Loading
Loading…
Loading…
Tender Value
₹4.0 Cr
EMD Value
₹8.1 L
Closing Date
29 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
ENGG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Civil Engineering Work / Zonal maintenance works.
21 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
HYB Division: Annual repairs/maintenance of quarters and service buildings under the Jurisdiction of SSE/W/GOC and SSE/W/CKL of ADEN/Estates-II/HYB for a period of one year (2026-2027)
68_DRM_W_HYB_26
68_DRM_W_HYB_26
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹8.1 L
29 Jun 2026
4 Jun 2026
15 Jun 2026
43 items across 1 schedule · ₹48,79,757.26 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Natural (nature) art Painting on Walls with "CHERIYAL" scroll painting depicting the series of Telangana folk tradition confined to the village Habitment by CHERIYAL. Artists using bright and bold colours at Railway Premises above 4.0 m and upto 8.0 m height with all contractor's artists, helpers, colours, tools and plants etc. as per required and as directed by the engineer-in-charge including GST. | Sqm | 100.00 | 1,936.8 | 1,93,680 |
| 2 | Supplying and fixing premium quality Waste coupling of size 32mm with 125mm / 1 3 0 mm length of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge with all contractors transportation, materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 30.00 | 912 | 27,360 |
| 3 | Supplying, Providing and Fixing o f Sliding Glass doors o f 12mm thick toughened glass w ith all e d g e s completely polished w i t h cut outs to accommodate Rollers, locks and handles, with all required fittings Similar to SL-44-A2-Kit (Make OZONE) Consists o f OZ-SL- 44-A2-Rollers for 80Kg=2Nos,Stopper OZ-SL-44-A3=2pcs, Floor Guide OSL-33_G =1pcs and Top Track similar to Model No.Track- OZ-SL-44-B1 of OZONE make, Sliding Door Lock similar to Model No. OSSPL- SDL-111- G S T D S S S o f OZONE make complete with all material, labour, tools and transportation, lead ,lift and taxes if any as per the approved drawing and as per instruction of Engineer-in- Charge at site. | Sqm | 10.00 | 23,261 | 2,32,610 |
| 4 | Supplying, stitching a n d fixing imported Zebra blinds curtains w i t h similar m a k e like VSM, Model matrix, code no.MZBB-092 in double layer ,withall necessary equipment for operating the curtain blinds up and down complete w i t h all contractor's l a b o u r , materials, tools, plants, scaffolding, transportation, lead and lift, taxes if any as per the instructions of engineer-incharge at site. | Sqm | 80.00 | 7,910 | 6,32,800 |
| 5 | Supplying and fixing premium quality Pillar Cock extended body size 310mm / 3 2 0 m m and aerator of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge, with all contractors transportation ,materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 45.00 | 4,626 | 2,08,170 |
| 6 | Supplying and fixing premium quality 32mm Bottle trap with connection of size 150mm / 190 mm / 250 mm of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge with all contractors transportation ,materials, tools, adhesive, labour, lead, lift, taxes etc completed and as per the instructions of engineer in charge at site. | Each | 15.00 | 2,290 | 34,350 |
| 7 | Supplying and fixing premium quality Towel Rail Ends Pair with 60cm SS Rod of standard make: Parryware / Johnson / Hindware / Jaquar as d e s i r e d b y E n g i n e e r i n c h a r g e w i t h all contractors transportation ,materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 50.00 | 718 | 35,900 |
| 8 | Supplying, Providing and fixing Paneling to all round the door on wall and door frame / shutter of desired size using 12mm thick PLY MR grade of make similar to Gurjan duly treating the ply wood surfaces with approved a n t i Termite treatment a n d externally covering with 4mm thick Teak wood veneer and Flush door of 30mm thick with teak wood lipping o n a l l edges and finished with 4 m m thick Teak wood veneer on both sides. The door shall be provided with handle with Premium Mortise l o c k similar to G o d r e j m a k e , M o d e l Alpine Product Code 7720.and d o o r closer similar t o godrej make, Model similar to Product code-1938 and Stainless Steel Tower Bolt of Size 250x10mm and stain Less steel Door Stopper including repairing the existing Door Frame by filling the depressions with paste of Fevicol and Saw dust and covering the grove with teak wood lipping. All the Veneered surfaces of frame and shutter to b e polished with Melamine polish etc., with all contractors material, labour, tools and transportation, lead ,lift and taxes i f any a s per the instruction of Engineer-in-Charge at site. | Sqm | 10.00 | 15,787 | 1,57,870 |
| 9 | Supplying and fixing premium quality Table top Wash Basin of size 485X370X110 mm or desired s i z e , c o l o u r S n o w W h i t e of standard make: Parryware / Johnson / Hindware/ Jaquar as desired by Engineer in charge with all contractors transportation, materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 10.00 | 8,866 | 88,660 |
| 10 | Supplying and fixing looking mirror 6mm thick with polished beveled edges fixed on stainless steel studs with all contractors men, materials, tools and plants, all lead and lift, taxes etc., including scaffolding and as directed by the Engineer-in-charge at site. | Sqm | 50.00 | 2,688 | 1,34,400 |
| 11 | Supply, errection and commissioning of hot pressed moulded thermosetting glass Fibre reinforced polyester resin (GRP) sectional water storage tanks confirming to IS 14399 (Part - I & II) on Railways existing staging/roof top including all accessories like external bracing, L brackets, manhole & drain panel assembly etc., including providing and fixing required fittings for inlet, outlet/delivery, drain and outflow pipes with all contractors labour, tools and plants, material, all lead & lift taxes complete for tanks of height 1M- For a capacity Upto 10,000 Litres | Litre | 10000.00 | 34.38 | 3,43,800 |
| 12 | Providing and fixing 'L' shape toilet cubicle comprising of Divider panel and door shutter side panel of required size/width/height according to site measurements with 12mm thick High pressure laminate board of make Green Lam/Merino or Similar approved brand of monolithic homogeneous material of compact laminate board with solid phenolic board of decorative panels manufactured by simultaneous pressing of layers of Cellular fiber material impregnated with thermo setting resins and specially pre-treated craft paper subjected to both pressure and heat, including SS legs of height 100mm form floor level , Aluminium "U'section at corners, 'L' section at end/'H' section at middle and Aluminium round Shape tube of top rail with all contractors fittings like SS screws, wall plugs, SS gravity hinges 3 nos, SS door knobs two side operation, SS lock set with indicator, SS Coat hook with Door topper etc, labour, material, tools &plants, all lead & lift, transportation, wastage etcas per the specifications and instructions of Engineer in charge at site. | Sqm | 60.00 | 12,120 | 7,27,200 |
| 13 | Providing and fixing of Divider panel shutter of required size/width/height according to site measurements with 12mm thick High pressure laminate board of make Green Lam/Merino or Similar approved brand of monolithic homogeneous material of compact laminate board with solid phenolic board of decorative panels manufactured by simultaneous pressing of layers of Cellular fiber material impregnated with thermo setting resins and specially pre- treated craft papersubjected to both pressure and heat, including SS legs of height 100mm form floor level , Aluminium "U'section at corners, 'L' section at end / 'H' section at middle and Aluminium round Shape tube of top rail with all contractors fittings like SS screws wall plugs, etc, labour, material, tools & plants, all lead & lift, transportation, wastage etc as per the specifications and instructions of Engineer in charge at site. | Sqm | 31.00 | 11,095 | 3,43,945 |
| 14 | Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing arrangement and making necessary holes etc. for fixing required Ozone or similar SS fittings, all complete as per direction of Engineer-in- charge. | Sqm | 20.00 | 5,400 | 1,08,000 |
| 15 | Providing and fixing Roller Cloth blinds of approved brand / make/ size with imported Fabric and aluminium Roller tube of suitable size with side brackets and all accessorics as per the desired pattern with all contractor's, materials, tools, adhesive, labour, lead & litt, transportation, scaffolding & taxes if any and as per the instructions of Engneer in charge at site. | Sqm | 50.00 | 2,364 | 1,18,200 |
| 16 | Supplying and fixing premium quality Coat hook of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge with all contractors transportation ,materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site.: Hooks - 4 nos. | Each | 70.00 | 544 | 38,080 |
| 17 | Supplying and fixing premium quality Coat hook of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge with all contractors transportation ,materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site.: Hooks - 6 nos. | Each | 70.00 | 612 | 42,840 |
| 18 | Hiring of Suction cum jetting sewerage cleaning machine of 6000 to 10000 ltrs capacity including the cost of fuel,drivers,operators,water for suction etc., complete as per instructions of Engineer-in- charge.Payment shall be made for actual working hours at site. | Hour | 60.00 | 2,245.24 | 1,34,714.4 |
| 19 | Development of Architectural drawings for elevation of Buildings and layouts for space planning as per approved railway plans/ drawings, furnishing specifications, design for interior/Exterior arrangements including color scheme in the rooms and land scaping wherever required for any new/existing buildings and providing hard copies of drawings as required with all contractor's labour, material, tools, plants, stationery, transportation, taxes etc., and as directed by Engineer-in-charge. | Sqm | 300.00 | 560.4 | 1,68,120 |
| 20 | "Providing PU Polishing on Teakwood or Veneer Surface containing all carved design/plain surface for doors & windows panels,doors & windows frames,wardrobes,TV Panels,Pelmets Fills etc.,to the approved shades as desired by Engineer-in-charge either glossy finishing/Matty finishing by preparing the wood/veneer surface duly scrapping with sand paper, applying liquid yellow oxide to cover cracks,scratches,holes and applying putty made of wood saw powder and fevicol towards filling of cracks/holes etc., to get a smooth surface,applying PU polish (Minimum two coats) to get the desired glossy/matty finish with final coat applied with Spraying Compressor Machine. Protecting the adjacent Surfaces by Sticking Plastic Covers to avoid damage and same to be removed after Polishing work is completed including Men,Material,tools and Machinary Complete as per directions of Engineer In-charge. Note :- Mode of measurment towards payment will be surface Area. If width of any wooden/venner componenet is less than one feet (i.e 0.305M) it can be treated as one feet towards measurement of area of that component instead of measuring the same in ""RM""." | Sqm | 50.00 | 1,871.51 | 93,575.5 |
| 21 | Finishing walls with Royale play/Impressions or similar Metallic water based special effects textured paint with different type of special effects such as crinkle, dapple, weaving, canvas, spatula, color wash, ragging, sponging, combing, brushing, etc., can be created by using suitable tools in multiple shades as per directions of Engineer-in-charge at site. | Sqm | 200.00 | 612.46 | 1,22,492 |
| 22 | Providing and fixing Soap Dish Holder (ACN- 1131N) | Each | 50.00 | 756.43 | 37,821.5 |
| 23 | Providing and fixing Towel ring (ACN - 1121BN) Round with Round flange | Each | 10.00 | 974.11 | 9,741.1 |
| 24 | Providing & fixing soap dispensor with glass bottle (ACN-1135N) | Each | 10.00 | 1,440.86 | 14,408.6 |
| 25 | Providing and fixing white vitreous sensor operated Gents Urinal having pre & post flushing with water having water inlet from back side, including fixing of control plate (made of stainless-steel sensor) to wall with suitable brackets all as per manufacturers specifaction and direction of Engineer-in-charge. | Each | 4.00 | 27,890 | 1,11,560 |
| 26 | Supply of 12mm Saint gobin or equivalent crystal-clear glass of required size for partition. | Square Foot | 90.00 | 275 | 24,750 |
| 27 | Charges for making 12mm froasted for privacy/durability / safety purpose and installation charges of 12mm glass including cutting, bending, edge finishing with all fittings and fixing. | Square Foot | 50.00 | 190 | 9,500 |
| 28 | Supply of F.P.S. bricks class designation 5.0 etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | 1000 Nos. | 15000.00 | 4,746.77 | 71,201.55 |
| 29 | Supply of Fly proof SS wire mesh grade 304 0.50mm etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 400.00 | 290.86 | 1,16,344 |
| 30 | Supply of UV stabilised 2mm thick plain/corrugated GFRP sheet etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 75.00 | 523.54 | 39,265.5 |
| 31 | Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 75mm dia etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Metre | 250.00 | 81.44 | 20,360 |
| 32 | Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 110mm dia etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Metre | 250.00 | 151.25 | 37,812.5 |
| 33 | Supply of Miscellaneous UPVC fittings etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 53.00 | 232.68 | 12,332.04 |
| 34 | Supply of Polyvinyl chloride sheet 400 micron thick etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 22.00 | 52.35 | 1,151.7 |
| 35 | "Supply of Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 30.00 | 349.03 | 10,470.9 |
| 36 | Supply of Stone Aggregate (Single size) : 10 mm nominal size with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | cum | 31.00 | 1,761.34 | 54,601.54 |
| 37 | Supply of Plastic acrylic emulsion paint with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Litre | 400.00 | 232.68 | 93,072 |
| 38 | Supply of Water proofing cement paint / snowcem with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 380.00 | 44.21 | 16,799.8 |
| 39 | Supply of Enamel paint including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site. | Litre | 250.00 | 191.96 | 47,990 |
| 40 | Supply of Portland Cement (OPC-43 grade) including all contractor's labour, lead and lift, taxes and including stacking at desired location as per the directions of Engineer in charge at site. | MT | 11.00 | 5,986.65 | 65,853.15 |
| 41 | Supply of white cement from reputed manufactures including all contractor's labour, lead and lift, taxes and including stacking at desired location as per the directions of Engineer in charge at site. | MT | 0.15 | 13,199.88 | 1,979.98 |
| 42 | Supply of fine sand(Zone IV) including all contractor's labour, lead and lift, taxes and including stacking at desired location as per the directions of Engineer in charge at site. | cum | 40.00 | 1,237.8 | 49,512 |
| 43 | Hiring of JCB/Hitachi for levelling and dressing ground/dismantling structures ,Removal of jungle, clearing of earth, lowering high cess etc., along side the track between up and down lines obstructing drainages of rain water, clearing of bushes obstructing visibility at curves and Level Crossings with all lead and lift etc. complete and as directed by the Engineer-in-charge .All labour, tools and plants consumables stores including supply of JCB/Hitachi with crew to be provided by the contractor at his own cost. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site. | Hour | 45.00 | 1,032.5 | 46,462.5 |
| Schedule total | ₹48,79,757.26 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditionsforGOCandCKLSignedCopy_rotated.pdf
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
GCC2022_compressed.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf Approved brand
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .