REPAIR REPLACEMENT TO FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTING AND CERTAIN MISC WORKS IN ZONE D OF AGE BR I UNDER GE MIS MHOW

Amount

S&F in repairs of 10 Ltrs PVC (white) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle etc, complete all as specified and directed.

S&F in repairs of PVC flush pipe of 32mm dia pipe with two Nos check nuts for connecting low level flushing cistern to EWC complete all as specified and directed.

S&F in repairs of plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs of CP brass shower rose with suvival joint 80 mm size suitable for 15mm bore pipe (Make : ZIM/Ciecko/Parko) complete all as specified and directed.

S&F in repairs of 15mm bore stop cock cromium plated ISI marked cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore (Make : ZIM/Ciecko/Parko) complete all as specified and directed.

S&F in repairs of 15mm dia brass chro-mium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete all as specified and directed. (Make : ZIM/Ciecko/Parko)

S&F in repairs of brass chromium plated bib tap for iron pipe of 15mm bore fancy type long body , screwed down high pressure complete all as specified and directed. (Make : ZIM/CIECO/PARKO)

S&F in repairs of brass chromium plated waste coupling 32mm bore for WHB complete all as specified and directed. (Make : ZIM/Ciecko/Parko)

All as per item No 8 above but 40mm bore for sink complete all as specified and directed. (Make : ZIM/GMG/PARKO).

S&F in repairs of 32mm bore and 60cm long PVC waste pipe for WHB complete all as specified and directed. (Make : Polyplast or equivalent)

All as per item No 10 above but 40mm bore for sink/ urinal complete all as specified and directed.

S&F in repairs of ball valve of PVC with rod and polythene float for 15mm bore pipe complete all as specified and directed. (Make : Prayag/Symet)

S&F in repairs of PVC connection 15mm size with PTMT nuts of length 450mm for WHB and flush tank complete all as specified and directed.

S&F in repairs of PVC connection 15mm size with PTMT nuts of length 600 mm for WHB and flush tank complete all as specified and directed.

S&F in repairs of vitreous china ware squatting pan Orrisa pattern of size (580mmx400)mm with integral foot rests with 'P' or 'S' trap (Make Hindware/CeraIst quality) including making good the disturbed surface to match with the existing complete all as specified and directed.

S&F in repairs of vitreous china wash down water closet pan (Pedostal Pattern) white incl 'P' or 'S' trap (Make : Hindware/Cera-Ist quality) and making good the disturbed surface to match with the existing complete all as specified and as directed.

S&F in repairs of vitreous chine wash hand basin, white, flat back size (550x 400)mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified. (Make : Hindware/Cera-Ist quality)

S&F in repairs of 15mm dia wall mixer brass chromium plated fixed to existing pipe/connection complete all as specified and directed.

S&F in repairs of bib tap ISI Marked, cast copper alloy with crutch or butterfly handle screwed down high pressure and screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repairs of 15mm bore size PVC bib tap complete all as specified and directed.(Make : Symat or equivalent).

S&F of chromium plated Jet for EWC with 1.00 Mtr lonf PVC pipe including nec essary GI fitting as required like toe, nipple etc complete all as specified and directed. Make : Camry/Chilly

S&F in repairs of flush handle CP with adjustable lever and brass hook for low level flushing cistern complete all as specified and directed.

M&L in replacement for GI tubing ISI marked medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc,complete all as specified and directed.

All as per item No 23 above but 20mm bore complete all as specified and directed.

S&F in repairs of PVC syphon with rod for low level flushing cistern incl brass CP handle with adjustable lever complete all as specified and directed.

S&F in repair of soap dish chromium plated brass fixed with brass nuts as in repair complete all as specified and directed.

S&F in repair of toilet paper holder brass chromium plated complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). Capacity of tank exc 500 and nexc 1000 litres complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). Capacity of tank exc 250 and nexc 500 litres complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.Capacity of tank exc 500 and nexc 1000 litres complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.Capacity of tank exc 250 and nexc 500 litres complete all as specified and directed.

Dismantling water tanks and removing to store Capacity of tank exc 250 and nexc 500 litres complete all as specified and directed.

Dismantling water tanks and removing to store Capacity of tank exc 500 and nexc 1000 litres complete all as specified and directed.

S&F in repairs of incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 1000Ltrs (in double layerls) incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene floatcomplete all as specified and directed.

S&F in repairs of incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 500Ltrs (in double layers) incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float complete all as specified and directed.

S&F in repairs of galvanised Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples incl wooden fillets (15x15mm) duly painted with synthetic complete all as specified and directed.

Hacking out old broken glass of any thickness/size or quality from wooden/ metal frame fixed with putty/beading complete all as specified and directed.

S&F of 4mm thick sheet glass, plain ordinary quality not exc. 0.50sqm in each pane complete all as specified.

All as Srl No 38 above but exceeding 0.50sqm each pane.

All as Srl No 38 above but 3mm thick frosted glass.

S&F in repairs of towel rail 600mm long 20mm dia brass chromium plated fixed with wooden gulties embeded in cement mortar (1:3) with MS screws etc, complete all as specified and directed.

S&F in repairs of sheet glass shelf 5.5mm thick with aluminium bracket and railing 60cm long and width 12.5cm as per sample complete all as specified and directed.

S&F in repairs of mild steel chromium plated grating (round)125mm dia fixed over floor/Nahani trap complete all as specified and directed.

S&F in repairs of HDPE PVC lid (cover) for 1000 Ltrs capacity PVC tank (Make : Syntex or Sheetal) complete all as specified and directed.

S&F in repairs of chromium plated brass stop cock fancy type screwed both ends high pressure for 15mm bore size iron pipe or ferrule concealed type long body complete all as specified and directed.

S&F in repairs of spindle brass for concealed stop cock 15/20mm bore size.complete all as specified and directed.

Grinding cutting and polishing to surfaces of existing Kota stone foor/skirting/dado complete all as specified and directed.

S&F in repairs of ISI marked MS 300mm size ordinary rat tail rod pattern spring for door incl roller & roller platecomplete all as specified and directed.

Taking down cement plaster from brick or concrete surface incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on brick surface of walls finishing even & smooth without using extra cement including 3mm thick wall care white cement putty on newly plastered surface to prepare the surface even and smooth complete all as specified and directed.

Providing 3mm thick wall care white cement putty on old plastered surface to prepare the surface even and smooth incuding removing old treatment and roughening of exiting old surfaces of wall complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:4) on concrete surface as ceiling finishing even & smooth without using extra cement including 3mm thick wall care white cement putty on newly plastered surface to prepare the surface even and smooth complete all as specified.

M&L rendering 5mm thick in cement mortar (1:4) on concrete surface as ceiling finishing even & smooth without using extra cement complete all as specified and directed.

M&L for 3mm thick wall care white cement putty on old plastered ceiling surface to prepare the surface even and smooth incuding removing old treatment and roughening of exiting old surfaces of ceiling complete all as specified and directed.

M&L for brick work with sub class 'B' bricks to any redius as in half brick thick wall built in cement mortar (1:4) incl dismantling existing brick work built in cement mortar complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on brick surface of walls finishing even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on brick or concrete surfaces finished even and smooth without using extra cement all as specified incl mixing with liquid water proofing compound Note: (WPC (liquid) shall be measured and paid separately).

M&L for two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004,Alkali and fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm over new surface including preparation of new surfaces complete all as specified and directed.

M&L for Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer,of required shade and colour complete,as per manufacturer,s specification. Two or more coats on new work.Incuding preparation of new surfaces and prming with alkali resistance priming paint on wall complete all as specified and directed.

M&L for Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer,of required shade and colour complete,as per manufacturer,s specification. Two or more coats on new work.Incuding preparation of new surfaces and prming with alkali resistance priming paint on ceiling complete all as specified and directed.

M&L for three coats of white wash on wall on newly plastered / concrete sufaces incuding preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on ceiling on newly plastered sufaces incuding preparation of surfaces complete all as specified and directed.

S&F in repairs stainless steel plate rack of size 900x750x250mm depth size made out of 0.75mm thick sheet (Make : Neelkanth/Comet International/Hindustan)

Repair on low level flushing cistern i.e. adjustment of syphon washer, adjustment of handle, float valve as required making the cistern functional complete all as specified and directed.

Removal of air lock, blockage in water pipes/bib taps/stop valve incl cleaning pipes as required and as directed to ensure proper flow of water complete all as specified and directed.

S&F in repair of stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen CM, dwarf wall and incl fixing cast iron cantilever bracket connecting union over all size not less than (915m x 460)mm with bowl size (410x330x160) mm complete all as specified and directed.

Racking out joints/pointing to brick work or brick tiles laid flat on roofs in cement mortar complete all as specified and directed.

M&L for flush pointing to bricks tiles laid flat or brick tiles in paving in cement mortar (1:3) and using liquid WPC complete all as specified.

Supply only liquid water proofing compound complete all as specified and directed.

Demolition of brick work built in CM incl all quaries arches and pillar etc complete all as specified and directed.

M&L for burnt brick work in CM (1:6) using old size sub class B bricks straight/curved or charfered on palne exc 6m mean radius complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in ground floors and paving n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L 40mm thickness PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, finished even and smooth incl roughening old concrete surfaces etc complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from site complete all as specified and directed.

M & L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.0.06 Sqm but n. exc 0.11 Sqm, over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface as in Dado (300x200) x6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in wall complete over 10mm thick rendering in CM (1: 4) complete all as specified and directed.

Demolition of kota stone floor laid ,bedded and pointed in any mortar complete all as specified and directed.

Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and applying brushing neat cement slurry with 3.0 kg of cement per sqm etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick laid over and including 20mm thick screed bed in CM (1:4) and jointed with grey cement slurry mixed with pidment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for kota stone slab 10 to 15mm thick in skirting laid over and including 15 mm thick rendering in CM (1:4) and jointed grey cement slurry mixed with pidment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for plain cement concrete(1:2:4) type B1 using 20mm graded stone aggregate as in roof karb mud stop etc complete all as specified and directed.

Supply only Anti termite chemical of approve make complete all as specified and directed.

M&L PVC mirror cabinet of size (550x450mm) and firxed to wall after taking down old mirror all as specified and directed (Make : Prayg or equivalent)

S&F in repair of 160mm dia PVC (SWR) rain water pipes single socket in any length with rubber ring/jiont fixed to walls with necessary pvc clamp including taking down exiting old damaged PVC pipe complete all as specified and directed.

S&F in repair of 40mm wide 6 to 3 mm thick rubber beading fixed to door shutter with nails complete all as specified and directed.

All as per item no 86 as above but 50mm wide and 6 to 3mm thick tappered complete all as specified and directed.

Taking down shutters of any description n.exc 1.0Sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentery work and refixing in same opening complete all as specified and directed.

All as per item No - 88 above but exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0Sqm and n.exc 2sqm each and removing to or from store complete all as specified and directed.

S&F for 35 mm thick factory made 2nd class HW plain framed,panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered partical board with commercial veneering on both faces.The size of rail and style as per IS:1003(Part-I),kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for 35mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass,gauze etcdivided into squares.with sash bars (any numbers )edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauge wire complete all as specified and directed.

Taking down old pelmet and refixing after necessary repair including clamps/picture plate complete n.exc 1.50 mtr long complete all as specified and directed.

All as per item No - 93 above but length of pelmet exc 1.50 mtr and n.exc 2.00 mtr complete all as specified and directed.

S&F as in repair of 19mm bore mild steel chromium plated curtain rod complete all as specified and directed.

S&F as in repair of curtain bracket suitable for 19mm bore curtain rod complete all as specified and directed.

S&F in repair of floor door stopper of chromium body and tongue with hard drawn steel spring 140mm long

S&F in repair of 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter

All as per item No 98 above but 200mm size complete all as specified and directed.

S&F of 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and directed.

S&F in repairs of 300mm size of bolt aluminium anodised, sliding door bolts witgh hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repairs of 300mm size of bolt aluminium anodised, sliding door bolts witgh hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F in repairs of 100 mm size of Butt hinges, medium weight cold rolled mild steel complete door etc complete all as specified and directed.

S&F of 100 mm size of Butt hinges, medium weight cold rolled mild steel complete door etc complete all as specified and directed.

S&F in repairs of 75 mm size of Butt hinges, medium weight cold rolled mild steel complete door etc complete all as specified and directed.

M&L for glass deviding strips,3mm thick and 38mm wide inserted in position complete all as specified and directed.

S&F in repair of 100 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and directed.

S&F in repair of 300mm MS sliding door bolts, plate type, stove enameeled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple late complete all as specified and directed.

S&F in repairs of 125 mm size extruded aluminium alloy handles fubricated type anodised complete

All as per item No 109 above but but 150mm size complete all as specified and directed.

S&F of 150 mm size extruded aluminium alloy handles fubricated type anodised complete

S&F in repair of 100mm size double action spring hinges mild steel with steel wire spring, stove enamelled black complete all as specified and directed.

M&L for 19mm thick prelaminated particle board both sides with decorative choice including necessary Second class hard wood 6mm thick eding for cup boards all as specified and directed by Engr in Charge

M&L in repair for 19mm thick block boards, grade 2 quality, commercial type, fixed with screws to timber frame complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on surfaces of any description, not otherwise described over 10cm width or girth, over a coat of wood pink primer incuding preparation of new untreated wooden surfaces complete all as specified and directed.

M&L for applying one coats of synthetic enamel paint on surfaces of any description, not otherwise described over 10cm width or girth, incuding preparation of old painted wooden surfaces complete all as specified and directed.

M&L for applying one coats of synthetic enamel paint on surfaces of any description, not otherwise described over 10cm width or girth, incuding preparation of old painted steel surfaces complete all as specified and directed.

S&F in repair of Left & Right MS handle to suit old steel window with necessary washer and bolts complete all as specified and directed.

S&F in repair of MS pegstay to suit old steel window with necessary washer and bolts complete all as specified and directed.

S&F in repair of ball bearing for rolling shutters complete all as specified and directed.

M&L for greasing in the movable parts of rolling shutters of any size and description, adjusting of springs, guides, locking plates etc complete making in working condition complete all as specified and directed.

Taking down and refixing/repairing small parts of rolling shutter and other black smith job guard bar/grill in existing opening by welding or seuring with screw complete all as directed.

Repair of WC joint fitting with white cement to stop leakage and finished properly complete all as specified and directed.

S&F in repairs of 20 to 40mm external dia drapery rods powder coated completed including taking out old pelmets with curtain rods complete all as specified and directed.

Securing/tightening of chowkhats fixed in position and including making good with platering complete all as specified and directed.

M&L for two hand cleanig by using sand paper of 36 No for first hand sanding and 60 N0 sand paper for second hand sanding and applying two coat of Asian PU polish on exiting wooden floorcomplete all as specified and directed.

Cutting out cracks to V-section in existing brick wall ,cleaning out,wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed.

S&F of MS chicken wire mesh with nails over filled crack suface to received plaster complete all as specified and directed.

Cutting of vegitable plants from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC (1:2:4) type B1 with surface finished to match complete including scuffolding etc complete all as specified and directed.

M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade including taking out of old demaged interlocking paver block complete all as specified and directed.

M&L for 50mm thick sand cushioning for Machine pressed precast concrete interlocking paver block including watering and consolidation complete all as specified and directed.

M&L for coloured chequered cement concrete tiles (40cmX40cm)X25mm thick laid over 20mm thick screed bed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of tiles complete all as specified and directed.

M & L for 75 mm thick plain cement concrete (1:3:6), type C1, with using 20 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming constructions joints and filling the same with bitumen filler complete as specified and directed.

M & L for 50 mm thick plain cement concrete (1:2:4), type B2, with using 40 mm graded stone aggregate in floor, finish the surface even and smooth without using extra cement complete as specified and directed.

M&L for repair for existing parquet flooring by taking out loose parquet wooden flooring pieces and pasting again in place with the adhesive fevicol of pidilite including replacement of demaged piece of parquet flooring complete all as directed and specifided.

M&L for 100mm size hook & eye mild steel galvanised as in window stopper fixed as in repair complete all as specified and directed.

Dismantling wall & ceiling boards (fiber, pulp, insulation etc) or insulating boards/slabs/blankets or AC boards any thickness including fillets of any description etc complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete. Note:- Opening of existing wind tie where required for taking down of AC sheet is included in the rate quoted against this item. complete all as specified and directed.

Dismantling structural steel work of any description as in purlin, rafter etc. excluding framed truss etc. complete all as specified and directed.

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns pinhole 8mm thick semi perforated square edge tile having NRC (Noise Reduction coefficient) of 0.50 (minimum) Light reflectance of 85% (minimum). Non combustible as per BS: 476 (PART-4), fire performance as per BS : 476(PART 6 & 7 ), humidity reistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, in true horizontal level suspeded on interlocking metal powder coated T-Grid of hot dipped galvanized iron section on Silhouetter profile, rotary stitched double webbed white with 1 mm reveal profile (White/black), comprising of main-T runner of size 15 x 32mm of length 3000m, cross - T of size 15 x 32 mm of lenght 1200mm and secondary intermediate cross-T of size 15 x 32 mm of lenght 600mm to form grid module of size 600 x 600 mm, from ceiling using galvanized mild steel item, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 19 x 19mm of length 3000 mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall S.S. screws. The work shall carried out as per specifications, drawing and as per directions of the Engineer-in-Charge .

S & F of Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The Prepainted galvalume aluminium zinc GI based profile pattern steel sheet sould be TATA Blue Scope Colourbond XRW or Equivalent.

S & F of Pre-painted galvalume aluminium zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge.

Dismantling framed trusses n.exc 10m span complete all as specified and directed.

S&F of MS hollow tube rectangular / square in section and used for trusses,purlins and rafter etc as structure member complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on surfaces of any description, not otherwise described over 10cm width or girth, over a coat of red oxide primer incuding preparation of new steel surfaces complete all as specified and directed.

S&F in repair of PVC (SWR) bends 160mm bore for rain water pipe complete all as specified and directed.

Stripping of old tarfelt treatment incl cement plaster, concrete padding etc and cleaning the surfaces to make free from dirt/bitumen etc and disposing the rubish out of the premises as directed by the Engineer-in-Charge.

M&L for Brushing neat cement slurry with 3.00Kg of cement per Sqm.complete all as specified and directed.

Rendering 20mm thick in CM (1:4) on fair faces of concrete surface using liquid water proofing compound finished plastered surface even and fair without using extra cement complete all as specified and directed. NOTE: (liquid water proofing compound measured and paid separately)

M&L for preparation of surfaces for applying bituminous primer( confirming to IS-3384-1965) @ 0.40Kg/Sqm complete all as specified and directed.

M&L for applying a tack coat of Industrialbitumingrade of 85/25 at the rateof 1.2Kg per Sqm includingcleaning surfaces(1st coat for bonding materialbelow membrane and 2nd coaton top of membrane. Each coat would be paid seperately) complete all as specified and directed.

M&L for fixing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gm/Sqm) land on primed surfaces by force application complete all as specified and directed.

Demolition of precast cement concrete jallies as in boundary wall incuding coping beam and removing all debris from premises complete all as specified and directed.

Providing precast cement concrete (1:2:4) type B0 (12.5mm garded stone aggregate) jallies, 40mm thick,including all moulding and set in CM (1:4) complete all as specified and directed.

M&L for RCC (1:2:4) type B1(20mmgraded aggregate) as in coping beam complete all as specified and directed.

Formwork to sides and soffits of coping beam finished surfases faircomplete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups complete all as specified and directed.

Chitragupta Construction

NIDHI CONSTRUCTION

M/s Himgiri construction

M/S Sunshine Construction