineer in charge.

Supply only Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) all as specified in SSR Part I of capacity of 500 litres , all as directed by engineer in charge.

Labour only for fxing of GI Tee (once labour is provided, it is MES responsibility to provide site for atleast 10 GI tees per person per day) to existing pipes by threading existing pipes, including any consumables, with GI Tees supplied by MES as below:

Supply only of GI Tee Joint fittings, 15 mm, all as directed by engineer in charge.

Supply only of GI Tee Joint fittings, 20 mm, all as directed by engineer in charge.

Supply only of GI Tee Joint fittings, 25 mm, all as directed by engineer in charge.

Supply only of GI Tee Joint fittings, 40 mm, all as directed by engineer in charge.

Supply only of GI Tee Joint fittings, 50 mm, all as directed by engineer in charge.

Supply only Nut & Bolts of any size, SS, all as directed by Engineer-in-charge.

Supply only Nut & Bolts of any size, annealed and hardened, alloy/ tool steel - TVS type, all as directed by Engineer-in-charge.

M/S Himalayan Construction and Co.

Bidder Name

M/S Himalayan Construction and Co.

M/S ASHRAF CONSTRUCTIONS