Supply of Digital Electronic Balance, UV-VIS Spectrophotometer, Digital Turbidity Meter, Hot Air Oven, Auto Burette, Digital Micropipette, Autoclave etc. complete in all respect.

Amount

Digital Turbidity Meter: Hach Specifications • Turbidity Range 0 to 1000 NTU • Resolution & Accuracy 0.01 NTU (0 to 9.99 NTU); 0.1 NTU (10 to 99.9 NTU); 1 NTU (100 to 1000 NTU) & ± 2% of measured range + 0.01 NTU • No. of Calibration Points Up to 3 points • Calibration Options 4 points (0.02, 10, 100, 1000) • Light Source White light (tungsten) • Response Time < 6 seconds • Power 12 VDC, using AC adapters 110 VAC or 220 VAC, 50/60 Hz

HOT AIR OVEN -Make Iso certified Company (Specifications) • Inner Chamber SIZE:18”X18”X18”inch(LxWxD) • Double walled inner chamber available in stainless steel with grade304. • Outer chamber made of Stainless Steeel • Glass wool/ PUF insulation to prevent temperature loss. • Outer double wall door is provided with gas kit. • Stainless steel removable & adjustable shelves . • No. of Shelves-3nos • Digital display with mains ON/OFF, switch indicating lamps & Fuse • Digital microprocessor based PID Temp controller with LED Display • accuracy of temperature +/- 0.5 degree • Temperature range adjustable from Room Temp. to2600C (resolution 0.10C) • Air flow systems providing Blower for even distribution of temperature.tt • Safety thermostat to prevent over heat. • Electric Supply:220/230V AC,50/60 Hz,2500watt Calibration Certifiate From NABL Certified Lab Required

Digital Micro Pipette Variable Volume 0.05 ml to 5 ml Make : Mettler Toledo/ Borosil

Digital Micro Pipette Variable Volume 10 ml to 20 ml Make : Mettler Toledo/ Borosil

Autoclave 1-Horizontal Rectangular High Pressure High Vacuum steam Sterilizer. 2-Chamber size shall be minimum of 2 feet width x 2 feet height x 4 feet length.3-Should be operated on 400-440V, 3 phasewith neutral, ACpowersupply.4-Chamber volume shall be minimum of 420 liters. 5-Steam generator volume shall be minimum of 60 liters and should be fitted with suitable electrical heater load of 18KW, to produce steam to sterilizer. 6-The sterilizer shall have single door (Hinge type ) with radial lockingusing shooting bolts having high pressure locking safety facility and made of good quality stainless steel304quality. Should provide heat resistant SILICON door gasket withstand upto 140 Deg. C. 7-The sterilizer shall have to draw the water, automatically, when needed in the inbuilt boiler. 8-Thickness of chamber of sterilizer shall be minimum 6mm and to be made of stainless steel 316 qualityis capable to withstand the negative pressure (vaccum) of 24-26’’Hg created by the vaccum pump. 9-Thickness of door of sterilizer shall be minimum of 12mm and to be made of stainless steel 316 quality. 10-Sterilizerjacket shall be made of Boiler quality steel plate with a material thickness of 6-8mm. 11-Glass wool insulation thickness shall be 50mm. Insulation cover shall be made of good quality stainless steel 304 quality. 12-All connecting pipes shall be made of good quality stainless steel. 13-Stand shall be made of Mild steel with anticorrosion paint. 14-The unit shallbe fitted with suitable water ring Vacuum pump. 15-Pressure gauge range shall be 0 to 6 Kg./cm2 . 16-Compound gauge range shall be –1 to 6 Kg/cm2. 17-Safety valve range shall be 0.3 to 3.5kg/cm2. 18-The unit shall be capable of being stored continuously in ambient temperature of 0-50 Deg.C and relative humidity of 15-90%. 19-Suitable validation port shall be provided. 20-Working temperature of sterilizer is 121-134 Deg. C and the corresponding pressure is 1.2-2.1 kg/cm2. 21-Safety features of sterilizers: Doorlocking facility, Low water protection system, Pressure cut off facility and all other necessary safety features. 22-Equipment shall have no sharp edges, will be securely mounted and would provide adequate protection against movingand electrically energizedparts. 23-Controls (e.g.switches, knobs) shall be visible and clearly identified. 24-Labels and markings shall be clear and visible.

Digital Auto Burette ( Bottle top Burette) Cap. 10 ml Self Zero Discription • Precision titrations within the error limits of Class A • Large, easy-grip hand wheels for sensitive, drop-wise titration • Titrating tube can be adjusted horizontally and vertically - providing flexibility when positioning the instrument • No switching needed when changing between filling and titration • Calibration scheduler saves a date for the next calibration, Auto-Power-Off, Change decimal place settings • Easy cleaning, maintenance and part replacement Calibration: Calibration certificate from any NABL certified Laboratory required with validity of at least 1 Year.

R-INITIATIVE ENTERPRISES