Nagercoil Corporation Construction of a Modern Integrated Bus Terminal at Nagercoil City Municipal Corporation with Operation and Maintenance for the period of 5 years

Construction of Modern Integrated Bus Terminal

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Dismantling RCC using deploying machineries-(PWD SOR P.NO :2025-2026 W-0035)

Brick Masonry in cement mortar walls under 3m (PWD SOR 2025-2026-W-0015

AC Sheet Roofing without roof timbers (PWD SOR P.NO :2025-2026 W-0025)

Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the departmental officers.

Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth.

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement. W-0075

Supplying and providing Anti termite pre construction treatment using aldrin or dealdrin or heptochlor as per relavent IS 6313 (part II) code including cost of all materials, labour, hore charges for T&P etc complete.

Damp proof course as per IS 3067:1988 with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality Integral liquid water proofing compound conforming to Indian Standard specification as specified by the de-partmental officers at 2% by weight of cement used , finishing and curing etc. complete complying with standard specification - Manual Mixing

Supplying and filling in foundation, basement, etc with filling crushed stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means

Centering For Below Plinth Level Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Centering For Beam upto 3.60m Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Centering For Beam above 3.60m upto 4.90m Supplying and erecting centering for plane surfaces such as RCC Floor/Roof beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting above 3.60m upto 4.90m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m (expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2.40 x 3.0m (expandable upto 4.90m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c and with Cross bracings provided at two levels at a spacing of 1.80m etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Centering For Slab above 3.60m Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Centering For Slab above 3.60m upto 4.90m Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting above 3.60m upto 4.90m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2.40m x 3.00m (expandable upto 4.90m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) with Cross bracings provided at two levels at a spacing of 1.80m ,etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers (Payment for centering shall be given after the concrete is laid).

Wall centering Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 2.10 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton and as directed by the departmental Officers(Payment for centering shall be given after the concrete is laid)

Column centering Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

M-20 CONCRETE - Providing and laying in position, standarised design mix M-20 Grade using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 320Kg/m3 ( cement grade shall be 53) and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.70 cu.m.)940.50Kg of 20mm machine crushed stone jelly and with about (2.80 cu.m.)462.00Kg of 10-12mm machine crushed jelly and with about (4.25 cu.m.)701.25Kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor/roof slabs wherever neccessary without clambing extra, etc. complete complying with standard specification and as directed by the departmental officers. the coarse and fine aggregates to be used should comply with the requierments of IS 383-2016. (No separate payment will be made by the department for the exces usage of materials as per design mix.) Foundation For Compound Wall

Ground Floor For Compound Wall

For Sump

Providing and laying in position, Standardised Concrete Mix M-30 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). For Foundation & Basement

For Ground floor

For First floor

For Second floor

For Third floor

For Fourth floor/Terrace Floor

Vibrated reinforced concrete M25 (Design mix) using 20mm ISSHBG graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but formwork and centering soft water labour charge for mixing, transpoting, place in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants including all other all other incidental charges etc., complete as per standard specification for CC Pavement

Installation of Vertical Bored cast in situ RCC piles of following diameter in all types of soils, using Standardised Concrete Mix of following grade, with sulphate resistant Cement or OPC/PPC, etc and Crushed Stone Sand and 20mm and down graded HBGS jelly coarse aggregate. The rate includes cost for placing of reinforcement cage in bore hole in correct position, cost of boring to the required depth with Bentonite solution with temprory casing of required length, conveyance of RMC to site and pouring concrete using Tremine pipes, conveyance of all materials to the site including all tools and plants, shifting the plants and equipments from one point to another, excavtion of mud pits for circulation of Bentonite soultion, closing the mud pits to original level and mud removal with initial lead and lift but including dismantling the concrete above the cut off level etc complete as directed by the departmental officers including socketing. The reinforcement cage should be welded properly for lifting. The concrete cubes to be tested as per IS 456-2000. Acceptance criteria by clause 16.1. Frequency of testing as per 15.2.2. Testing to be conducted at both the ends at site as well as RMC plant. Pile driving depth should be decided by the departmental officers at site. The length of pile for payment shall be measured from top of shoe to the bottom of the pile cap.( Cost of Reinforcement provided for Pile and Welding charges shall be measured and Paid separately )

Initial pile Load test (excluding pile cost) (Design load) HW - W0068

Routine Pile load Test (Design Load) HW -W0069

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Add additional labour for works above plinth/Basement level in every upper floor over the preceding floor or Below Ground level of every 3.50m depth.

Underground structures waterproofing with HDPE membrane - Providing and laying water proofing treatment to the Rafts, Below grade slab, Lift pits, water retaining structures with fully bonded 1.5 mm thick HDPE waterproofing pressure sensitive adhesive membrane over PCC before laying raft concrete having higher puncture resistance of 1000N as per ASTM E 154, confirming to BS 8102 & IS 16471:2017, requirements of UG waterproofing structures. Laying adjacent sheets by keeping overlap of 75mm, end overlaps to be treated using double sided tape. The membrane shall have Tensile strength >25 Mpa as per ASTM D 412, Elongation > 500% as per ASTM D 412, Hydrostatic head resistance >70m head of water as per ASTM D 5385, Low Temperature Flexibility: -25 deg C, Peel Adhesion to Concrete >880 N/m as per ASTM D 903 Modified, UV Exposure > 45 Days. The finished cost including surface preparation completely as per specification. W-0314

Brick work in following Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. In Cement Mortar 1:5 For foundation & basement

In Ground floor

In First floor

In Second floor

In Third floor

Supplying and Fixing of Fully Panelled Doors - External or Internal Moulded Planks Single Leaf 1000 X 2100 Type ‘A’ - (5 Panels) Etc, Complete Complying With Standard Specification and as Directed by the Departmental officers.- For Single Leaf shutter

FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers M-0394

Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1800mm x 1400mm with following specification: a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW c. Shutter Thickness: 46mm d. Honeycomb: In-fill e. Glue Macroplast UR-7221 f. Door Hinges: 4 x 3 x 3mm, Double Ball: Ball bearing Butt Hinges Grade SS 304 - Finish SS g. Door Closer with Standard Arm Finish: Silver h. Lock Set: Dead Lock with both side key i. Door Orientation: To be confirmed by client j. Mounting of door: Brick wall mounted k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns l. Single Point Panic Bar (2 Horizontal) m. Dead Lock with both side key n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass with Frame o. Rated Glass with Frame p. Anchor Bolt with EndcapsThe above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, pastering, scaffolding all other conveyence as per standard methods and as directed by the Departmental Officers. M-0775

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work M-0674

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work. M-0675

Supplying and Fixing of Panelled and Glazed Doors -Double Leaf 1500 X 2100 - Type ‘B’ - (Two Unequal Panels) Etc, Complete Complying With Standard Specification and as Directed by the Departmental officers.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc ROLLING SHUTTERS (WITH ISI MONOGRAM) Manually Operated (up to 8 sqm. Area) M-0401

Flooring with ceramic tiles of following size Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Granite Stone Slabs of following size and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 and above 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by the departmental officers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Granite Nosing for Steps/Platform of full round with smooth finishing including cost of labour, machinery etc., complete. M-0246

Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) Dadooing with white glazed tiles of size 150mm x 150mm x 6mm

Flooring with Cuddapah slab of 50mm thick,over a bed of concrete 100mm thick and pointed with Cement Mortar (1:3)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers.

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Three coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete M-0651

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. 75 mm thick slab (using 20mm HBGS Jelly)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand ) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Supplying and laying of Interlocking Paver Block Stone 63mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non- absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed by the departmental officers.

Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed by the departmental officers.

WATER SUPPLY AND SANITARY ARRANGEMENTS Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of neceSORy PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers - 110mm dia PVC Pipe

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. - 110mm dia PVC pipe

90mm dia PVC pipe

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 1000 litres WD-M1418

Supplying, laying and jointing G.I. Pipes of approved quality and best variety of "B" class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with necessary brick work / concrete and plastering wherever necessry with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works. Above ground level. - 20 mm dia G.I Pipe

25 mm dia G.I Pipe

32 mm dia G.I Pipe

40 mm dia G.I Pipe

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. - Gun Metal Gate Valve - 20mm Gun metal Gate Valve

25 mm Gun metal Gate Valve

32 mm Gun metal Gate Valve

40 mm Gun metal Gate Valve

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) - SD Tap

Pillar Tap

Supplying and fixing in position the following GI Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of GI pipes, jointing the GI specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The GI specials should be got approved by the Executive Engineer concerned before use on works.) - GI Union - 20 mm dia GI Union M-0444

25 mm dia GI Union M-0443

32 mm dia GI Union M-0442

GI Elbow - 20 mm dia GI Elbow M-0450

25 mm dia GI Elbow M-0449

32 mm dia GI Elbow M-0448

GI Bend - 20 mm dia GI Bend M-0456

25 mm dia GI Bend M-0455

32 mm dia GI Bend M-0454

GI Tee - 20 mm dia GI Tee M-0462

25 mm dia GI Tee M-0461

32 mm dia GI Tee M-0460

GI Coupling - 20 mm dia GI Coupling M-0468

25 mm dia GI Coupling M-0467

32 mm dia GI Coupling M-0466

GI Reducer - 20 x 15 mm dia GI Reducer M-0474

25 x 20 mm dia GI Reducer M-0473

32 x 25 mm dia GI Reducer M-0472

GI Reducer Elbow - 20 x 15 mm dia GI Reducer Elbow M-0481

25 x 20 mm dia GI Reducer Elbow M-0480

32 x 25 mm dia GI Reducer Elbow M-0479

GI Reducer Tee - 20 x 15 mm dia GI Reducer Tee M-0488

25 x 20 mm dia GI Reducer Tee M-0487

32 x 25 mm dia GI Reducer Tee M-0486

GI Hex Nipple - 20 mm dia GI Hex Nipple M-0495

25 mm dia GI Hex Nipple M-0494

32 mm dia GI Hex Nipple M-0493

Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting, and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3(2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply - above ground level.- Internal Water Supply Arrangements using PVC pipes and PVC specials - 20mm dia

25 mm dia

External Water Supply Arrangements using PVC pipes and PVC specials - 25 mm dia

32 mm dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements - Coupler - 25 mm Dia PVC Coupler M-0882

32 mm Dia PVC Coupler M-0883

40 mm Dia PVC Coupler M-0884

Elbow - 25 mm Dia PVC Elbow M-0888

32 mm Dia PVC Elbow M-0889

40 mm Dia PVC Elbow M-0890

BEND - 25 mm Dia PVC BEND M-0894

32 mm Dia PVC BEND M-0895

40 mm Dia PVC BEND M-0896

Tee - 25 mm Dia PVC TEE M-0900

32 mm Dia PVC TEE M-0901

40 mm Dia PVC TEE M-0902

End Cap - 25 mm Dia PVC END CAP M-0906

32 mm Dia PVC END CAP M-0907

40 mm Dia PVC END CAP M-0908

Reducer - 25 mm x 20 mm PVC Reducer M-0911

32 mm x 25 mm PVC Reducer M-0912

40 mm x 32 mm PVC Reducer M-0913

Reducer Tee - 25 mm x 20 mm PVC Reducer Tee M-0916

32 mm x 25 mm PVC Reducer Tee M-0917

40 mm x 32 mm PVC Reducer Tee M-0918

Reducer Elbow - 25 mm x 20 mm PVC Reducer Elbow M-0921

32 mm x 25 mm PVC Reducer Elbow M-0922

40 mm x 32 mm PVC Reducer Elbow M-0923

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). - PVC Elbow - 160mm dia PVC Elbow M-0942

110mm dia PVC Elbow M-0941

75mm dia PVC Elbow M-0939

PVC Elbow with Door - 160mm dia PVC Elbow with Door M-0946

110mm dia PVC Elbow with Door M-0945

75mm dia PVC Elbow with Door M-0943

PVC Tee - 160mm dia PVC Tee M-0950

110mm dia PVC Tee M-0949

75mm dia PVC Tee M-0947

PVC Tee with Single Door - 160mm dia PVC Tee with Single Door M-0954

110mm dia PVC Tee with Single Door M-0953

75mm dia PVC Tee with Single Door M-0951

PVC Tee with Double Door - 160mm dia PVC Tee with Double Door M-0958

110mm dia PVC Tee with Double Door M-0957

75mm dia PVC Tee with Double Door M-0956

PVC Bend - 160mm dia PVC Bend M-0962

110mm dia PVC Bend M-0961

75mm dia PVC Bend M-0959

PVC "Y" - 160mm dia PVC "Y" M-0966

110mm dia PVC "Y" M-0965

75mm dia PVC "Y" M-0963

PVC "Y" with Single Door - 160mm dia PVC "Y" with Single Door M-0970

110mm dia PVC "Y" with Single Door M-0969

75mm dia PVC "Y" with Single Door M-0967

PVC "Y" with Double Door - 160mm dia PVC "Y" with Double Door M-0974

110mm dia PVC "Y" with Double Door M-0973

75mm dia PVC "Y" with Double Door M-0971

Supplying and fixing in position PVC 4 way junction plain or with door of various dia of best approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).- PVC Double Tee with Single Door (4 way junction) - 160mm dia PVC Double Tee with Single Door

110mm dia PVC Double Tee with Single Door

75mm dia PVC Double Tee with Single Door

PVC Double "Y" with Single Door (4 way junction) - 160mm dia PVC Double "Y" with Single Door

110mm dia PVC Double "Y" with Single Door

75mm dia PVC Double "Y" with Single Door

PVC Cowl - 110mm dia PVC Cowl

50mm dia PVC Cowl

75mm dia PVC Cowl

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). White Wash Hand Basin Without Pedestal

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 5.5mm thick mirror of followingsize , Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and redoing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting M-0647 - White EWC M-0647

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) - White glazed earthernwere lipped mouth flat back urinal

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) - Nahani Trap of size 100 x 75mm with stainless steel gratings

Supplying and fixing in position 150 x 100mm “P” or “S” stoneware gully trap ‘A’ grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three crushed stone sandand Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying, laying and position best quality Indian cast iron soil / waste pipes of following dia of approved brand and quality conforming to BIS and providing leak proof joints with spun yarn and making connection to all sanitary fittings with required number of special, clamps, cement and spun yarn, dismantling the masonry / RCC wherever necessary and making good the dismanlted portion to the original condition including painting the cast iron pipes and fittings with two coats of anti corrosive paint of approved quality and colour and the pipes fixed in postion in true alignment, etc., complete complying with standard specifications (The CI pipes shall be got approved by the Executive Engineer before use on work) - 150mm

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 9” x 43/8” x 23/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. - Inspection chamber - 0.45 x 0.45m ( inside opening ) Upto 1m height

Inspection chamber - 0.60 x 0.60m ( inside opening ) Upto 1m height

Providing rain water harvesting using 6 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 6mm dia MS rod vertically and 3 No. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects.

ELECTRICAL WORKS - HT WORKS - HT RMG Panel - Supply, Installation, Testing and Commissioning of11 KV, 25 KA, 630 A, HT Outdoor Three Panel Ring Main Gear etc., complete complying as directed by the departmental officers as per standard specification. M-1958

HT Panel - Supply, Installation, Testing and Commissioning of11 KV, 25 KA, 630 A, HT Outdoor Single Panel Vaccum Circuit Breaker complete as per specification etc., complete complying as directed by the departmental officers as per standard specification. M-1953

HT Transformer - Supply, Installation, Testing and Commissioning of 250 KVA, 11 KV / 433 V Outdoor Oil Cooled Transformer with off Circuit (As per IS 1180-Level 2) (SOR-M-1937)

Supply, Laying of 185 sq.mm. 3 core HT XLPE 11KV UG cable with necessary aluminium cable sockets by crimping with electrical connection complete etc., complete complying as directed by the departmental officers as per standard specification.. M-1959

Supply, Termination of 120-185 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3111 cable with necessary connection complete. etc., complete complying as directed by the departmental officers as per standard specification. M-1965

Supply and Clamping of Same as SD 198, except 3-1/2 x 240 sq.mm. PVC LTUG armoured cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. SD -213

Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC armoured LTUG cable with earth connection SD -172

Supply and providing cableend termination of 3-1/2x185sq.mm.PVCLTUGaluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete SD-230

Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work SD -222

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI Pipe of dia not less than 40mm, with copper earth plate of size 600mm x 600mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

DISTRIBUTION BOARDS & MCB - Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one No 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in Each segment) and seperate provision for MCB / Isolators ( totally 12 Nos) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with Earth connection only. SD-630

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door) with 1 No 160 A 4 P MCCB as incoming and 6 Nos 63A 3P MCB , 6 Nos 6A to 32A SP MCB as outgoing with suitable cable end box on wall with Earth connection only. Higher End SD 621

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End SD-522

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End SD-520

Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door ) with 1 No 250 A 4 P MCCB as incoming and 3 Nos63A 3P MCB , 3 Nos 6A -32A SP MCB as outgoing with suitable cable end box on wall with Earth connection only. Higher End SD 610

CABLES - Supply and Laying of 3 1/2 x 300 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 677

Supply and Laying of 3 1/2 x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 676

Supply and Laying of 3 1/2 x 150 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 674

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 673

Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 672

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 671

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 670

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 668

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 667

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD 666

GLANDS - Supply and fixing of brass cable gland for 3-1/2 x 300 sq.mm. PVC armoured LTUG cable with earth connection SD 173

Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC armoured LTUG cable with earth connection SD 172

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection SD 170

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection SD 169

Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC armoured LTUG cable with earth connection SD 168

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection SD 167

Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection SD 166

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection SD 164

END TERMINATION - Supply and providing cable end termination of 3-1/2x185sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete SD 230

Supply and providing cable end termination of 3-1/2x150 sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete SD 229

Supply and providing cable end termination of 33-1/2x120 sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete SD 228

Supply and providing cable end termination of 31/2C x 95sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. SD 227

Supply and providing cable end termination of 31/2C x 70sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. SD 226

Supply and providing cable end termination of 3-1/2x50 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 3-1/2x25 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. SD 223

WIRING - Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End SD 235

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Stair case Light point Lower End SD-304

CIRCUIT MAINS - Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour SD-333

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq mm copper wire with painting of suitable colour SD-336

SWITCHES & SOCKETS - Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End SD 402

Supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End SD-404

Supply and fixing of 16A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with earth connection only SD 146

Supply and fixing of 16A Switch 1W - 1 Module M-1420

Supply and fixing of 16A Switch 2W - 1 Module M-1421

Supply and fixing of 16A Switch 1W with Indicator - 1 Module M-1422

Supply and fixing of 16A 3 Pin Switched Socket - 3 Module M-1523

Supply and fixing of MCB ISOLATORS - HIGHER END 32A - DP M-1829

Supply and fixing of MCB ISOLATORS - HIGHER END 32A - TP M-1830

Supply and fixing of MCB ISOLATORS - HIGHER END 40A - TP M-1833

Supply and fixing of MCB ISOLATORS - HIGHER END 100A - TP M-1838

LIGHT FITTINGS - Supply and fixing of 20W, 4FT LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 15 Watts LED Round Type Surface mounted Down Light on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting M-3021

Supply and fixing of 24W LED Round Type Surface mounted downlight on false Ceiling from ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting. M-3023

Supply and fixing of 24W LED Round Type Surface mounted down light M-3022

Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. M-1284

Supply and fixing of Mirror Light 20W LED Batten to the fitting and to complete necessary accessories and etc to complete the work. M-2703

Supply and fixing of 120W LED Street Light Fitting with LED to complete necessary accessories and etc to complete the work. M-1293

Supply and fixing of LED Flood Light 100W with Integrated Driver to complete necessary accessories and etc to complete the work. M-1300

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting SD 443

Supply, installation, testing and commissioning of Multi Sensor - Heat Cum Smoke detector M-2410

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb SD-83

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD-467

Supply and fixing of 450mm (18") sweep(lightduty) ACexhaust fan complete with necessary wall opening and making good of the wall SD-118

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Lower end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour . SD-466

Supply and Instalatin for 1 PHASE UPS (Single Phase In & Single Phase Out) CAPACITY - SYSTEM WITH BATTERY - 2 HOURS BACK-UP M-2109

Supply and run of 25mmx6mm tinned copper flat with necessary clamps/supports on wall / floor/ground for earth connection SD 77

Supply and run of 2of6sq.mm.(84/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains SD 71

Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which10metres of total length compressed in to acoil of one meter length(75mmto100mmdia)connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth SD 78

CABLE TRAY - The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements. The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc,(8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement) - Supply and Laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height M-1644

Supply and Laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height M-1645

Supply and fixng of TNEB meter board suitable for 3phas e200A service connection madeup of suitable angle iron frame work of size 3feetx2feet using angle iron of size1-1/2"x1-1/2"x1/4"rigidly fixed on wall covered with hylem sheetof size 3feetx2feet of 12mm thickness with necessary bolt sand nuts support sand supply and fixing of 3Nos.200Afuse units (500V),1No.neutral link,copper earth flat of size1"x1/4" with in terconnection of EBmeter to fuse units by 19/16 PVC insulated copper wire with earth connection complete SD 134

Supply, Installation, Testing and Commissioning of 20 KWP Solar on grid photo voltaic power plant conforming to MNRE specificaations as amended, consisting 38 Nos of 535 WP Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing mounted on Aluminium/ MS structure of suitable strength. Solar on grid panel shall have the size of 2.28 x 1.14 x 19 nos x 2 sides so as to enable to produce minimum of solar energy 20 KWP as specified above with all accessories etc., complete HW- W0055

Supplying and erectingof Minimast (12 Metre) with 6 Nos. 150W LED Fitting Tower Polygonal Shapes. Suitable for 12 luminaries for Wind Speed up to 180 Km/hr. As per IS -875 Parts -3 Material Cons.: BSEN 10025 # Mechanical Components including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries and C.G Box Mtg. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.etc. ( Each Set ) # Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts and Bolts. # Cable with termination & distribution box. # Foundation Accessories. # Winch Assembly # Power tool. Mast bottom Dia:415 mm. Top : 150 mm, Thk: 4,3,3 mm. Motor-1.Feeder pillar box comprising 100 ams fuse unit 24 hours timer 1-No and contactor 1-No outgoing MCB toggle switch and neutral link with internal wiring made of MS sheet and vermin proof.Erection and commissioning of 20 Mtr high mast on the above said concrete foundation using suitable equipments. Fixing of flood light luminaries in the lantern carriage including internal wiring & using flexible copper cable complete. M-2137

Supply and erection of 10 persons carrying capacity of passenger lift of car inner size 1300 X 1350mm for Basement + Three Floors (4 Floors) (ie) 20m travel height with a speed of 1.00Mtr per First with ARD , the entrance will be on front side only and 3 No of Entrances on each floor, without machine room and gear less operation and the lift well size is 2150 X 1850mm and with 1 No of Circular fan, LED Light fittings. The landing entrance opening with sliding Door and made up of Stainless Steel SS 304 Grade Hairline finish. The Lift make will be of Johnson / Kone / OTIS / Equivalent. - Lift Capacity 10 Persons M-2366

Goods lift Capacity 1000 kg M-2380

Suplying,Laying 6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm)76.10mm OD x 3.65mm Thick x 6000mm Length M-2118

Suplying,Laying and commisioning of 4 of 16 sq.mm PVC U.G Armoured cable of as per standard specification SD 204

Escalator Heavy duty, Reversible, PLC/ microprocessor based controller, VVVF drive with 0.5 m/ sec speed, 30- 35 Deg inclination, tread depth ≥ 40cm height ≤ 22 cm , width 1 mtr and 3.6 mtrs height with Handrails made of Polyuerthane, Handrail frame of Hairline (finished stainless steel), Deck cover of Hairline (finished stainless steel), In- terior panel-Balustrade of TYPE-P (Stainless steel), Skirt Guard of Hairline (finished stainless steel), Step tread of Stainless steel with synthetic Resin Demarcation (Yellow), Floor plate Comb. of Synthetic Resin (Yellow), Landing plate of Aluminium including all necessary safety devices & accessories, comb light shall be mounted on the skirt guard with 1m center to center arrangement and complete in all respects.

CCTV CAMERA - Supply fixing and errection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification - 5MP Varifocal Motorized Dome IP Camera ,30m IR, Micro SD Slot, IP66 M-2810

5MP IP Bullet / Dome Camera with SD card Support. M-2807

RACK WITH ACCESSORIES - HIGHER END - 36U Rack M-2229

80-Ch IP NVR Input, resolution up to 12MP, Dual RJ45 port, 8 SATA(up to 10TB), 2 HDMI&VGA, 2USB, Alarm I/O M-2815

CAT 6A Modular 24 Port Patch Panel fully loaded M-2804

CAT 6A UTP Armoured Cable

10 KVA single phase Servo stabilizer. M-3086

Heavy Duty speaker/LED TV Stand.

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.

PA System - Supply, Installation,Testing & commisioning of Wall Speaker 30W M-2153

Supply, Installation,Testing & commisioning of PA Booster Amplifier 480W M-2151

Supply, fixing & Testing of Chairman Unit M-2146

Supply, Installation,Testing Conference Controller M-2148

Supplying and fixing 2 Core 1.5 sq.mm Shielded Copper Speaker Wire M-2158

Supplying and fixing 8 Core 1.5 sq.mm PVC Copper Conference C cable M-2159

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cumPurifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. M-0721

BORE WELL - Towards cost of Geophysical investigation survey charges.

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site including construction of mud pit. - Reaming 140/150mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer.- Up to 60m depth WD-W0783

From 60m to 90m depth WD-W0784

Supply and delivery of unplasticised ribbed screen PVC casing pipe of the 150mm dia with screwed and socket end and centering guide for every 15m length of pipes as per IS / 12818 / 92 and as amended from time to time to suit the borewell upto 150m depth (C.M) Casing medium with ISI marking including, loading, unloading, freight, stacking and transit insurance charges etc, complete. WD-M0028

Supply and delivery of unplasticised ribbed screen PVC casing pipe of the 150mm dia with screwed and socket end and centering guide for every 15m length of pipes as per IS / 12818 / 92 and as amended from time to time to suit the borewell upto 30m depth (R.S) Ribbed Screen Pipe with ISI marking including, loading, unloading, freight, stacking and transit insurance charges etc, complete. WD-M0029

Supply and delivery of 160mm dia(8”) PVC end cap including cost and conveyance etc., complete WD-M0115

Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete 165 mm/168 mm dia PVC Casing pipes Assembly WD-W0838

Charges for developing the bore wells with Air Compressor 600cfm (Minimum 8 hours) including transportation labor and fuel charges for Compressor as directed by the Departmental Officer and conducting yield test by “V” notch method. WD-W0833

Supply and delivery of THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 100MM DIA BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pump suitable for 100mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS 9283 /1995 and as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 % (350Lpm x 75 m head) - 5HP Submersible motor(350x75)WD-M1690

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ (± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). WD-M1912 - 5 HP Panel board

Supply and Delivery of 2.5 Sqmm PVC insulated and Sheathed 3 Core flat type copper cable confirming to IS 694/1990 Including all charges with excise duty and handling charges etc WD-M1974

Towards Labour Charges for the errection of Submersible pump set in bore well including fixing and jointing submersible cable with proper clamps up to the starter to riser pipes to the required depth valves erection clamps, pressure gauge up to the exterior of panel board consisting of TPICN switches starter ,Volt meter, Ammeter, three pilot (indicating) Lamps capacitor single Phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., Complete and testing the pump set and trail run for 10 days WD-W0872 - motor errection 5HP

Supply and delivery of 110 mmmm dia HDPE PIPES - PE 100 AS PER IS 4984/1995 PN 16 with excise duty including cost & conveyance of all materials to site and all labour charges etc., complete WD-M0188 - 110 mm HDPE Pipe

HVAC SYSTEM - Supply,Installation, testing and commissioning of VRV/VRF Indoor air conditioning units with direct driven fan, high efficient filter, inbuilt microprocessor thermostat, electronic expansion valve, provision of fresh air duct connection, wired PID remote controller, drain pump, necessary ceiling supports & vibration isolators, refrigerant charging, oil charging,Refnet joints, control wiring and drain connection, etc. The fan power consumption of VRF Indoor units should Not exceed 0.0006 bhp/cfm for ductable units and 0.0004 bhp/cfm for cassette units as per specification. The capacities are as mentioned below:- VARIABLE REFRIGERANT FLOW (VRF) AIRCONDITIONING SYSTEM Inverter Scroll Compressor Modular VRF ODU 34.0 HP M-2022

Supply, installation, testing & commissioning of Double skin construction draw thru type ceiling suspended AIR HANDLING UNITS with Electronic expansion kit with 25 mm thick Sandwitched PUF insulation panel as per specification & as indicated in the Equipment Schedule. Each complete with DIDW Forward Curved Centrifugal Fan , filter sections, DX coil of copper tube & Hydrophillic (Blue) coated aluminium fins. The fan motor should squirrel cage induction motor, centrifugal fan direct driven / Belt-driven with spring type vibration isolators, Limit switches,Emergency Light, Guard for inspection door, Prefilter (MERV8) & bag filter (MERV 13), drive sets, SS insulated drain pan etc., Motor shall be suitable for 220/415 volts, 50 Hz, 1/3 Ph AC supply. - Supply & Installation of factory made DX Ceiling Suspended Ductable split package units complete with Double Skin AHUs Ceiling Mounted 4400 Cfm 11 TR M-2675

Supply & Installation of factory made Split A.C 4 Way Cassette Inverter 2 TR M-2655

SUPPLY, INSTALLATION, TESTING, COMMISSIONING AND HANDING OVER OF AIR-COOLED SELF CONTAINED DUCTABLE AC UNITS - 5.5 TR Ceiling Supsended Ductable Unit M-1993

8.5 TR Ceiling Supsended Ductable Unit M-1994

Supply and installation of of Hard drawn Refrigerant copper piping, fittings with suitable closed cell nitrile rubber insulation covering with FRP tape as a resistant to Scratch & Mechanical Impact. The pipe sizes and insulation thickness as follows. - Gas line 1 1/8" copper with 28.60 mm thick insulation M-2049

Liquid line 5/8" copper pipe with 15.90mm thick insulation M- 2052

Supply and providing of pipeline nitrle rubber insulation for Refrigerant and drain pipe lines. M- 2013

Supply and laying of cabling between indoor and outdoor units. The rate shall be including suitable size Heavy duty PVC conduit with conduit accessories and necessary fixing arrangement. - 10 core 2.5 sq.mm. armoured copper cable M-0825

Supply and erection of the following Heavy Duty PVC Drain pipe with all joints, reducer, necessary elbows and tees, supporting arrangements and Nitrile rubber insulation with 9mm thickness etc.- 32 mm dia M-2010

Supply, installation, testing and balancing of Air Distribution System consists of factory fabricated sheet metal ducting complete with supports (anchor fasteners and tie-rods, cradles, angle iron supports, GI bolts and nuts, 4mm thick self-adhesive neoprene rubber gasket, stiffeners, zinc chromate painted angle iron flanges, chipping and plastering of openings made for duct supports etc., complete as per specification. The rates quoted shall include turning vanes, straightening vanes, splitters, inspection doors probe, inlets with test openings enclosures complete with locking caps, chain, gaskets, Gripple/OBO make wire ropes etc. - Supply, Fabrication and erection of fabricated ducting made up of GI sheets of 20 Gauge thickness. M-2008

Supply, Fabrication and erection of fabricated ducting made up of GI sheets of 22 Gauge thickness. M-2007

Supply, Fabrication and erection of fabricated ducting made up of GI Sheets of 24 Gauge thickness M-2006

Supply and fixing of extruded aluminum powder coated, Supply and return Air Grilles / Diffusers with Volume Control Damper M-2009

Supply and providing acoustic for initial portion of ducting with 12mm thick Fibre Glass Rigid Board covered with Tissue Paper and Aluminum Perforated Sheet. M-2015

Supply and providing thermal insulation of 9mm thick vidoflex with Aluminum Foil. M-2016

Supply and fixing of Duct Mouth Dampers. M-2014

Supply and installation of Fire Retardant Canvass connections with GI matching flanges on both sides with a provision of openable zip. The entire assembly shall be factory fabricated. M-2004.

Design, Supply and erection of steel supports like MS plate, angles, channels, etc. Rate shall inclusive of cutting, welding, grinding, fixing accessories and one coat of primer & one coats of enamel paints, etc. as required for Outdoor unit M- 2012

Design, Supply and erection of steel supports like MS plate, angles, channels, etc. Rate shall inclusive of cutting, welding, grinding, fixing accessories and one coat of primer & one coats of enamel paints, etc. as required for indoor unit M-2011

SPLIT - AC UNITS - SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL of Split unit with compressor complete with indoor and outdoor units with COPPER COIL, individual controller and with fittings etc.

VENTILATION SYSTEM - Supply, Installation, Testing and Commisioning of Galvanized Sheet Steel Made Jet fans with protection guard with the following specifications 1) 250mm impeller dia jet fans 2) Motor : 0.29 / 1.27 Kw @ 4/2Pole. IP55, Class F insulation 3) Dual speed motor suitable for 300Deg C for 2 hours. 4) 4700 / 9000 CFM. output. 5) Special silencers at the inlet and outlet 6) Mounting brackets for ceiling suspensions 7) Sound level 40/60 dB

Supply, Installation, Testing and Commisioning of Galvanized Sheet Steel Made Fresh Air fans complete with the following specifications. 1) Impeller madeup of die cast alluminium alloy with Hub and blades matching with aerodynamic profile 2) Direction of discharge and rotating position as per requirement 3) Speed: 1550 RPM 4) CFM: 14,000 @ 15mm wg static pressure. 5) KW: 3.7Kw 6) Sound level: 80dB

Supply, Installation, Testing and Commisioning of Galvanized Sheet Steel Made Exhaust fans complete with the following specifications. 1) Impeller madeup of die cast alluminium alloy with Hub and blades matching with aerodynamic profile 2) Direction of discharge and rotating position as per requirement 3) Speed: 1550 RPM 4) CFM: 28,000 @ 30mm wg static pressure. 5) KW: 7.5Kw 6) Sound level: 80dB

Supply and fixing of telephone 8 Trunk line + 30 SIP Trunk + 8 Digital Extension + 256 analog Extension Expandable Up to 896 Analog Extension + 400 IP Port . M-2784

Supply and fixing of Basic Link Card for main system - To connect main system with expansion system. M-2786

Supply and fixing of Basic CAT 6A Modular 24 Port Patch Panel fully loaded M-2804

Providing and fixing of Digitally Printed Retro Reflectorized Sign Board using UV Inkjet Printer made out of cube corner micro prismatic grade sheeting of Type-XI standards of IRC 67-2022 and ASTM D 4956 – 09 specification, Digitally Printed using UV Inkjet Printer (UVIJ) for traffic colour, images/ logos/ text and laminated with clear electro- cuttable film and applied to properly prepared sign substrates, fixed over 2mm Aluminium sheet with back supporting frame of 50x50x6mm Mild Steel ‘L’ angle and supported on a 150NB (Nominal Bore) pipe with 4.50mm thick with an overall height from top of the board to foundation. The sign board should be of 2.10m clear height from the ground level to the bottom of the sign board and 1.10m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete of size 450x450x1100mm including cost and conveyance of all materials, equipment, machineries to worksite, including all labour charges for fixing the gantry in position with all leads and lifts, loading charges and necessary for satisfactory completion of the work as directed by the engineer-in-charge etc., complete. The Micro prismatic sheeting should have minimum 70% co efficient of Retro-reflection values as per table 6.90 of IRC 67-2022. The retro- reflective sheeting shall be covered under 10 Years warranty issued for field performance and a certified copy of 3 years outdoor exposure report shall be obtained as per IRC 67-2022. The warranty shall be inclusive of digitally printed images/ logos/ test/ legends and their bonding to the retro-reflective sheeting (as per MoRT&H specification no.801) of Size – 3.64m x 2.42m HW-W0098

Supply and fixing of Aluminium backed Flexible Prismatic (AFF) Sheeting shall be of 1ft width and laminated at the back with a 50 micron thick Aluminium (Al) foil with pressure sensitive adhesive and liner ,further this flexible prismatic sheeting shall have screen printed arrow /slant line pattern in black colour on top in continuous roll format. Neither AFP sheeting nor the flexible prismatic sheeting used shall crack when slowly bent in second time around a 1/8th inch mandrel after being conditioned for 24 hrs at 0 degrees and tested as per section S2.2.2 of ASTM, D 4956-09. The AFP sheeting with the linear removed shall be applied with a neoprene contact adhesive with polychloroprene as base viscosity of 200-450 cps and solid content of 20-30 % once applied the edges of the product shall be extremely resistant to peel off . A test report from institutes like ARAI/CRR/ conforming to above mentioned flexibility and ASTM D 4956-09 Type -VI retro reflectivity performance of the flexible prismatic sheeting used in AFP shall be submitted by the tenderer during pre-qualification and supply of material.2 years Pre-qualification warranty for field performance shall be submitted by the contractor for technical qualification in the tender HW-W0104

FIRE FIGHTING ARRANGEMENTS - Supply, installation, testing and commissioning of Micro Processor based Conventional 12 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt, 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.M-0767 PWD SOR 25-26 PG NO:134

Addressable Fire Alarm Control Panel consists of display board which will have 160 Character Display with Touch key pad, Mother board 32 Bit Processor, In-built RS-485 Networking Circuit for peer to peer networking, In-built USB 2.0 Port, Loop Card having 254 devices of both detectors and modules in a single line circuit, SLC supports both Class A and Class B wiring Approval: UL Listed.M-2404 PWD SOR 25-26 PG NO:274

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the departmental Officers. (Make: Ravel / Equivalent) M-0771 PWD SOR 25-26 PG NO:134

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. M-0770 PWD SOR 25-26 PG NO:134

Supply, installation, testing and commissioning of Conventional Heat Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. M-2205 PWD SOR 25-26 PG NO:274

Conventional type Horn / Strobe wall mounted type rated at 90 dBA @ 1m for Audible annunciation and 15cd minimum flashing at 1 Hz for visual indication.M-2415 PWD SOR 25-26 PG NO:274

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers M-0772 PWD SOR 25-26 PG NO:134

PIPE LINES - Supplying, laying and jointing G.I. Pipes of approved quality and best variety of “B” class pipe of the following dia including labour fixing G.I. Specials, (excluding charges for cutting and threading of pipes, cost of such specials) to wall with necessary teak wood plugs, clamps, screws, thread balls, shellac, etc., making holes on the walls (or) drilling holes in roof and making good the dismantled portions to original condition with neceSORay brick work / concrete and plastering wherever neceSORy with necessary scaffolding charges. The pipes are to be painted with the 2 coats of good variety and approved best quality of synthetic enamel paint over a priming coat of red oxide etc., complete in all floors complying with standard specification. G.I. pipes shall be got approved by the Executive Engineer before use on works - Internal water supply - Above Ground Level / External water supply - Above Ground Level - 25 mm Ø pipe

32 mm Ø pipe

40 mm Ø pipe

50 mm Ø pipe

65 mm Ø pipe

80 mm Ø pipe

100 mm Ø pipe

150 mm Ø pipe

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.

VALVES - Manufacturing, supply and delivery of resilient seated wafer type butterfly valve in accordance with EN 593, centric disk mounted in three maintenance-free bearing bushes, tight in both flow directions, Replaceable rubber sleeve with integrated seal for functionally reliable use for flared flanges, welding flanges, PE flanges as well as loose flanges with V-collar, Stable seat due to collar with vulcanized support ring. Vaccum tight upto 1 Torr. Face to face length acc.to 558-1, basic series 20 (DIN 3202/k1). With Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P, it is resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200 deg C) and with 5 years warranty PWD SOR - VOL - II PG.NO - 80 - 65 mm Ø pipe WD-M1229

80 mm Ø pipe WD-M1230

100 mm Ø pipe WD-M1231

150 mm Ø pipe WD-M1233

12.15.2 DI Pressure Reducing Valve (PN10/16) with the function to reduce downstream pressure to set point irrespective of upstream fluctuations. The downstream pressure set point can be changed as per the requirement. “Manufacture supply and delivery of DI D/F Diaphragm type own medium controlled Pressure Reducing valve with cast body of ductile iron grade GGG-40 or GGG-50 or as per IS 3896 Part-2-1985 customized control cylinder for linear control behaviour or equivalent, performed diaphragm and pull out safe profile sealing ring of EPDM, threaded inserts (CORFIX - to prevent the coating from coming off in the connections area as well as corrosion and incrustations in the control circuit) or equivalent. 2 pressure gauges for operator-friendly control to determine the actual inlet and outlet pressure connected directly to the valve. Flange connection dimensions according to EN 1092, Part 2/ ISO 7005[DIN]/ IS 1538, all parts (Epoxy coating, and diaphragm) in contact with medium are as per KTW and DVGW certified (harmless)/WRAS & NSF approved. The EPDM rubber & Epoxy coating (EP-P) should be approved by W270.(EP-P)/ WRAS & NSF.” Pilot valve system having Stainless Steel / Brass fittings with spring of SS 304 as per standard parts according to DIN EN 12 266-1 with all the external control tubing of SS 304 / Copper/ reinforced plastic rated PN16, Tightness to DIN EN 12 266-1, leakage rate A (or) equivalent and the needle valve/ speed control device should be provided to vary opening speed of the main diaphragm with self-cleaning filter to avoid possibility of dirt build up inside the control tubing and with 5 years warranty - PWD SOR II 25-26 PG NO:83 - 65 mm Ø pipe

80 mm Ø pipe

100 mm Ø pipe

150 mm Ø pipe

Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 65 mm ( 2.5 “ ) HC-W0331 PWD SOR 25-26 PG NO:349

Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 80 mm ( 3 “ ) HC-W0330 PWD SOR 25-26 PG NO:349

Providing, fixing, Testing & Commissioning of PVC Ball valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 100 mm ( 4 “ )HC-W0329 PWD SOR 25-26 PG NO:349

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.PWD SOR 25-26 PG NO:155 M-0846

Providing, fixing, Testing & Commissioning of Drain Valve with quarter turn including all necessary fittings & accessories complete. PIMTAS / AQVASTAR make 100 mm ( 4 “ ) Q

PORTABLE FIRE FIGHTING EQUIPMENT - Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers.PWD SOR 25-26 PG NO:156 M-0852

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges,neccessaryscaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. PWD SOR 25-26 PG NO:141 M-0792

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.PWD SOR 25-26 PG NO:141 M-0793

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. PWD SOR 25-26 PG NO:141 M-0794

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table E, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers.PWD SOR 25-26 PG NO:140 M-0790

Supply, erection, testing and commissioning of fire fighting application Monoblock Motor Pumpset of 1100 LPM at 45 metres head to develop 3.5 kg / sq.cm at the highest and farthest hydrant point to make 30m water jet at the time of fire fighting emergency cicumstances, coupled with 15 KW / 20 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast iron body, bronze impeller, rope gland packaging, suction size of 100 mm dia, delivery size of 80 mm dia, including the cost of foundaton concrete, anti-vibration mounting, rain safety hood and etc., complete as directed by the Departmental Officers M-0776

Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 450 LPM at 20 metres head to develop 2.0 kg/sq.cm at the heightest and farthest hydrant point to make 10m water jet at the time of fire fighting emergency cicumstances, coupled with 3.75KW / 5HP rated three phase 415 volts, 50 Hz, 2880 rpm electrical motor, the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia, including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers.PWD SOR 25-26 PG NO:136 M-0777

Supply and delivery of open well submersible pump set confirming to IS 14220/2002 and as amended thereafter andBEE 3 Star rated capable of discharging the folloing duties due to all causes . The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller,CI FG 200 grade casing and brass scres and rotor shallbe of copper rod as per IS 613/1994 with ISI mark.the pump suitable for installation in sump ith 1.1 KVA grade 3 core suitable copper flat submergible cable to a length of 15 m ith necessary cable joints . the return valve located at the top of the pump in the disharge outlet connection is to be designed with minimum friction.the pump should be directly coupled to 2880 Rpm, Threephase,50 Hz (+ or *- 5),415V +6% & 415V -15 % Squirrel cage induction mortor suitable for DOL upto 5 Hp,fully automatic air break start delta upto 20Hp and auto transformer starterfor above 20Hpstarting and continuous operation. 50 x 50 (PWD SOR PAGE NO 105)

ELEVATION WORKS - Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using adhesive and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. M-0704

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust freeconditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer. M-0658

Structural Glazing: Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875.Paint specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 1216 microns thick and back coated withalkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm.Accessories: Brackets made of CRCA powder coated / electro plated should be used to fix vertical at top and bottom and vertical to slab as per site requirement. Polyurethane brackets should be used to connect horizontal section to vertical sections.Silicone: Natural cure, with good UV resistance to be used. The above frame should be fixed to brick / concrete masonry by using nylon self–expanding cap and driving MS electro plated 80mm long screws into the caps through frames. Glass: 5mm reflective M-0671

Supplying, fabricating, erecting and fixing Calcium Silicate Board False Ceiling upto a ceiling height of 4.5m from floor level Using Perforated Sheets (10mm thick) M-0619

SCHEDULE -3 - DISMANTLING WORKS - Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls - Dismantling plain cement concrete work and clearing the debris etc., complete.

Brick / Stone Masonry in cement mortar walls under 3m high (PWD SOR 2024-2025, P,No 21, SI.No 27)

Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

AC Sheet Roofing without roof timbers

CIVIL WORKS - Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth. - FOOTING FOR COMPOUND WALL

KERB WALL

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing And Laying In Position, Standarded Concrete Mix M-20 Grade In Accordance With Is:456-2954 Using 20mm Ond Down Graded Hard Broken Granito Stone Jelly For All Rcc Items of Works With Minimum Cement Content of 325 Kg/M3 And Maximum Water Cement Ratio of 0.55, Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9103 to accelerate, Retard Setting of Concrete, Improve Workabilly Without Impairing Strength And Durability With About (5 Cu.In.) 7730 Kg. of 20mm Machine Crushedstone Jelly And With About (3.3 Cum.) 5150 Kg. of 10-12mm Machine Crushed Stone Jelly And With About (4.79 Cu.m.) 7670 Kg. of Crushed Stone Sand (M Sand), But Excluding Cost of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing and including pumping charges Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor/ Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental, Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements of Is Standards. (No Separate Payment Will Bemade By The Department For The Excess Usage of Materials) (If pumping of Concrete is required). - Foundation

Ground floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Brick work in following Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. - In Cement Mortar 1:5 - In Ground floor

Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Flooring with ceramic tiles of following size Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) Dadooing with white glazed tiles of size 150mm x 150mm x 6mm

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non- absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Three coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Supplying and Fixing of Fully Panelled Doors - External or Internal Moulded Planks Single Leaf 1000 X 2100 Type ‘A’ - (5 Panels) Etc, Complete Complying With Standard Specification and as Directed by the Departmental officers.

FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers M-0394

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work PWD SOR Pg. No. 71 Sl.No.261

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand ) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete (PWD SOR P.NO :57)

supply and installation of tensile structure Membrane Chargeable Area for surface area (Q)

FLOORING WORKS - Supplying and laying of Interlocking Paver Block Stone 63mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Providing Fencing arrangements for the sides of landscapping at site, and fencing by PVC coated diamond shape of size 100 X 100mm with 10 gauge chain link and it should be supported by a vertical angles of ISA 40X 40 X 6mm and at every 3m interval centre to centre to a height of 1.50m above ground level and below GL is 300mm and the post should be laid by PCC 1:2:4 concret. The cost shall inclusive of 300mm X 300mm Earth work excavation and 100mm thick 1:5:10 using 40mm metal and 300mm thick PCC 1:2:4, and back filling the excavation trenches and all labour charges and other incidental charges and directed by departmental officer etc., complete as per standard specification

Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with inbuilt 3mm sound bloc class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copr of plank size 1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc., complete PWD SOR,PG:NO:102 M-0650

Supply delivery of natural Pebbles filter media for Filter bed operation & sedimentary bore well of spherical in shape and allow even distribution in support bed with good flow. The media should be double washed, screened, kiln dried and classified into various sizes to meet specification including all incidental charges, conveyance, loading & unloading etc., as directed by the TWAD Board officers. Size : 5 mm to 20mm WD-W0934

LANDSCAPE & PLANTATION - Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete. HC-W0026 VOL-II SOR 24-25 PG.NO :269

Supply of Vermicompost in powder form, devoid of impurities and other materials, nutrient dense and which supports plant growth including cost of transportation

Planting of Ficus black ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges,transportation, stacking of saplings at site, earthwork excavation of required size, planting ofsapling, refilling of excavated earth etc as directed by the site in-charge. HC-W0068 VOL-II SOR 24-25 PG.NO :276

Planting of Nerium oleander dwarf foliage shrub variety of height 30-45 cm in polythene bag of size6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.HC-W0094 VOL-II SOR 24-25 PG.NO :280

Planting of Jasmine Plant foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges,transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. HC-W0081 VOL-II SOR 24-25 PG.NO :278

Planting of Ixora ordinary foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting ofsapling, refilling of excavated earth etc as directed by the site in-charge.HC-W0080 VOL-II SOR 24-25 PG.NO :278

Planting of Murraya exotica foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the sitein-charge. HC-W0092 VOL-II SOR 24-25 PG.NO :280

Planting of G2 grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. HC-W0203 VOL-II SOR 24-25 PG.NO :299

Supplying and Planting of Ashoka tree sapling of height 180 - 240 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.HC-W0209 VOL-II SOR 24-25 PG.NO :300

ELECTRICAL WORKS - Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated Indoor panel board, made up of 2 mm powder coated, including bus bar provision of double door with industrial lock with main 160A,TPN MCCB I/C and 4nos 32A TP MCCB & 4Nos 63A TPN MCCB for O/G with suitable copper bus bar (25x6mm) having three phase Digital volt and ammeter with line indicators for erecting the Indoor panel board suitable for mounting on wall surface with internal wiring and earth connections. The above panel board is to be erected with anchor fastner, bolt and nut or suitable angle etc.,

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. SD-627

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB Incomer ) with double door (metal door) with 1 No 160 A 4 P MCCB as incoming and 6 Nos 63A 3P MCB , 6 Nos 6A to 32A SP MCB as outgoing with suitable cable end box on wall with Earth connection only. Higher End SD-621

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End SD-531

Cables - Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required. - Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good .SD- 669

Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. SD- 667

Supply and clamping of following XLPE armoured LTUG cable on post or on wall MS-Clamps , Saddles, plugs, Screws etc., as required. - Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. SD-206

Supply and Clamping of 4C X 16 sqmm Al XLPE LTUG Armoured LTUG cable on post or on wall and MS Clamp with necessary accessories etc SD-204

Cable Gland - Supply and fixing of double compression brass cable gland for following Aluminium conductor XLPE insulated armoured cable of 1100 V grade with earth connection. - Supply and fixing of brass cable gland for 3 1/2 C x 35 Sq.mm PVC LTUG armoured cable with earth connection. SD-165

Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection. SD-181

End Termination - Supply and providing cable end termination of the following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable) - Supply and providing cable end termination of 3 1/2 Core x 35Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. SD-224

Supply and providing cable end termination of 3-1/2x50 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. SD-225

Supply and fixing of 1 Set of Cove Light 24W RGB LED Strip light (5 Mtr Length) in false Ceiling with LED Driver complete accessories. The rate inclusive of all taxes and transportation charges etc.

Supplyandfixingof65mmdiaGIpipe(Class'B')4metrelengthwith300mmx300mmx6mmMSbaseplatedulyweldedatthebottomwithconcretingandconstructionofmasonarypedestalwithMSboxof30cmx20cmx10cmwithangleironframeworkwithdoorandlockandkeyarrangementswithsupplyandfixingof60WLEDstreet light fittingwithbulbandwithsupplyand fixingof 1No. 16A fuseunit (500V) and5ASPswitch inside theMSboxwithPVC unsheathed FRLS leads and painting of suitable colour . ( SD-100 )

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb. SD-83

Earthing - Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. SD 221

Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work SD 222

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work SD 76

Supply and run of 25mm x 6mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work SD-370

GARBAGE BINS - Supply of Penguin dustbin FRP – 2 Layers to a height of 3½ and width of 2½ DB-198

"Supplying, erecting and Fixing precast reinforcement bench with back rest. Bench shall consist of 2 nos. L shaped bases support in natural cement color of thickness 100mm, back height 1000mm, front height 450mm, base width 620mm and 5Nos Reinforced Concrete planks in red color and size of 1500x100x50mm and 1no. reinforced concrete plank of 150x200x50mm: manufactured by using M-30 grade concrete & reinforced suitably: all parts to be joined with galvanized nuts and bolts of suitable size.VOL-II "sor : pg: no: 348 HC-W0327 PD-1890

PLAY EQUIPMENTS - Supply and fixing of ARCH SEA SAW Sea saw made of G.I.sheets with 2 Stainless Steel Pipes Boards to play 4 Children simultaneously. Seats made of fiber reinforced plastic

Supply and fixing of Merry go round – 6 Seater (FRP) Height :3” GI Pipe, 2.5mm thick, b class Seat size:15” X 14”, paint: pu coating

Supply and fixing of Swing 2 seater Height of 7ft 0” above the ground level and width of 10ft 0”. Legs made of 40mm Stainless Steel pipes and 31 Cross Bars made of 50mm SS pipes Seats fiber CPE-135 Each 64253.00 reinforced plastic seats suspended with 6mm thick in coated chain etc

Supply and fixing of Roller Slide 8ft: Measurement] Height:5ft Width: 2ft Sliding Chute:10ft Roller thickness:3mm PVC Roller with½ inch galvanised pipes. No. of Rollers.46 with multicolours. Painting with PU coating [Required area] Product area: 21/2’ft * 14’ft Play area:6’ft * 18’ft

Supply and Fixing of CCTV Cameras 5 units with Specification of Dahua- HAC-HFW 1100DP-B-0600 720P 1 Mega Pixel Analog High Definition camera, outdoor-25/30 fps@720P,1/2.9" 1 Megapixel CMOS, 50m IR,ICR, 6mm Lens optional, IR Bullet Dahua - Channel - AHD, High Video Quality on HD 1080N, Transmit Video Signal, audio signal & Dual way data communication signal over one coaxial cable, HD Video transmission without Video quality loss & delay, extremely, long transmission distance (300), Support analog 1280 H Video output, Seagate HDD 1000GB 12V 20Ah Camera Power adapter, BNC & DC Pins 18.5" Compaq HP Monitor including camera fittings charges 3+1 CCTV Cable, Cable laying with Electrical Materials, UnderFIRST Laying ( Based on Site) as directed by Departmental Executive Engineer. As per Lowest Quotation - IP CCTV CAMERA WITH POE, WDR, Built In MIC 4MP IP Bullet / Dome Camera. - M-2806 (PWD SOR 2024-2025 PG NO:255)

NETWORK VIDEO RECORDER FOR CCTV HIGHER END 16 Channel - 2 SATA (2 Nos. Hard Disk) - M-2197 (PWD SOR 2024-2025 PG NO:222)

HARD DISK FOR NVR - HIGHER END - 4TB - M-2221 (PWD SOR 2024-2025 PG NO:224)

PATCH CORD - HIGHER END 24 Port Patch Panel – Fully Loaded - M-2236 (PWD SOR 2024-2025 PG NO:224)

RACK WITH ACCESSORIES - HIGHER END - 4U Rack - M-2193 (PWD SOR 2024-2025 PG NO:224)

Armoured LAN & CCTV Cable - CAT-6 - M-2184 (PWD SOR 2024-2025 PG NO:222)

29" Led TV for display (Q)

Item Rate BoQ

BoQ_Ver3.0

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

SCHEDULE - II

Construction of Modern Integrated Bus Terminal ESHS Capacity Building, Stakeholder Engagement, Monitoring & Health (Lump Sum, inclusive of all mobilization, instruments, NABL-accredited testing, consumables, travel, permits, reporting and taxes) — Execute and document the following per ESMP/ESHS & CPCB/TNPCB/MoHFW norms, with geo-tagged photos, calibration/chain-of-custody and quarterly compiled reports: Organize meetings with line departments.

Workshop on E&S safeguards and on-job training as identified. (one time)

Use of IEC material and use of media channel to create public awareness on waste management

Consultations / GRC

Air quality monitoring (3 locations) quaterly

Surface water quality monitoring (2 locations) quaterly

Ground water quality monitoring(2 locations) quaterly

Soil quality monitoring(2 locations) quaterly

Noise quality monitoring(3 locations) quaterly

Wind speed and direction(3 locations) quaterly

Health camp, occupational health and prevention of Covid 19

Item Rate BoQ

BoQ_Ver3.0

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Please Enable Macros to View BoQ information