PROVISION OF TOILET BLOCK NEAR BLDG NO 3 C1 OF 12 JAKLI AND PROVN OF 29 X 25 LTRS CAPACITY WATER HEATER GEYSER FOR BATHROOM AND 29 X EXHAUST FAN FOR KITCHEN ROOM FOR JCOS/OR MD ACCN AT NEW MD LINE GOLCONDA UNDER GE GOLCONDA

Amount

Surface excavation n.exc 30cm deep and averagng 15cm deep and getting out Soft/loose soil. , etc, complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/Dense soil complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified.

M&L reinforced cement concrete M25 Grade, Design mix, (using 20mm graded stone aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed.

M&L reinforced cement concrete M25 Grade, Design mix, (20mm graded stone aggregate ) Columns, pillars, piers,posts and struts etc complete all as specified and as directed.

M&L reinforced cement concrete M25 Grade, Design mix, (using 20mm graded stone aggregate ) use in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.

M&L reinforced cement concrete M25 Grade, Design mix, (using 20mm graded stone aggregate ) as in beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and as directed.

M&L reinforced cement concrete M25 Grade, Design mix, (20mm graded stone aggreagte) as in Chajjas etc complete all as specified and as directed.

Formwork to sides of concrete foundations, rough finished surfaces of flat concrete, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,etc complete all as specified and directed.

Formwork to rough finished surfaces of concrete,square, rectangular or polygonal, sides of pillars, posts, struts, piers, columns and stanchions,etc complete all as specified and directed.

Formwork to rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

Formwork to rough finished surfaces of flat concrete,soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as specified and as directed.

Formwork to rough finished surfaces of flat concrete, chullah hoods, chajjas,troughs and similar items including edges,etc complete all as specified and as directed.

Formwork to rough finished surfaces of concrete, edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,etc complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length, bent to shape required including bending ,cranking and hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

All as per item no 17 above but 6 to 8mm dia

M&L for 25 mm thick Damp proof course in cement concrete 1:2:4 Type B-0 (Using 12.5mm crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

M & L brick work with fly ash bricks built in CM 1:6 straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed.

M & L brick work with fly ash bricks built in 1:4 with Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in etc complete all as specified and as directed.

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and fair (without using extra cement) complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1 : 6 and finished even and smooth without using extra cementcomplete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for two coats of cement based paint over a coat of cement primer on newly plastered surfaces of walls including preperation complete all as specified and as directed.

M & L for three coat of white wash on new surface of wall including preparation complete all as specified and directed.

M&L for 3 coats of white wash on newly plastered ceiling surfaces including preperation complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base complete all as specified and as directed.

M&L for 20 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles complete all as specified and as directed.

M&L for 10mm thick in CM 1:4 rendering/backing coat for skirting/dado on brick or concrete surfaces rough finished complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified and as directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc.complete all as specified and as directed.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and as directed.

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and as directed.

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised ccomplete all as specified and as directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S & F Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including P or S trap set in and including concrete complete all as specified and as directed.

S & F in repair Vitreous China wash down water closet pan(pedestal pattern) white ( including 'P' or 'S' trap connection to drain) or out going pipe and to flushing pipe anti syphonic pipe complete all as specified and as directed.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in complete all as specified and as directed.

S&F Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete as directed complete all as specified and as directed.

S&F 32mm Dia Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid for wash hand basin waste pipe complete all as specified and as directed.

Supply and fix wash hand basin Vitreous china white ovel type size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F 32mm Dia Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid for urinal waste pipe complete all as specified and as directed.

S&F 2150mm x 600mm mirro with 6 mm thick plywood backing and powder coated aluminium framing complete all as specified and as directed.

S & F tubular towel rail 20mm dia brass chromium plated D type 60cm between two flangecomplete all as specified and as directed.

Supply and fix 15 mm swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mmbore complete all as specified and as directed.

Supply and fixed 15 mm bore Bib taps, brass chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) double layer hoisted and fixed in position all as specified in SSR Part I of capacity 1000 litres complete all as specified and as directed.

S&F GI Tube, ‘Medium grade’ galvanised, with all fittings and fixed comp to walls and ceilings or laid in floors of 15 mm bore complete all as specified and as directed.

S&F GI Tube, ‘Medium grade’ galvanised, with all fittings and fixed comp to walls and ceilings or laid in floors of 20 mm bore complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore, complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends with acess door any radius 75mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F for Grating round 75 mm size of CP etc complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore, complete all as specified and as directed.

S&F PVC (SWR) junction single, (SingleT), equal or unequal, with acess door 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, bore of pipe in 110 mm, etc complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S & F for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., size of frame 125 x 60 mm complete all as specified and as directed.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S & F for for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded, etc complete all as specified and as directed.

S & F for for Steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed,complete all as specified and as directed.

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for two coats of Synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or grith exc 10 cm including preperation of surfaces complete all as specified and directed.

S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.

M&L priming plastered roof surfaces with bituminous primer @ 0.3 Kg/sqm as per IS-3384 and providing water proofing treatment by applying mineral finish 3.5 Kg/sqm actatic poly propylene (advanced App torch membrane with fiber glass and finished on top with fiber glass mineral states torch incistern of thickness 3 mm by torch bonding complete over and including rendering 10 mm thick in CM 1:4 on concrete surfaces of roofs parapet etc, finishing to surfaces even and smooth with out using extra cement and providing necessary slope incl using WPC @ 3% or as per manufacturer instructions, ccomplete all as specified and as directed.

Surface excavation n.exc 30cm deep and averging 15 Cm and getting out in hard/dence soil Complete all as specified and directed.

M&L PCC ,1:3:6 type C1 (using 20mm graded stone aggregate) as in side of path , finish even & smooth without using extra cement complete all as specified and as directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cememnt and pigment including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Excavation over areas, n exc 1.5m deep and getting out in any type of soil, complete all as specified and as directed.

All as per item No 83 above but exc 1.5M but n. exc 3.0 M depth, complete all as specified and as directed.

All as per item No 83 above but exc 3.0M but n. exc 4.5 M depth, complete all as specified and as directed.

All as per item No 83 above but exc 4.5M but n. exc 6.0 M depth, complete all as specified and as directed.

M & L PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed.

M & L for brick work with subclass “B” Old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete all as specified and as directed.

M & L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundations, including rafts,footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:4 on soffits of slab complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:3 on fair face of walls surface fair finished even & smooth without using extra cement with water proofing compound (water proofing compound will be measured and paid seperately) complete all as specified and as directed.

Supply only Broken brick coarse aggregate/bats exc. 63 mm size complete all as specified and as directed.

Supply only Integral water proofing compound,complete all as specified and as directed.

M&L for Providing precast ce- ment concrete type B1 using 20 mm graded stone aggregate set in Cm 1:4 as in , landings, cover slabs (for man holes etc.) chullah hoods,Baffle wall chajjas,water troughs,mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

M&L for Cast iron work grade FG 150, unmachined, in brackets, gully traps,gratings, railing, frames,manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops,parts of ranges, balusters and similar articles.each article exc. 5.0 Kg, complete all as specified and as directed.

M&L for sand cast 100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls, complete all as specified and as directed.

S&F cast iron 100 mm dia Cowl, ccomplete all as specified and as directed.

M & L Plain cement concrete1:3:6 type C2 (using 40mm graded stone aggregate) as in concrete bed to 200 mm drain pipes including forming cradles in, including demolition of exisiting concrete, complete all as specified and as directed.

M&L for Reinforced concrete pipes 200 mm dia class NP2 laid in trenches , jointed, pointed in CM (1:1) and tested complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in copings,haunching, kneelers, apex stones, bed plates and manhole kerbs and like rounded or chamfered where required complete all as specified and as directed.

M & L for providing point wiring with 3 runs of 1.5 sq. mm single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable, 1100 vols grade in and including non metallic rigid PVC conduit medium grade with appropriate size with all fittings concealed in wall including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators etc. complete for :- one light controlled by one switch, complete all as specified and as directed.

All as per Sl item No. 103 but for one exhaust fan controlled by one switch, complete all as specified and as directed.

All as per Sl item No. 103 but fo one 3 pin socket 6 Amp on independent board, complete all as specified and as directed.

Supply and fix Modular switch, single pole, one way, 6 Amps one module complete, complete all as specified and as directed.

Supply and fix Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais all as specified and directed at site complete all as specified and as directed.

S&F LED tube light fittings 1 x 20 W, 230V, complete with all accessories internally prewired and including LED Tube rod connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size ccomplete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, suitable bracket alongwith clamps and nut and bolts with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

S&F Sheet metal enclosure MCB distribution board double door including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, complete all as specified and as directed.

S & F RCBO double pole, 240 Volts, AC 32 Amps complete all as specified and as directed.

S & F MCB single pole 240 Volts, 6 to 32 amps complete all as specified and as directed.

M & L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead all as specified and directed at site.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundation, laying of pipes/cables in trenches and getting out in hard/dense soil complete all as specified and as directed.

Supply & fixing galvanized steel water tubing medium grade complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc complete of size 50mm dia, complete all as specified and as directed.

All as per item No 118 above but of size 25mm dia, complete all as specified and as directed.

S&F gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 50mm dia, complete all as specified and as directed.

S&F gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of size 25mm dia, complete all as specified and as directed.

M & L for construction of valve chamber 60x60x60 cm inner dimensions, brick masonary in cm 1:4 PCC base in 1:3:6 of 7.5 cm thick & plastering 15 cm thick in CM 1:4 in inner side/ coping of all chamber fabrication of Iron frame 20x20x6 mm size angle iron MS cover 3 mm thick with hinges and locking arrangements duly painted including excavation,earth work complete all as specified and as directed.

Cutting/Boring on the existing CI/GI pipe line 40/40mm dia (in position) for insertion of new galvanised Tee 40 x 25 mm for branch connection incl necessary jointing material complete all as specified and as directed.

Supply and lay in trenches/fixed to walls/poles etc and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with aluminium conductor of 2 Core 10 Sqmm complete all as specified and directed. Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.

Supply and spreading river sand in trenches for cables cushioning on top and bottom of cables all as specified. Note :- Punned thickness shall be measured and paid, complete all as specified and as directed.

M&L brick protection with common burnt bricks sub class ‘B’ for cable protection complete all as specified and as directed.

Supply and laying 40mm bore GI tubing, light grade, with all fittings for cable protection at road crossing / on poles complete all as specified and as directed.

S&F electric water heater, storage type steel body with porcelain enamel inner tank and heating element upto 2 KW capacity of 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., and 04 No's grouting bolts, nuts & washers grouted on stone wall and making good the distributed groute surface complete all as specified and as directed.

Supply and fix exhaust fan 240V, 300mm Sweep, metalic body complete with all fixing arrangement at site. (Note: Cost for cutting holes and making good the disturbed surfaces shall be deemed to be included the quoted rate.), complete all as specified and as directed.

M&L Point wiring for one exhaust fan point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick,masonary walls,roof etc including in new /old CI/MS sunk box of required size and all as directed by Engineer-in-Charge & 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, including making good the disturbed surfaces to match with the existing specification complete all as specified and as directed.

M&L point wiring for one 3 pin 15/16 Amps switch socket outlet point on independent board with 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi strand flexible cable and 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone/brick, masonary walls, roof ets., including new CI/MS sunken box of required size and all asdirected by Engineer-in-Charge & 3mm thick plastic laminated sheet for housing switches sockets, regulatots etc., including cutting/running chases, pinning in and making good the distributed surfaces to match with the existing specifications, complete all as specified and as directed.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and as directed.

S&F Socket Outlet 3 pin 15 Amps flush type complete all as specified and as directed.

S&F Switch piano one way 15 Amps flush type complete all as specified and as directed.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe size of 15mm dia connect between geysers inlet PVC water and inlet GI pipe 15mm dia line including necessary plumbing works, civil works complete all as specified and as directed.

S&F bib tap chromium plated, cast copper alloy with crutch or butterfly handle, screwed for iron pipe size of 15mm dia connect to outlet GI pipe line including necessary plumbing works, civil works complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

M&L Submain wiring with 2 runs of 4 sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multistranded, copper conductor cables (FRLS quality) drawn through newly laid PVC casing capping/conduit, fixed on walls /ceiling including 4 sqmm PVC insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete all as specified and directed at site. Note: (i) Two runs of cable and one run of earth wire shall be measured as one run length, (ii) Earth wire shall run inside the same casing capping/conduit, (iii) Cost of PVC casing capping/conduit deemed to be incl in the quoted rate.

Sukhdevraj Sharma Engineers & Contractors Pvt Ltd (BID ID -3458961)

harshraj and co (BID ID -3458152)

S.R.M.K Enterprises (BID ID -3465019)