Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC | ₹7.0 L | L1 | Accepted-AOC - |
| 2 | Rejected-Technical | - | - | Rejected-Technical - |
Tender Value
₹8.4 L
EMD Value
₹16,840
Closing Date
15 Mar 2024, 3:00 pmClosed
Executive Officer
359, Sathy Athani Main Road, T.N.Palayam, Vaniputhur Town Panchayat
Construction of Motor Room and 2000 Liter HDPE Tank at Ward No.1 Pallathumedu Sanitary Workers Quaters, Ward No.10 Pallathur Main Road, Ward No.10 MGR Nagar and Ward No.07 Pudhu Street, Ward No.12 Sriram Nagar Pipe Line Extension in Vaniputhur TP
2024_DTP_447528_1
86/2024
Open Tender
Civil Works - Water Works
Works
90 days
Vaniputhur Town Panchayat
2 documents required · 2 mandatory
₹0
₹16,840
Yes
15 Mar 2024
12 Mar 2024
15 Mar 2024
12 Mar 2024
15 Mar 2024
12 Mar 2024
12 Mar 2024 - 15 Mar 2024
Amount
Earthwork excavation and depositing on bank with an intial lead of 10m and lift of 2m in the following classification of soils as directed by Department officers. Hard stiff clay black cotton, hard red earth shales, murram, ordinary gravel, stoney earth and earth mixed with small size boulders for foundation SS 20B
Supply and filling with Stone Dust including cost and conveyance from approved quarry to site and all labour charges for filling, levelling, compacting, watering with all leads for water etc., complete as per Standard Specification
Plain Cement concrete of mix 1:4:8 (One part cement, four part sand & eight part aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges for mixing, placing, ramming, curing, finishing etc, complete.
Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.
Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.
Centering and Shuttering for sides & soffit of PCC & RCC works using MS Sheet / Country Wood Plank Shutters supported by necessary casurina props / wedges including cost and hire charges of all materials to site and all labour charges etc. Complete as per standard specification as per TNDSS NO : 30 & 86.
Brick work in Cement Mortar in 1:5 ( One cement and Five Sand ) using best quality of Stock bricks of size 8¾x 4¼ x 2¾ including all cost of materials and labour charges including Curing charges etc., complete as per Standard Specification.
Plastering with cement motor 1:3mix to 10mm for ceiling including cost and conveyance of all materials from approved quarry to site and all labour charges etc., complete as per Standard Specification
Plastering with cement motor 1:5mix to 12mm thick including cost and conveyance of all materials from approved quarry to site and all labour charges etc., complete as per Standard Specification
Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. - Fully Panelled Single Leaf Door of Size 0.90m x 2.00m
Painting the walls two coats with best Cement Paint of approved colour and quality including cost and conveyance, preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers
Painting two coats over new Iron Work with approved synthetic enamel paint including cost and conveyance, preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers
Supply and delivery and fixing of 2000 Litres Capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
Supply and delivery of 90mm dia 6KSC Un Plasticized PVC Pipes for Potable Water Supply as per IS 4985 / 2000, including cost and conveyance of pipe and stacking at site etc., complete
Supplying and delivery of PVC Specials including cost and conveyance of all materials and stacking at site etc., complete 90mm dia PVC Coupling
90mm dia PVC Bend
100mm dia GM Gate Valve :
PVC Solvent Cement Solution
Lowering of 90mm dia PVC Pipes with specials in the trenches and laying to proper alignment and gradiant of water flow and as directed by the department complying with Standard Specification
Refilling with excavated earth complying with standard specification for filling in foundation including all labour charges as per SS
SRIDHAR . K.P
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_532962.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].