SPECIAL REPAIR TO BLDG NO F-5 INCLUDING CERTAIN SANCTIONED WORKS UNDER GE SAUGOR

Amount

Demolition of stone sett paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding removal servicable tiles from site and rubbish off the premises complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars, etc built in cement mortar complete all as specified and directed..

Demolition of PCC of any description and in any position unreinforced complete all as specified and directed.

Taking down cement plaster on brick wall including raking out,joints hacking for key's scrubbing down with water complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Excavation over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

M&L for hardcore of gauge not exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 40mm thick uniformly levelled surface of stone dust cushioning complete all as specified and directed.

M&L for 600mm x 600mm x 8mm to10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Srl item No. 12 above but in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) -ditto-

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar(1:6) complete all as specified and directed..

M&L for glazed ceramic tiles of size 600mm x 300mm x 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed. .

M&L for moorum/red bajri filling in floors or pavings laid in layers not exc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping, benching and other similar work with weathering slightly rounded edges and throating etc as req with and incl all necessary form work complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregates), 100mm thick, as in sub base complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregates as in plinth protection surface finished even & smooth using extra cement providing with construction joints 10x20 mm filled with bitumen and sand mortar 1:3 complete all as specified and directed.

M&L for two coat cement plaster, first coat 15mm thick CM 1:6 on brick wall surfaces and second coat cement plaster 5mm thick in CM 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. (Note:-water proofing compound shall be measured and paid seperately under respective item).

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 15 mm thick on surface other than fair face of brickwork with CM 1:6 finished even & smooth without using extra cement complete all as specified and as directed

M&L for precast cement concrete 1:1.5:3, type B1 (using 20mm graded stone aggregates) as in kitchen platform slab, shelf slab, manhole cover slab etc including necessary form work etc., complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately.

M&L for mild steel TMT bars 10mm dia cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

S&F in replacement 25 mm bore MS chromium plated conduit drapery rods, suitable for door/widows curtain with dooms with brackets fitted to each end and fixed to wall complete all as specified and as directed

Taking down chowkats/frames of area n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and as directed.

Taking down chowkats/frames of area exc 1.5 Sqm and not exc 4.0 Sqm with shutter (without taking off shutters from the frame) complete all as specified and as directed

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1.2.4, type B-1 (using 20 mm graded stone aggregates) and filling hollw portion of the frame with PCC 1:3:6, type C-0 (using 12.5 mm graded store aggregates) complete all as specified and as directed

S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1.2.4, type B-1 (using 20 mm graded stone aggregates) and filling hollw portion of the frame with PCC 1:3:6, type C-0 (using 12.5 mm graded store aggregates) complete all as specified and as directed

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed (with double or single shutter) complete all as specified and as directed

S&F 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fritted to chowkats complete all as specified and as directed.

M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed

S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet boxes,shelves complete all as specified and as directed

M&L for external teak wood lipping, 6mm thick, fixed with nails for 18/19mm thick prelaminated boards complete all as specified and as directed.

S&F continuous (piano hinges, mild steel, bright finish or electrogalvanished width of flaps (when opened) 40mm complete all as specified and as directed

S&F Aluminium handles 100mm size, cast type, anodised complete all as specified and as directed

S&F 100 mm hasp and staple, safety type, aluminium anodised, with mild steel hinge pin includingt bolt ti hinge plate and fixed with screws complete all as specified and as directed

S&F fixed type ventilators aluminium powder coated of frame size 50.80mmX 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and as directed (Al. section thickness 1.50 mm }

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and as directed (Al. section thickness 1.50 mm }

M&L for cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. one brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and as directed

S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and as directed

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Length of bolt 300 mm & dia of bolt not less than 12mm complete all as specified and directed.

S&F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws complete all as specified and as directed

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

S&F structural steel work in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc confirming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed

S&F pre-painted Galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and as directed

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

M&L for applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of acrylic distemper over a coat of interior primer including preparation of new wall surfaces of walls complete all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying two coats exterior emulsion paint over one coat of exterior primer complete all as specified and directed. Make:- Asian ACE or equivalent make as specified in Appx 'C' of list of makes

M&L for complete removal of existing treatment and applying three coats of white wash over ceiling surfaces including preparation of surfaces of old surfaces complete all as specified and directed

S&F in repairs 110mm bore PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall including mild steel clamps of suitable size complete all as specified and directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or fixed to walls complete all as specified and as directed

Removing excavated materials (soil) to a distance notexc. 150 m and deposting where directed, at a level not exc. 1.5m above the starting point complete all as specified and as directed

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and as directed

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repairs PVC(SWR) vent cowl of 110mm dia complete all as specified and as directed

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm bore GI tubing and connections complete all as specified and directed

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm bore GI tubing and connections complete all as specified and directed

S&F in repairs two way bib cock with wall flage chromium plated brass complete all as specified and directed. Make:-Jaquar cat-No-FON-40041 or equivalent make as specified in Appx 'C' of list of makes

S&F in repairs hand shower (health focet) with 1 metre long easy flex tube with wall hook chromium plated brass complete all as specified and directed. Make:-Jaquar cat No- ALD-CHR-565 or equivalent make as specified in Appx 'C' of list of makes

S&F in repairs C P bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed..

S&F in repairs Vitreous China wash down water closet pan (pedastal pattern), white including white seat cover complete all as specified and directed.

S&F in repairs vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.

S&F in repairs concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed.

S&F in repairs 125 mm size brass chromium plated shower rose including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed.

S&F in repairs tolilet paper holder, vitreous China white, box type to walls with CP (CP) brass screws complete all as specified and directed.

S&F in repairs PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm prelam PVC sheet on back face complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F 100mm butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position of 1000 Ltrs capacity complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe etc set in cement mortar, 150mm bore pipe complete all as specified and directed.

M&L for RCC. pipes 150mm bore, Class NP2 laid, jointed and tested complete with collars complete all as specified & directed.

M&L for concrete bed to drain pipes including including forming cradles after they are laid and tested in cement concrete 1:4:8, type D2 (using 40mm graged stone aggregtaes) for 150mm mm dia pipe work in foul position complete all as specified & directed.

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height complete all as specified and directed. .

M&L for rendering 15 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed. Note:- Water compound shall be measured and paid separately

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items complete all as specified and directed:-

(a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (c) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (d) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron ( +10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (e) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (f) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed.

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed:-

One light, fan point controlled by one switch

One 5 Amp independent socket point controlled by one switch

One 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.93 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-

S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed

S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F modular fan step regulator 120W, 2 module complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.102 above but SPN 32-40 Amps, 240 V

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed

S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 100 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed

S&F MCCB 100 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed

S&F metal clad box enclosure with socket plug top and MCB SP 20 Amps flushed on wall mounting enclosure with 2 pin and earth plug socket complete all as specified and directed

Taking down fan ,sealing cable end,dismantling blades and removing fan and blades to store in safe custody and refixing/hanging in only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed

S&F LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:-Havells Cat Part No LHEXBLP7PN1W020, 4 feet/ Bajaj cat part No BCLSB 20 WH/ CG Cat part No LCTC-18-CDL or equivalent make as specified in Appx 'C' of list of makes

S&F LED Bulk head fitting 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make:- Havells cat part No LHEXCGP7UN5W013/BAJAJ cat part No BIBWP10WLED /CG cat part No LBH-10-CDL or equivalent make as specified in Appx 'C' of list of makes

M&L for concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

M&L for concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed . Make:- Havells Cat Part No LHEXBLP7IN1W009/Bajaj cat part No BCLSB10WH/ CG Cat part No LCTL-9-CDL or equivalent make as specified in Appx 'C' of list of makes

Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 50 sqmm, 3.5 core complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and directed.

M&L for sand cushioning in trenches for the cable complete all as specified and directed

Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr from starting point complete all as specified and directed

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250mm x 150mm x 40mm complete all as specified and directed.

S&F in replacement of GI pipe light grade 50mm bore, ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed.

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make:-Havells Cat Part No GHWAMGTWH025) or equivalent make as specified in Appx 'C' of list of makes

S&F electric water heater (Geyser) ISI marked 50 Ltrs capacity AC 230V, 5 star rating branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make-Havells Cat Part No GHWAMGSWH050 or equivalent make as specified in Appx 'C' of list of makes

S&F exhaust fan, Metal body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed .

S&F exhaust fan, Metal body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed.

S&F wall mounted fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed.

S&F Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed .

S&F ceiling fan 1200 mm sweep metallic white colour with 5 star rated with brushless direct current motor (BLDC), single phase and connecting up including provision of cable from ceiling rose or connector to fan and including hanging fastner/clamp complete all as specified and directed.

SAGAR MOTOR AND TRACTOR CO

v k builder

M/s VIKAS TRADERS

siddhant construction

m/s mohansingh

HAFEEZ CONSTRUCTION

m/s mahendra kumar khare contractor