REPAIRS TO ROOF, PLASTERING, WALL PANELLING AND MISC WORK ATLGJ MIL STN

Amount

Dismantling asbestos cement (corrugated / semi corrugated) sheets including ridges as in roof covering complete all as specified & directed by Engineer-in-Charge.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.

M&L for Brickwork with fly ash bricks, Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified & directed by Engineer-in- charge.

Taking down cement plaster from brick wall or concrete surfaces or ceiling including raking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed

M&L rendering 10 mm thick cement plaster on brick walls or concrete, surface in CM 1:6 and surface to be finished even smooth without using extra cement complete all as specified & directed

M&L for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 and finished fair and even including mixing of WPC in mortar complete all as directed. Note : WPC shall be measured and paid seperately.

Supply only integrated water proofing compound complete all as directed by Engr-in-charge.

M&L preparing new plastered or pointed surface of wall and applying two coats of acrylic distemper on walls over a coat of primer complete all as specified & directed

M&L for preparation of new plastered or pointed surface of walls and applying two coats of cement base paint complete all as specified & directed

M&L for three coats of white wash on newly plastered surfaces of wall incl preparation etc. complete all as specified & directed

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified & directed

S&F mineral fibre accoustical suspended ceiling system with ANF (Micro look) EGE tiles with silhouette exposed grid. Colour shall lbe white, fire performance class 0/class 1 (BS 476) in module size of 600mm x 600mm x 15mm with bioblock coating on the face of tiles. Suitable for green building application with recycle content of 63%. The tiles shall be laid on silhouette profile grid system with 15mm with flanges incorporating 6mm central revel in white / black colour and with a web height of 45mm and and load carrying capacity of minimum 15.68 kg/Sqm. Silhouette, main runner and cross runner shall have mitred end and birdsmouth notches to provides mitred juction. The Tee section have a galvanised of 125 gms/Sqm complete all as specified and directed by Engr-in-Charge. Make : ARM STRONG, AEROLITE, HUNTER DOUGLAS

S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm dia pipe complete all as specified and directed. Note: Minimum weight 20 mm - 210 gms

Taking up or down steel tubing 15mm bore including all fittings and connections, cleaning for refixing or removal to store complete all as specified and directed

,---ditto--- all as per serail item No. 16 above but for 20mm dia pipe complete all as specified and directed

,---ditto--- all as per serail item No. 16 above but for 25mm dia pipe complete all as specified and directed

S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling/ laid in floor complete all as specified and directed.

,---ditto--- all as per serail item No. 19 above but for 20mm dia pipe complete all as specified and directed

,---ditto--- all as per serail item No. 19 above but for 25mm dia pipe complete all as specified and directed

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise specially provided complete all as specified and directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

M&L preparation of new steel surfaces over 10cm in width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repairs Vitreous China urinals, half style (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F in reapirs Wash basins, Vitreous China (flat back or angle back type) size 550x400 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S & F in repairs 10 ltr capicity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets for fixing complete all as specified and directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding complete all as specified and directed.

S&F in repair pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed. Note: Wt not less than 450 gms

S&F pillar tap, fancy type, cast copper alloy chromium plated with capston head, screwed down high pressure with or without lettered with long screwed shank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed. Note: Wt not less than 450 gms

S&F in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair tubular towel rail, Brass chromium plated 20 mm dia, 'D' type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP brass stop/angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repair, shower rose, 125 mm size, brass chromium plated with sweivel joint complete all as specified and as directed by Engineer-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid over cement screed base laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry mixed with pigment to match shade of the slab including rubbing and plishing complete all as directed.

M&L Machined pressed precast concrete interlocking paver block glossy with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade over 50mm thick silver sand cushion and incl dismantling all as specified and directed. Note : (Sand will be measured and paid seperatly)

Suply only fine aggregate (sand) for Cushioning (silver sand) complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base below floors all specified and directed.

Taking down existing shutter and refixing in same opening shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each all as specified and directed. (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)

Taking down Wall panelling and similar work, any description, fixed in any position complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all specified and directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

POOJA CONSTRUCTION COMPANY

Dashmesh Construction Company

ram rattan dass aggarwal

PAREEK AND COMPANY

SHIVA CONSTRUCTION COMPANY

M/s R.N Construction Co.

M/s Karan Builders

GOYAL ENTERPRISES

SHRI GANESH CONSTRUCTION CO.

KHANNA CONSTRUCTIONS