PROVISION OF TOILET BLOCK NEAR OR LIVING LINE AT ANCEPTA BRICHGUNJ MILITARY STATION

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in soft/loose soil, complete all as specified and as directed.

All as per serial item no 2 above but exc 1.5m deep 7 n.exc. 3m deep complete all as specified and as directed.

Excavation over areas n.exc. 1.5m deep and getting out in soft /looose soil complete all as specified and directed.

Excavation over areas exc. 1.5m deep and n. exc 3.00m and getting out in soft /looose soil complete all as specified and directed.

Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed.

M & L for RCC- M - 30 Design Mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed

M & L for RCC- M -30 Design Mix as in columns, pillars, piers,posts and struts complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in,shelves and the likeall complete all as specified and directed.

M & L for Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tobatterfor Fair finished surfaces complete all as specified and directed..

M & L for Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M & L for Use and waste of form work to sides and sofit of Beams for Fair finished surfaces complete all as specified and directed..

M & L for Use and waste of form work to sides and sofit of Roof Slab & Chajja etc for Fair finished surfaces complete all as specified and directed..

TMT bars 10 mm dia and over cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed.

TMT bars 6 mm to 8mm dia cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed.

All as per serial item no 17.00 here-in-before but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders and the like complete all as specified and directed.

M&L Rendering 10mm thick on concrete surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified and directed..

M & L for rendering 5 mm thick in CM I:3 on for ceiling surfaces, finished even and smooth without using extra cement etc complete all as specified and directed.

M&L Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement using 2% of WPC complete all as specified and directed. Note:- WPC shallmeasured and paid seperately.

M&L Rendering 15mm thick on concrete surfaces such as Roof Top slab etc in CM (1:3) finished even & smooth without using extra cement.including using 2% of WPC complete all as specified and directed.

Supply only Water Proofing Compound.

M&L Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over chalk whiting including primer as specified and directed.

All as per serial item no 24.00 here-in-before but on Ceiling surfaces complete all as specified and directed.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed..

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Spreading and levelling in layears n. exc 25cm thick and well ramming including watering all as specified and directed

Removal excavated material to a distance not exceeding 50 M and depositing where directed at a level n. exc. 1.5 m above starting point as in soils complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 100mm thick as in sub base complete all as specified and directed..

M&L 25mm thick cement concrete type B-0 (12.5mm graded stone aggregate) as in RCC roof / Floor surface wfor level coarse complete all as specified and directed.

M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surfce complete all as specified and directed..

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate of 75mm thick as in Plinth Protection complete all as specified and directed..

M & L Chequered cement concrete tiles, with grey cement and pigment 30cm x30cm x20mm thick set, jointed and pointed in neat cement slurrry in floors including 15mm thick screed bed in Cm 1:4 all as specified and directed.

M&L Coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc,set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over 20mm thick screed bed in CM (1:6) complete all as specified and directed..

M&L Glazed Ceramic Coloured tiles 300 x200x 7mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match all as specified and directed including backing coat 10mm thic in CM 1:6 complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm wooden grain printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening complete all as specified and directed..

S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded wooden grain printed PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading complete all as specified and directed..

S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and directed.

S&F 200mm Aluminium anodised barrel tower bolts of extruded sectionscomplete all as specified and directed..

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified and directed..

S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete .

S&L of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors complete all as specified.(a) Outer diameter of pipe in 20 mm complete all as specified and directed.

All as per serial item no 44.00 here-in-before but Outer diameter of pipe in 25 mm.

S & F 1000 litres capacity Rotational moulded polythene water storage tanks triple Layers (cylindrical vertical with closed top) hoisted in position all as specified in SSR Part I

S&F 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed..

S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge.

S&F looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer -in- charge..

S&F Gun Metal Gate valves 20 mm dia with iron wheel head screwed both ends for iron pipes complete all as specified and directed..

S&F Chromium Plated Steel Grating of 100mm size complete all as specified and directed..

S&F vitreous china wash down water closet pan ( Padestal Pattern) white including connection to trap including flushing pipe, seat cover anti syphonase pipe etc complete all as specified and directed..

S&F PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets all as specified & directed by Engineer-in-charge.

S&F Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) all as specified & directed by Engineer-in-charge.

S&F Health faucet I metre long with PVC tube with wall hook complete all as specified & directed by Engineer-in-charge. (Make:- Jaquar Cat No ALD -CHR-593 or equivalent of cera /Marc)

S&F two -way Bib cock brass complete all as specified and as directed by Engineer-in-Charge.(Make Jaquar Cat part No ARI 39041 or equivalent of cera /Marc)

S&F vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F PVC flexible connections 15 mm dia 450 mm long with brass checknuts complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm CI Floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia outlet PVC (SWR) floor trap,plain with grating incl joining with solvent cement complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) Gully 125/110 mm,seting and incl joining with solvent cement complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls and laid in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bend with oval access door complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) bend with oval access door complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) cowls 75mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) cowls 110mm dia complete all as specified and as directed by Engineer-in-Charge.

M&L for Concrete bed to drain pipes including packing under, and completely surrounding pipes with concrete after they are laid and tested in cement conrete 1:3:6 type C-2 around 110mm dia complete all as specified and directed..

M&L for precast man holes cover slab with 1:2:4 type B1 using 20mm graded stone aggregate set in CM 1:4 incl cost of use and waste of clean sawn wooden form work but excl cost of reinforcement all as specified.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in surface channel / benching incl cost of use and waste of clean sawn wooden form work all as specified

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-ted/stoped ends etc

M&L in repairs water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane of minimum wt. 3.50 kg/sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) laid by torch application as per the manufacturers instructions with side overlap of 100mm & end overlap of 150mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete all as specified and as directed.

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

M&L for 12 mm thick prelaminated particle board to fixed in repair interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work.

M & L for point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade in and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc including 1.5 sqmm. green PVC insulated wire for earth continuty.complete all as specified and as directed by Engineer-in-Charge (a) One light point/Exhaust fan controlled by one way switch

Supply and fix of switch piano flush type single pole one way 5 Amp all as specified and directed.

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fix energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

S&F Street light New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs 25 w as light and electronic driver complete all as per with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.

Supply and fix exhaust fan suitable for on working of AC 230 V ,50 Hz 300 mm sweep 1400 RPM,with heavy duty motor ,incl louvers complete all as specified

Supply and fix in repair metal enclosure distribution board SPN, 4 way 240 volts, with 100 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as as specified and as directed by Engineer-in-Charge

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

7.M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 sq mm complete all as specified and directed.

Supply and filling pulverized stone dust to the full width of trenches for protection of cables including sperading and punning down including watering consolidation complete all as specified and directed.

Supplying and laying unreinforced precast cement concrete cable cover Class LV, Type I, flat, size 250mm x 150mmx40mm in trenches for cable protection embossed with Electric on the top surface complete all as specified and directed.

Supply and fix 25 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and directed.

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

M&L for cutting existing 50mm GI line and making branch connection of 40 mm dia GI line complete all as specified and directed.

Supply and fix 25 mm bore Gun Metal gate valve with iron wheel head ISI Marked screwed both ends suitable for GI tubing complete all as specifed and directed.

Island Agency

NAVJEEVAN ENTERPRISES

Allied Trading Company

bansal construction

P M BUILDERS

M/s Pooja Enterprises