Nursery Extension work at Sidhra Nursery of Eco Task Force Project Division under CAPEX in FY 25-26 and 2026-27.

Earth work in excavation by manual means in trenches for foundations,drains,pipes, cables etc. (not exceeding 1.5m in width) and for shafts,wells,cesspits and the like not exceeding 10 sqm on plan ,including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soil.

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge

Providing and laying of RBM

Providing and fixing of iron removable MS sheet drain gates (complete job).

Carriage of materials from source to site sand by M.T 20Km

Carriage of materials from source to site Bajri by M.T 20Km

(WERMI COMPOST) Excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:5:10 (1 cement :5 coarse sand : 10 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Carriage of material form source to site of work by M.T. Sand av. Distance 20 KM

Carriage of material form source to site of work by M.T. Bajri av. Distance 20 KM

(CHAIN LINK FENCING) Excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand :4 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 2 coarse sand :4 graded stone aggregate 20mm nominal size) Crushed

Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing G.I chain link Fabric Fencing of required width in mesh size 50x50mm including strength with 2mm dia wire or nut, bolts and washers as required complete as per direction of engineer -in - charge made of G.I wire of dia 4mm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade on new steel works.

Carriage of material Sand av.20KM

Carriage of material Bajri av. 20KM

(BORE WELL) Deep drilling of bore hole 125 mm dia as per the strata encountered as per IS specificatiopn by using ODEX method and lowering of Mark -II hand pump with additional rise pipes/ connection rod jpb includes construction of cement concrete platform as per site condition the job also include of Ms casing pipe if any required during the drilling work.

Cost of 125mm dia M.S. Casing pipe The 125mm dia S casing pipe ISI marked should have thickness of 5.4mm conforming to IS 4270/2001 medium class (part-1) 2004 (heavy C -Classs weight per meter 18Kg ) electric resistance welded beveled ended inside beed free pipes All pipe from inside and outside to be provided with two coat of anti -corresive paint of sperior /approved quality There should be no circumferential weld the pipe from inside should be been free having smooth finish each pipe shall have subjected to hydrollic pressure test at the menufacturer work in accordance with IS 4270/2001 with latest ambendments all the physical and chemical properties of pipoe including tensile strength should be in accordance with IS 4270/2001 with latest

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 4 ( 1 cement : 4 fine sand)

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Providing and installation of three phase Submersible water pump 2 H.P. Crompton , Gayatri , Havells

Providing and installation of10 (KVA) Digital servo (copper) input voltage range 160v to 280v and with service line wire cable . All complete Job.