Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.8 LAccepted-AOC | ₹37.8 L Quoted ₹32.0 L | L1 | Accepted-AOC On being L1 |
| 2 | L2₹34.3 LRejected-Finance | ₹34.3 L | L2 | Rejected-Finance On being L2 |
| 3 | Rejected-Technical FLAT NO 4B 4TH FLOOR WELKIN HEIGHT 1648 GARIA MAIN ROAD KOLKATA 700084 | 24 PARAGANAS SOUTH | WEST BENGAL | 700084 | - | - | Rejected-Technical Not accepted due to non conformance to clause 8(D) of NIT |
| Sl No | Description | Qty | Unit | RAJWANCE CONSTRUCTION L2 | CKS consutling Engineers Private Limited L1 |
|---|---|---|---|---|---|
| 1.00Electrical Cable “ISI" Marked - | |||||
| 1.01 | Sensor cable 1.5 sqmm, 4 core, flexible, copper, 1100 volt - ISI marked | 250 | Mtrs | 130 ₹32,500 | 123.24 ₹30,808.80 |
| 1.02 | Power cable 1.5 sqmm, 24 core, flexible, copper, 1100 volt - ISI marked | 350 | Mtrs | 760 ₹2.7 L | 745.66 ₹2.6 L |
| 2.00 | Foggy shower Nozzles Rotation: 180 deg/ 360 deg, Throw: 60 mtr | 21 | Nos | 14,500 ₹3.0 L | 12,870 ₹2.7 L |
| 3.00 | Spray riser support system with fittings with MS angle and anti climbing device (made of steel material)
1) Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
3) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering — All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
4) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work | 21 | Nos. | 4,000 ₹84,000 | 3,631.32 ₹76,257.72 |
| 4.00 | Auto-valve, Normally close 1.5N /SS-304/CF-8 with normally closed pilot operated Diaphragm type solenoid valve screwed end 50mm, operating voltage 110V AC | 21 | Nos. | 5,500 ₹1.2 L | 5,011.34 ₹1.1 L |
| 5.00 | GI pipe medium grade - ISI Mark 65mm-dia | 20 | Mtrs | 1,000 ₹20,000 | 979.11 ₹19,582.20 |
| 6.00 | GI pipe medium grade - ISI Mark 150mm-dia | 350 | Mtrs | 2,200 ₹7.7 L | 2,151.76 ₹7.5 L |
| 7.00 | Coil 110V AC with plunger | 21 | Nos. | 5,000 ₹1.1 L | 4,791.6 ₹1.0 L |
| 8.00Providing and fixing of gun metal Gate vlave / CI sluice valve with caps | |||||
Tender Value
₹38.1 L
EMD Value
₹47,700
Closing Date
27 Oct 2025, 5:00 pmClosed
Pramod Swarnkar, Sr Manager (EnM)
Office of the Project Engineer (EnM), ILBL OCP, Lakhanpur Area, MCL
Diversion of existing sensor actuated PLC based fully Foggy-Mist generating shower system installed at siding 7 of ILBL OCP, Lakhanpur Aea, MCL.
2025_MCL_345446_1
MCL/LKPA/ILBL/ePC-EM/25-26/29
Open Tender
Miscellaneous Works
75 days
EnM Department, ILBL OCP, Lakhanpur Area, MCL
Please refer Tender documents.
5 documents required · 5 mandatory
₹47,700
3 Jan 2026
14 Oct 2025
29 Oct 2025
14 Oct 2025
27 Oct 2025
15 Oct 2025
14 Oct 2025 - 20 Oct 2025
Amount
Electrical Cable “ISI" Marked -
Sensor cable 1.5 sqmm, 4 core, flexible, copper, 1100 volt - ISI marked
Power cable 1.5 sqmm, 24 core, flexible, copper, 1100 volt - ISI marked
Foggy shower Nozzles Rotation: 180 deg/ 360 deg, Throw: 60 mtr
Spray riser support system with fittings with MS angle and anti climbing device (made of steel material) 1) Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 2) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 3) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering — All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) 4) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work
Auto-valve, Normally close 1.5N /SS-304/CF-8 with normally closed pilot operated Diaphragm type solenoid valve screwed end 50mm, operating voltage 110V AC
GI pipe medium grade - ISI Mark 65mm-dia
GI pipe medium grade - ISI Mark 150mm-dia
Coil 110V AC with plunger
Providing and fixing of gun metal Gate vlave / CI sluice valve with caps
Pressure Gauge (0-12 bar-4" DIAL) 6" dia ISI Marked
Pipe Fittings:
GI Flange 150 mm x 12/14mm
SCI Plain Bend 150mm
Plain Bend 75 mm x 250 mm (L)
Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. External work for cable duct.
Providing and fixing bolts including nuts and washers complete.
Pressure Relief Valve, Dia-40-50 mm, 6-14 Kg/cm2 adjustable control. Brass make
Construction on one no of RCC pillar (03 meter) 1) Earth work in Excavation 2) Supplying & filling in plinth with sand 3) Providing & laying in position cement concrete (1:3:6) 4) Providing & laying in position specific grade (1:1.5:3) 5) Reinforced cement concrete work in walls (1:1.5:3) 6) Steel Reinforcement for RCC work 6 Thermo-mechanically Treated Bars 7) Centering and shuttering including foundations etc. 8) Centering and shuttering including Columns, Pillars, Piers etc. 9) Filling available excavated earth (excluding rock) in trenches 10) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
Fabrication and installation, commissioning & trial run of the system for 15 days
Total impact of Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC
RAJWANCE CONSTRUCTION (BID ID -1192978)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.59 MB
Tendernotice_2.pdf
PDF • 0.99 MB
BOQ_358113.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid