REPAIRS, MAINTENANCE, POLISHING AND PAINTING TO WOODEN AND STEEL FURNITURE AT MASIMPUR, VAIRENGTE, LAILAPUR AND AIZAWL UNDER GE SILCHAR

Amount

WOODEN FURNITURE

M&L for carrying out repair and replacement of the following under-mentioned parts of bed hard by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-246

S&F leg of size 60x60x660mm made out of 1st class hard wood (head rest side)

S&F leg of size 60x60x500mm made out of 1st class hard wood (foot rest side)

S&F long rail frame of size 35x90x1980mm long made out of 1st class hard wood

S&F short rail frame of size 60x60x900mm made out of 1st class hard wood

S&F head board frame made out of 1st class hard wood with 4mm thick OST plywood as per existing shape & size

S&F foot board frame made out of 1st class hard wood with 4mm thick OST plywood as per existing shape & size

S&F ply top made out of 12mm thick commercial plywood of size 1800x900mm BWR ISI marked IS-303 as approved

S&F stiffiner to support made out of 1st class hard wood of size 40x60x900mm

S&F 3.5mm thick one side teak face plywood alongwith half round teakwood beading allround

M&L for carrying out repair and replacement of the following under-mentioned parts of book case by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-237

S&F legs made out of 1st class hard wood

S&F long rail of 1st class hard wood (of leg frame)

S&F short rail of 1st class hard wood (of leg frame)

S&F back side 6mm thick BWR grade plywood

S&F top 18mm thick pre-laminated particle board

S&F both side / bottom / partition made out of 18mm thick pre-laminated particle board

S&F shelf made out of 18mm thick pre-laminated particle board with 6mm thick wooden beading at front

S&F shutter made out of 18mm pre-laminated particle board commercial with 4mm thick wooden beading all round with 1No. CP knob of approved design

M&L for carrying out repair and replacement of the following under-mentioned parts of chair wooden bottom w/o arms by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-225

S&F front leg of size 50x50x445mm high made out of 1st class hard wood

S&F rear leg of size 40x65x840mm high made out of 1st class hard wood

S&F front rail of size 25x65x415mm long made out of 1st class hard wood

S&F rear rail of size 25x65x375mm long made out of 1st class hard wood

S&F side rail of size 30x65x390mm long made out of 1st class hard wood

S&F back stiffner 15x50x375mm long (slightly curved) made out of 1st class hard wood

S&F stiffiner of size 20x25x400mm long made out of 1st class hard wood 100mm high from bottom

S&F back rest made out of 6mm thick plywood BWR grade ISI marked as approved

S&F seat made out of 6mm thick plywood BWR grade ISI marked with 6mm dia perforations to be provided to plywood seat as approved

M&L for carrying out repair and replacement of the following under-mentioned parts of chair easy by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-229 & FD-1108

S&F front legs of size 55x25x535mm high made out of 1st class hard wood

S&F rear legs of size 55x25x535mm high made out of 1st class hard wood

S&F front rails of size 25x70x520mm long made out of 1st class hard wood

S&F rear rail of size 50x25x500mm long made out of 1st class hard wood

S&F side rails of size 40x70x520mm long made out of 1st class hard wood

S&F lower / upper rail of back rest made out of 1st class hard wood

S&F side rail of back rest made out of 1st class hard wood

S&F of arms of size 65x25x610mm long made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of chair easy wooden with plastic cane seat and back of size 545x545x40mm by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

S&F front legs of 1st class hard wood

S&F rear legs of 1st class hard wood

S&F front rails made out of 1st class hard wood

S&F rear rails made out of 1st class hard wood

S&F side rails made out of 1st class hard wood

S&F lower / upper rails of back rest made out of 1st class hard wood

S&F side rails of back rest made out of 1st class hard wood

S&F arm made out of 1st class hard wood

M&L for removing existing old worn out nylon cane and reweaving with new 4mm thick oval shaped nylon cane of approved quality, in Godrej pattern and off white/cream colour

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-228 & FD-279

S&F front leg of size 30x55x460mm high made out of 1st class hard wood

S&F rear leg of size 30x55x890mm high made out of 1st class hard wood

S&F front rail of size 30x65x440mm long made out of 1st class hard wood

S&F rear rail of size 30x65x405mm long made out of 1st class hard wood

S&F of side rail of size 30x65x430mm long made out of 1st class hard wood

S&F back rest made out of 1st class hard wood

S&F stiffiner of size 25x19x400mm long made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining cushioned by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/04

S&F front leg of size 45mmx45mmx460mm high made out of 1st class hard wood

S&F rear leg of size 45mmx65mmx890mm high made out of 1st class hard wood

S&F front rail of size 30x65x400mm long made out of 1st class hard wood

S&F rear rail of size 30x65x400mm long made out of 1st class hard wood

S&F side rail of size 30x65x400mm long made out of 1st class hard wood

S&F seat made out of 12mm thick ply bottom with 40 density foam cushion 75mm thick duly covered with tapestry cloth / letherite material (not less than Rs. 250/m) as approved

S&F back stiffner of size 15x30x500mm long horizontal rest slightly curved U shaped made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/05

S&F front leg of size 45mmx45mmx460mm high made out of 1st class hard wood

S&F rear leg of size 45mmx65mmx890mm high made out of 1st class hard wood

S&F front rail of size 30x65x400mm long made out of 1st class hard wood

S&F rear rail of size 30x65x400mm long made out of 1st class hard wood

S&F side rail of size 30x65x400mm long made out of 1st class hard wood

S&F back rest made out of 1st class hard wood

S&F stiffiner of size 25x19x400mm long made out of 1st class hard wood

S&F 4mm thick PVC seat (single moulded piece) of approved design and colour

M&L for carrying out repair and replacement of the following under-mentioned parts of chair dining of size 890x440x430mm by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

S&F front leg made out of 1st class hard wood

S&F rear leg made out of 1st class hard wood

S&F front rail made out of 1st class hard wood

S&F rear rail made out of 1st class hard wood

S&F side rail made out of 1st class hard wood

S&F back rest made out of 1st class hard wood

S&F stiffiner made out of 1st class hard wood

M&L for removing existing old worn out nylon cane and reweaving with new 2mm thick oval shaped nylon cane of approved quality, in Godrej pattern and off white/cream colour

M&L for carrying out repair and replacement of the following under-mentioned parts of chair writing by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-280

S&F front leg of size 55x30x660mm long made out of 1st class hard wood

S&F rear leg of size 55x30x890mm long made out of 1st class hard wood

S&F front rails of seat frame made out of 1st class hard wood

S&F rear rails of seat frame made out of 1st class hard wood

S&F side rails of seat frame made out of 1st class hard wood

S&F back rails of back rest frame made out of 1st class hard wood

S&F stiffiner of size 25x20x450mm made out of 1st class hard wood

S&F arms of size 55x19x495mm long made out of 1st class hard wood

M&L for carrying out repair and replacement of the following under-mentioned parts of table 3'x2' with drawer or w/o drawer by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-223, FD-224, FD-283 & FD-284

S&F leg of size 60x30x740mm high made out of 1st class hard wood

S&F short rail of size 20x60x600mm long made out of 1st class hard wood

S&F long rail (with drawer) of size 20x60x900mm long made out of 1st class hard wood

S&F long rail of size 20x60x900mm long made out of 1st class hard wood

S&F drawer as per existing shape & size made out of 1st class hard wood with 1No. CP knob of approved design

S&F stiffiner of size 25x40x600mm long made out of 1st class HW

S&F table top made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of locks of table writing wooden of size 300x450x380mm by removing carefully the existing unserviceable / damaged lock and replacing of required size and shape complete all as as specified and as directed Note: Reference drawing TP

M&L for carrying out repair and replacement of the following under-mentioned parts of table writing by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-275

S&F leg 35x55x732mm high made out of 1st class hard wood

S&F top long rail 25x50x790mm long made out of 1st class hard wood

S&F top short rail 25x50x600mm long made out of 1st class hard wood

S&F bottom rail (side/short stiffener) 20x50x355mm long made out of 1st class hard wood

S&F bottom rail (front/long stiffener) 20x50x355mm long made out of 1st class hard wood

S&F cabinet side of table made out of 19mm MDF board commercial with 1mm thick laminated sheet

S&F cabinet back with 6mm ply wood commercial

S&F cabinet bottom of 19mm thick MDF board commercial

S&F cabinet bottom legs of 1st class hard wood

S&F door / front shutter of cupboard as per existing size & shape made out of 19mm thick MDF board commercial with 1mm thick laminated sheet (ofapproved colour and pattern) with 50mm cadmium plated stainless steel hinges and suitable locks (ISI marked)

S&F of drawer as per existing shape and size with 1No. CP knob of approved design

S&F table top of size 1145x600mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (4 persons) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/03

S&F leg of size 90x45x750mm heigh made out of 1st class hard wood

S&F of long rail of size 45x90x1200mm long made out of 1st class hard wood

S&F of short rail of size 45x90x900mm long made out of 1st class hard wood

S&F table top of size 1200x900mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (6 persons) by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-239

S&F leg of size 60x60mm at top and 40x40mm at bottom and 732mm high made out of 1st class HW

S&F long rail of size 25x100x1220mm long made out of 1st class hard wood

S&F short rail of size 25x100x670mm long made out of 1st class hard wood

S&F top of size 1500x900mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining (6 persons) MAP by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/MAP-II/03

S&F leg made out of 1st class HW

S&F long rail made out of 1st class hard wood

S&F short rail made out of 1st class hard wood

S&F top made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of table center by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-235, FD-274

S&F leg of size 45x45mm at top and 25x25mm at bottom and 30x60mm and 372mm high made out of 1st class HW

S&F long rail of size 25x50x600mm long and 20x50x900mm made out of 1st class HW

S&F short rail of size 40x19x450mm long made out of 1st class HW

S&F table top of size 900x450mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of teapoy by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-232, FD-278

S&F leg of size 60x30mm and 45x45mm at top and 25x25mm at bottom and 522mm high made out of 1st class HW

S&F long rail of size 20x50x600mm long and 19x40x450mm long made out of 1st class HW

S&F short rail frame of size 20x50x450mm long and 19x40x300mm long made out of 1st class HW

S&F top of size 600x450mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of peg table by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-277, FD-384

S&F leg of size 30x50x370mm high made out of 1st class HW as per existing size & shape

S&F top long rail of size 20x40x450mm long made out of 1st class HW

S&F top short rail of size 20x40x300mm long made out of 1st class HW

S&F top of size 450x300mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of peg table glass top by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1114

S&F sides of size 380x380mm made out of 18mm thick laminated MDF board as per existing size & shape with 4mm thick wood edging all round

S&F bottom shelf made out of 18mm thick laminated MDF board as per existing size & shape

S&F top made of 6mm thick clear glass sides duly rubbed

M&L for carrying out repair and replacement of back ply of looking mirror of size 1500x450mm by removing carefully the existing unserviceable / damaged back and replacing with 6mm thick ply BWR grade complete all as as specified and as directed Note: Reference drawing TP

M&L for carrying out repair and replacement of the following under-mentioned parts of table dressing (gents) with mirror by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-230

S&F table top made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F bottom partition made of 18/19mm thick block board commercial type ISI marked of size 900x300mm

S&F back made out of 12mm thick ply wood commercial, BWR grade

S&F side and partition made out of 12mm thick pre-laminated particle board

S&F drawer of existing size, made out of 12mm thick plywood with 01No. CP knob of approved design at front

S&F 5mm thick mirror of size 380x760mm with 6mm thick plywood commercial back 1st class hard wood frame all around with 2Nos. key plate of existing size, type and of approved design

Removing old existing polish by washing with caustic soda and rubbing with sand paper and smoothening surfaces and applying two coats of french polish, glossy finish for the following as shown on drawings, as specified and as directed

Bed Hard (FD-246)

Book case (FD-237)

Chair WB W/O arms (FD-225)

Chair easy (FD-229, FD-1108)

Chair dining (FD-279, FD-228, FD/MAP-II/05)

Chair dining with cushion (FD/MAP-II/04)

Chair writing (FD-280)

Table 3'x2' with drawer / WO drawer (FD-224, FD-231, FD-283, FD-284)

Table writing (FD-275)

Table dining 4 persons (FD/MAP-II/04)

Table dining 6 persons (FD-239, FD/MAP-II/04)

Table centre (FD-235, FD-274)

Teapoy (FD-232, FD-278)

Peg table (FD-277, FD-384)

Peg table with glass top (FD-1114)

Table dressing (Gents) (FD-230)

Sofa set 5 seater (FD-281, FD/E6/MAP-II/02)

Sofa set 4 seater (FD-281, FD/E6/MAP-II/02)

Removing of old worn out / unserviceable cane from various types of furniture and re-canning the same with new plastic cane (oval shaped), white coloured, 2mm wide for caning and 4mm wide half round for beading in Godrej pattern complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-228, FD-229, FD-279, FD-280, FD-1108

S&F in repairs foam cushion 530x560x100mm thick 40 density rubber foam duly covered with marking cloth and tapestry cloth as approved (not less than Rs. 250/- per meter) having one side long chain with double interlocking complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-281

S&F in repairs cushion cover to fit over cushion foam of size 530x560x100mm, in tapestry cloth as approved (not less than Rs. 250/- per meter) having one side long chain with double interlocking complete all as shown on drawings, as specified and as directed Note: Reference drawing FD-281

STEEL FURNITURE

M&L for carrying out repair and replacement of the following under-mentioned parts of almirah medium with shelves by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1032

Leg 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

Shutter (single leaf) made out of 1.00mm thick MS sheet of existing size

Chromium plated handle 100mm long as per existing pattern and design

Locking device

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

Cleat made out of 1.00mm thick MS sheet of suitable size as per existing for fixing of shelves

Shelves made out of 1mm thick PBI sheet as per existing

M&L for carrying out repair and replacement of the following under-mentioned parts of almirah large with shelves by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1031

Leg 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

Shutter (single leaf) made out of 1.00mm thick MS sheet of existing size

Chromium plated handle 150mm long as per existing pattern and design

Locking device

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

Cleat made out of 1.00mm thick MS sheet of suitable size as per existing for fixing of shelves

Shelves made out of 1mm thick PBI sheet as per existing

M&L for carrying out repair and replacement of the following under-mentioned parts of almirah of size 1900x910x490mm by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

Suitable lock 4 lever with 3 sets of keys

CP handle 100mm long of approved design

M&L for carrying out repair and replacement of the following under-mentioned parts of book case by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1028

3mm thick glass pane for fixing in sliding shutter

Chromium plated handle of approved design and type

Lock 3 way of existing pattern, 4 lever with cover and set of duplicate keys

Shelves made out of 1mm thick PBI sheet as per existing

S&F top of charpoy IP with hard top with 12mm thick plywood BWR grade, commercial, conforming to IS 303-1989 complete all as specified and as directed Note: Reference drawing FD/MAP-II/01

M&L for carrying out repair and replacement of the following under-mentioned parts of charpoy GI pipe with plytop by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-220

S&F GI tubing 32mm bore, medium grade as in long / short rails of charpoys including necessary cutting to length and shape required, duly threading, etc. complete all as shown on drawing , as specified and as directed

S&F GI elbow 3 way, medium grade, suitable for 32mm bore GI tubing complete all as shown on drawing, as specified and as directed

S&F GI check nut, medium grade, suitable for 32mm bore GI tubing complete all as shown on drawing, as specified and as directed

M&L for cutting into size and shape required, threading, etc. defective long rails retrieved hereinabove and converting into short rails of GI charpoys complete all as shown on drawing, as specified and as directed

M&L for cutting into size and shape required, threading, etc. defective short rails retrieved hereinabove and converting into legs of GI charpoys complete all as shown on drawing, as specified and as directed

S&F stiffeners / clamps of MS flat iron 25x5mm to GI charpoys including welding, etc. as required complete all as shown on drawing, as specified and as directed

S&F plywood top, 12mm thick, commercial 7 ply, BWR grade, conforming to IS:303-1989, with 3Nos. MS flat iron 25x5mm stiffeners in cross-sectional direction, drilling holes in plywood for suitably bolting in stiffeners with GI pipe charpoy frame, including suitable nuts, bolts and washers (10Nos.) including tightening of GI frame charpoy complete all as shown on drawing, as specified and as directed

M&L for carrying out repair and replacement of the following under-mentioned parts of chair verandah by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-256

Repairs to damaged chair frame / back frame by cutting and welding not exceeding 20cm long

S&F hard rubber shoe round shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely two coats of synthetic enamel paint (white colour) over a coat of red oxide zinc chrome primer

M&L for removing existing old worn out nylon cane and reweaving with new 4mm thick oval shaped nylon cane of approved quality, in Godrej pattern and off white/cream colour

S&F stiffner made out of MS rod 10mm dia, 460mm long

M&L for carrying out repair and replacement of the following under-mentioned parts of chair visitor with cushioned back, seat and hand rest by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

S&F back rest

S&F arm rest

M&L for carrying out repair and replacement of the following under-mentioned parts of chair writing with hand rest, back rest and cushion seat by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

S&F cushioned seat

S&F arm rest

M&L for carrying out repair and replacement of the following under-mentioned parts of table writing of size 900x610x760mm with PLPB top by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly polished including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

S&F locks suitable for drawers as approved

S&F RHS frame

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining sunmica top by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-165(M)

Leg / frame 25mm MS square tube upto 100cm long

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

Table top of size 1900x685mm made out of 18/19mm thick pre-laminated particle board (one side decorated face and other side balancing white)

M&L for carrying out repair and replacement of the following under-mentioned parts of table dining aluminium top by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-165(M)

Leg / frame 25mm MS square tube upto 100cm long

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

Table top of size 1900x685mm made out of 18/19mm thick MDF board duly covered with 1mm thick aluminium sheet with plastic / PVC beading all round

M&L for carrying out repair and replacement of pre-laminated partical board of size 1800x750x900mm with 4mm thick wood edging allround of table dining of size 1800x750x900mm made of RHS frame with PLPB top by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

M&L for carrying out repair and replacement of the following under-mentioned parts of table office clerk by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-84(M), FD-1004

Chromium plated 'D' type handle 125mm

S&F suitable drawer / shutter lock with duplicate keys of approved type and design

S&F drawers of table made out of 1mm thick PBI sheet over all size of drawer 350x430mm & 410mm deep duly painted with a coat of pink primer

S&F side of drawer made out of 1.00mm thick PBI sheet, with angle channel and locking device duly painted with a coat of pink primer

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

S&F top of table made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of table office officer by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-84(M), FD-1003

Chromium plated 'D' type handle 125mm

S&F suitable drawer / shutter lock with duplicate keys of approved type and design

S&F drawers of table made out of 1mm thick PBI sheet over all size of drawer 300x500mm & 100mm deep duly painted with a coat of pink primer

S&F side of drawer made out of 1.00mm thick PBI sheet, with angle channel and locking device duly painted with a coat of pink primer

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers to MS pipes (set of 4Nos)

S&F top of table made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around top and bottom side of the top shall be painted with a coat of white primer

M&L for carrying out repair and replacement of the following under-mentioned parts of MS shoe rack of size 900x300x750mm with tiers by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

Repair to frame with proper size of MS angle iron including welding

Repair to shelves made out of 3.15mm MS sheet including welding and nuts & bolts as required

M&L for carrying out repair and replacement of the following under-mentioned parts of rack 6 tier / rack 6 tier adjustable by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-106(M), FD-1038

Repair to frame with proper size of MS angle iron length not execeding 10cm including welding

S&F top, bottom and shelves with 1mm thick PBI sheet duly painted with a coat of pink primer

M&L for carrying out repair and replacement of the following under-mentioned parts of chair revolving with cushioned back cushion seat, by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing TP

S&Fseat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425x400mm with cushion duly covered in rexine cloth as approved fixed on plywood seat

S&F back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400x300mm with cushion duly covered in rexine cloth as approved fixed on plywood seat

S&F suitable castor wheel pedestal as per existing size and shape

S&F leg base as per existing

M&L for carrying out repair and replacement of the following under-mentioned parts of table bed side by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD/E6/MAP/15(R)

S&F top made of 18/19mm thick pre-laminated particle board with wooden beading allround

S&F bottom made of 18/19mm thick pre-laminated particle board

S&F side made of 18/19mm thick pre-laminated particle board with wooden beading

S&F CP handle 100mm long suitable for drawers

Steel telescopic channel of size 25x450mm suitable for drawers (fixed at the center of drawers)

Top side (above back ply) made of 18/19mm thick pre-laminated particle board

Back made of 6mm thick plywood BWR grade

Top drawer made of 18/19mm thick pre-laminated particle board at front and 12mm thick plywood allround

Bottom drawer made of 18/19mm thick pre-laminated particle board at front and 12mm thick plywood allround

S&F hard rubber shoe square shaped with flat top of existing size as in stoppers (set of 4Nos)

M&L for carrying out repair and replacement of the following under-mentioned parts of locker bed side by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape duly powder coated / painted as per existing including re-assembling as under complete all as as specified and as directed Note: Reference drawing FD-1029

S&F legs base 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

S&F shutter (single leaf) made out of 1.00mm thick PBI sheet of exiting size

S&F chromium plated MS handle 100mm long as per existing pattern and design

S&F CP mild steel hasp and staple of size 150mm

S&F shelves made out of 1.00mm thick PBI sheet of size 485x920mm as per existing

20mm bore steel conduit pipe of existing size

Removing old existing paint by scrapping and rubbing with sand paper and smoothening surfaces and applying one coat of synthetic enamel paint (of approved tint) for the following as shown on drawings, as specified and as directed

Almirah medium steel with shelves (FD-1032)

Almirah large steel with shelves (FD-1031)

Table dining sunmica / alumunium top [FD-165(M)]

Table office clerk steel [FD-84(M), FD-1004]

Table office officer steel [FD-84(M), FD-1003]

Locker steel (FD-1029)

Rack steel 6 tier / rack adjustable steel 6 tier [FD-106(M), FD-1038]

Table bed side [FD/E6/MAP/15(R)]

Charpoy IP with hard top (FD/MAP-II/01)

KIRAN REED INDUSTRIES

M/S R A ENTERPRISE