Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹26.8 L+₹3.1 L (13.2%)Rejected-Finance | L2 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER | |
| 3 | L3₹29.4 L+₹5.7 L (23.9%)Rejected-Finance | L3 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
20 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Leh
GE (AF) Leh PIN - 194101
CERTAIN B/R REPAIRS MAINT OF AGAINST CERTAIN E/M INSTALLATION AT AF STN LEH UNDER GE (AF) LEH
2023_MES_611003_2
GE(AF)/LEH/T-43/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Leh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) Leh
₹50,000
Yes
19 Dec 2023
28 Sept 2023
23 Oct 2023
28 Sept 2023
20 Oct 2023
6 Oct 2023
Amount
Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.
Anodised aluminium frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engineer-in- Charge.
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1-No.), complete all as specified and directed by Engineer-in-Charge
Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by Engineer-in- Charge.
Aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3, universal type, suitablefor door shutters of upto 1000 mm in width and of weight between upto 60 kg and fixed, complete all as specified and directed by Engineer-in-Charge
Aluminium door Stoppers fixed in and including taking down old door stopper, complete all as specified and directed by Engineer-in-Charge
Second class soft wood in Scantling in and including taking down old and decayed timber, complete all as specified and directed by Engineer-in-Charge
Second class soft-wood Plain,of sectional area exc 13 & n exc 25 Sq.cm fillets square, rectangular or triangular in section clean sawn, secured with nails or brads in and including taking down old and decayed timber, complete all as specified and directed by Engineer-in-Charge
Pre-laminated particle board 9mm thick , interior grade, pre-laminated both side with decorative choice laminaton & other side balancing white lamination fixed with screws/ nails to timber frame work in repair including dismantling old decayed boards complete all as specified and directed by Engineer-in-Charge
S&F in repairs for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work in wall, ceiling flat or sloping complete including dismantling old decayed boards complete all as specified and directed.
S& F in repair HDF based laminated wooden flooring of planks of size 1.20m x 0.198m x 8 mm thick non glue laminated flooring including 0.6 mm PE poly moisture foam as in underlay barrier of overlapping 20 cm fix them with adhesive tape, boarding fix in floating manner based tongue and groove interlocking arrangement including taking down old and decayed wooden boarding of any description ,complete all as specified and as directed by Engineer-in- Charge. Note : Colour and design all as approved by GE
M&L in repair 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmx600mm grid with and inclusive of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre thick exposed metal frame ceiling with calcium silicate board of siliceous and calcarious material reinforeced with cellulose fibre for fixing 600mmx600mm grid (Frame work for ceiling shall be measured and paid separately) and taking down existing old broken wall and ceiling boards any thickness including cover fillets with ceiling grid.
Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane and sheet glass is ground or obscured or frosted, on one side, complete all as specified and directed by Engineer-in- Charge.
Sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, glazed with putty or fixed with beads in and including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads ,complete all as specified and directed by Engineer-in- Charge.
S&F in repair pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screws including plain or corrugated steel sheeting any gauge, thickness, including dismantling plain or corrugated steel sheeting any gauge, thickness, any pattern roof covering complete all as specified and directed by Engineer-in- Charge.
S&F in repair pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding plain or corrugated steel sheeting any gauge, thickness, including dismantling plain or corrugated steel sheeting any gauge, thickness, any pattern roof covering complete all as specified and directed by Engineer-in- Charge
S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8 including dismantling plain or corrugated steel sheeting any gauge, thickness, any pattern roof covering complete all as specified and directed by Engineer-in- Charge
Rolled mild steel sections as in column main and joist, channel, angle, or tee sections, fixed independently etc. (cut to ordinary lengths i.e. within 20mm of the length indicated, fixed with angle cleats or other connecting plates of Fe 410-W (Gde E-250) quality-A in and including dismantling of structural steel , complete all as specified and directed by Engineer-in-Charge
M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick Work or concrete surfaces including finished even and smooth without using extra cement including taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement including taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed all as specified and directed.
M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 including demolition of brick work or stone/ bouldar masonry built in cement mortar or cement line mortar including all quoins, achers, pillars etc but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and directed by Engineer-in-Charge
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even , complete all as specified and directed by Engineer-in-Charge.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even , complete all as specified and directed by Engineer-in-Charge.
Preparation of new plastered surfaces of walls and applying two coats of dry distemper on walls complete all as specified and as directed by Engineer-in-Charge.
Preparing new plastered surfaces of walls and applying two coats of cement base paint , complete all as specified
Plain cement concrete 25 mm thick (1:2:4) type B-0, using 12.5 mm graded mechanically crushed stone aggregatesd aggregate as in sub base to floors including demolition of cement concrete in ground floor or paving n exc 15 cm thickness (below or above ground level) and removing rubbish of the permises complete all as specified and directed by the Engineer in Charge.
Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in Cement plaster 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of stone slab and tiles of any discription or thickness in floor aprons etc laid bedded and pointed in any mortar and removing rubbish of the permises complete all as specified and directed by the Engineer in Charge.
Preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge
100mm thick PCC 1:2:4, type B-2 using 20mm graded stone aggregates as in floor, finished even and fair, complete all as specified and directed
100mm thick PCC 1:2:4, type B-2 using 40mm graded stone aggregates as floor, finished even and fair, complete all as specified and directed
k.s.construction
Ms Salaria Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .