REPAIR AND MAINT TO DRAINS, PATHS, FENCING, GATES, BOUNDARY WALLS ETC AT LAL TIKKU KHAD AREA UNDER AGE B/R-II OF GE (SOUTH) MAMUN

Amount

Taking down cement plaster / wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling fencing, wire mesh any type and stacking at site complete all as specified and directed.

Dismantling post or struts (wood,steel or RCC) any position,including taking out embedded portion and making rood disturhed grond, post embedded in concrete, brick work, masonry etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) or tiling etc in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

Demolition of Stone slabs of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors, finished even & rough to receive floor top finish complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerbs, coping, bed plates benching, floor by maintaining required gradient / undulation etc slightly rounded or chamferred angles and throating, complete all as specified and directed.

M&L in repairs for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in surface channels & drains complete all as specified and directed.

M&L for brick work with fly ash bricks old size straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with fly ash bricks, old size as in half brick thick walls straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 over on brick work or concrete surfaces of walls, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L in repairs for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block 60 mm thick, M-35 grade of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 complete all as specified and directed.

All as per description of serial item No. 14.00 here-in-before but except paver blocks. Note: Old retrived serviceable paver blocks shall be re-sed.

M&L for Sand filling as sand cushion under paver blocks using clean graded fine sand including levelling watering & compacting to required gradient complete all as specified and directed.

M&L for fly ash glossy finished Chequered cement concrete tiles 30cm x 30cm x 20mm thick with grey cement and pigment laid jointed and pointed in neat cement slurry in floors over & including 15mm thick screed bed in CM 1:6 set complete all as specified and directed.

S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) including taking out existing damaged barbed wire complete all as specified and directed.

M&L for mild steel fencing posts/struts including embeding in concrete and screwing etc. including securing bolts; including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets, round bars (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires of any mesh size, type and of any standard, rails, straining bolts etc including provision of binding wire complete all as specified and directed. Note: Supply of chain link fencing shall be measured & paid for separately.

Supply only chain link fencing of any mesh size 50mm x 50mm, 3mm dia GI wire as approved including provision of binding wire complete all as specified and directed. Note:- Weight of chain link fencing shall be ascertained by BOO convened by GE.

M&L for MS Round bars 10mm dia and over, cut to length, bent to shape required, including crankig, bending, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia or securing with clips complete all as directed

S&F mild steel screw bolts (machine made) 5 to 10 mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5 cm but n exc 10 cm long complete all as specified and directed.

M&L for preparation of new surfaces of steel or iron of any discription exc 10cm width or girth and providing two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

M/S TARA CHAND CONSTRUCTION CO. (BID ID -3426098)

surjit enterprises (BID ID -3425791)

Walia trading co (BID ID -3429307)

Bidder Name

surjit enterprises

Walia trading co

Ambika Construction Co

M/S TARA CHAND CONSTRUCTION CO.