Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC 25 1 SIMRA P O KIDWAI NAGAR KANPUR UP 208011 | KANPUR | KANPUR | UP | 208011 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹22.0 L+₹56,971.90 (2.65%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 |
Tender Value
₹22.8 L
EMD Value
₹45,640
Closing Date
1 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanpur
GE I R and D Kanpur DMSRDE Complex, GT Road Kanpur 208013
SPECIAL REPAIR TO R and D HOUSE P-12 DIRECTOR BUNGLOW AT TRANSIT FACILITY DMSRDE, KANPUR.
2022_MES_554792_1
8297/E8
Open Tender
Civil Works
Item Rate
180 days
GE I R and D Kanpur
As Per NIT
8 documents required · 8 mandatory
₹500
GE I R and D Kanpur
₹45,640
Yes
26 Nov 2022
28 Sept 2022
3 Nov 2022
28 Sept 2022
1 Nov 2022
17 Oct 2022
28 Sept 2022 - 11 Oct 2022
Amount
Demolition of existing roof treatment such as mud phuska/lime concrete/PCC padding etc from roof complete all as specified and directed.
Removal of demolished material obtained from item no 01 above to a distance exceeding 250 metre but not exceeding 500 metre and deposited where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
M&L for cleaning the roof surface by wire brushing and watering and applying a coat of cement slurry at the rate of 3Kg/Sqm on the roof surface complete all as specified and directed.
M&L for PCC 1:2:4 type-B0 nominal mix (using 12.5 mm graded crushed stone aggregate) as in padding/levelling course over roof surface finished even & smooth without using extra complete all as specified and directed.
(a) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight of 3.0 Kg/Sqm with non wovenpolyster fibre as reinforcement on primed surface by torch application with side over laps & joints over laps etc as per manufacturers instruction. (c) M&L for providing test with filling of water over roof slab continuously for 48 hours all as secified and directed. (d) M&L for finishing of top surface by two coat of aluminium paint over a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufacturers instruction. (e) M&L for providing template of size 600 x 450 mm to each bldg where roof treatment is carried out with marking CA No, date of roof treatment, expiry date, etc all as specified and directed.
Demolition of Brick work built in cement morter as in drains etc complete all specified and directed
M&L for brick work with old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
All as per above Ser ITEM No 7.00 but except bricks. Note :- Old serviceable bricks obtained from demolition shall be reused.
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cm 1:6, complete all as specified.
Demolition of cement concrete in ground floor and paving n exe 15 cm thickness (below or above ground level) .
M&L for 75mm thick PCC (1:3:6) type C-2 as in plinth protection & finishing the surface even & smooth without using extra cement complete all as specified & directed.
M&L for 18 to 20mm thick machine in cut kota stone slab (approved size) flooring over and incl 15mm thick cement screed bed in cement mortar 1:6 and jointed with neat cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polishing including dismantling old stone slab, complete all as specified and directed.
M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring, finished even and smooth with using extra cement.
S&F Glass dividing strips 3mm thick and inserted in position to confirm design with width of strip 38mm.
M&L Cement concrete 1:5:10 Type E2(using 40mm graded stone aggregate) in foundations, filling and mass concrete as in sub-bases floors and pavings finishing surfaces of concrete even and rough to receive the topping layer complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed
M&L for Providing cement concrete 1:2:4 type B-1 in roof kerbs or mud stops, gola, rounded, flat or chamfered on edges ,complete all as specified and directed.
M&L PCC type B-1 (1:2:4) 20 mm graded Agg as in cills and other similar bands,coping,bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) tank and removing the same from the premises complete all as specified and directed.
M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in slabs, supported on walls, beams and columns in floor, roof, landing and in shelves for slaps and the Chajjas etc like complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.
M&L for precast cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) and set in Cement Mortar (1:4) as in louvres and jallies, 25mm thick (measured solid) including all mouldings, necessary formworks and reinforcement and dismantling existing RCC jallies in any description all as specified and directed.
All as per ser item No 21.00 above but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces
S&F mild 10 mm dia and over deformed TMT bars cut ot length bent to shape required including cranbing, bending spirrally, hooking ends and binding with and including mild steel wire annealed net less than 0.9 mm dia or securing with clips all as specified
All as per ser item No 23.00 above but 6 to 8mm dia.
Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping).
Taking down old cement plaster from brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) mixed with water proofing compound @ 2% by weight of cement by using scaffolding upto the 15m height complete all as specified and directed.
M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces of walls in cement mortar (1:6) including finishing the surface even and smooth without using extra cement complete all as specified & directed .
M&L for rendering 5mm thick on fair faces of ceiling surfaces in cement mortar (1:4) including finishing the surface even and smooth without using extra cement by using scaffolding upto the 15m height complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and and applying two coats of plastic paint over a coat of primer incl 1mm thick wall putty complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including 1mm thick wall putty complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceilings and applying two coat of oil bound distemper Over a coat of primer incl 1mm thick wall putty complete all as specified.
M&L for complete removal of old treatment, preparation of surfaces of walls and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm incl 1mm thick wall putty complete all as specified and directed.
M&L for complete removal of existing treatment by brooming down or steel wire brushing, scrapping down smoke, mass, efflorescent salt and oil and greesy spot etc. washing rubbing down distemper surfaces and applying birla white putty 1mm on wall even and smooth surface and applying two coat of plastic paint over a coat of primer (of approved quality and tint) on wall using painting roller, complete all as specified and directed.
M&L for complete removal of old plastered ceiling surface and applying two coats of oil bound distemper including 1mm thick wall care putty complete all as specified and directed.
Dismantling floor and Wall tiling including cement mortar bedding (but backing) removing seviceable to store and rubbish off the premises complete all as specified.
M&L non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified.
M&L for glazed ceramic coloured tiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match shade of tiles in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified complete all as specified.
M&L for Virified Ceramic tiles light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including Screed bed of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified.
All as per ser item No 39.00 above but in skirting.
M&L for 15 to 20 mm thick granite stone slab of any type with table rubbed fand polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including dismantling old stone slab complete all as specified and directed.
Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each complete all as specified & directed.
Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 sqm but n exc 4 sqm in each complete all as specified & directed.
Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each and refixing in the same opening.
M&L for mild steel framed work as in door chowkhat of angle iron including necessary cutting and welding conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.
S&F Second class hard wood Palin, solid, straight as in chowk at and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 40mm thick factory made Flush shutters, soild core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.
S&F 19mm thick Flush shutters, solid core construction, with block board ISI marked confirming to IS 1656-2004 with latest amendments & pasted 0.90mm thick mica sheet both side adhesive used Phenol and pressed by hot pressed on both face of approved shade & colour incl taking down old board of any type complete all as specified and directed by Engr-in-charge.
S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F 50 mm size brass butt hinges medium weight cold rolled.
S&F 100mm size mild steel butt hinges medium weight cold rolled.
S&F 75 mm size stainless steel butt hinges medium weight cold rolled.
S&F 40mm Continuous (piano) hinges, Mild steel bright finish or electrogalvanised.
S&F 125mm long extruded aluminium alloy handle.
S&F 150mm long brass handle, oval type, stove enamelled black complte all as specified.
S&F 75mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified.
S&F 200mm long brass barrel tower bolts, stove enamelled black, with bright bolt and fixed all as specified.
S&F 300mm brass sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F hasp & staple, aluminium 100mm size complete all as specified and directed.
S&F magic eye (door sight viewer) for doors complete all as specified and directed.
S&F floor door stopper of aluminium body & tongue over all length 140mm aluminium with hard drawn steel spring all as specified and directed.
S&F in repairs 150mm ,mild steel ordinary rat tail rod pattern springs including roller and roller plate complete
M&L for small fitting such as door and window stops article n exc 200 cu cm each in 2nd class hard wood.
S&F mild steel work as in holdfasts, knee piece and similar small article confiraming to Fe 410-0 or Fe 310-0 complete all as specified
S&F Anodised aluminium powder coated window and ventilator shutters, sliding/openable type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
S&F Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Standard section of powder coated aluminium grill having weight not less than 1.60 Kg/Sqm fixed to aluminium Frame with suitable C channel and screw complete all as specified.
Cutting holes in brick wall built in cement mortar of cement lime mortar for inserting holdfasts and making good/dismantling portions in cm 1:3 or cement concrete 1:2:4 type B1 as required for wall exc half brick but not exc one brick complete all as specified.
S&F for framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes,MS flats, framed guard bars & similar work etc complete conforming to Fe 290 Gde-E-165.
S&F 4mm thick Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 4mm thick Complete all as specified & directed.
S&F 4mm thick figured glass pinheaded type and glazing with oil putty in squares not exceeding 05 sum in each pane complete all as specified and directed.
S&F Stainless steel wire cloth 0.50 mm nominal dia and average width of aperture 1.40 mm complete all as specified and directed .
M&L for Preparation of new wood surface of any description over 10 CM width or girth and applying two caots of polishing over a coat of pink primer complete all as specified.
M&L for Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified.
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed.
Taking up or down 25mm dia steel tubing and connections, including cleaning for refixing or removal to store if required complete all as specified and directed.
S&F 15mm bore galvanized iron water tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.
S&F 20mm bore galvanized iron water tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.
S&F 25mm bore galvanized iron water tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.
Cutting chases, pinning in , for concealed water tubing on brick walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth.
S&F in repairs 15mm bore bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule all as specified. Make : Prayag Cat No 9806.
S&F in repair 15mm dia conealed stop valve, cast copper alloy chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions all as specified. Make : Prayag Cat No 9891 complete.
S&F in repair 15 mm dia L-bend wall mixer for bathroom, chromium plated brass fancy type with all connection slieves, capstan head, scrwed down complete all as specified. Make : Prayag Cat No 9880.
S&F in repair 15 mm dia wall mixerfor hot and cold water for sink, chromium plated brass fancy type with all connection slieves, capstan head, scrwed down complete all as specified. Make : Prayag Cat No 9871.
S&F in repair 15 mm bore centre hole basin mixer for hot and cold water for WHB complete all as specified and directed. Make : Prayag Cat No 9350.
S&F in repairs, 15mm bore angle valve chromium plated, fancy type complete all as specified and directed. Make : Prayag Cat No 9810.
S&F in repairs, vitreous china table top wash hand basin, white, flat, back size 550x 400mm, incl cutting for and pinning in ends of brackets or erecting stand, including Waste coupling, waste down pipe all as specified and directed. Make : Prayag "Cat No 4715".
S&F in repair vitreous china one piece floor mounted western toilet commode with P or S trap including provision of cement concrete bedding(Including flushing cistern and flush pipe) but including, making connections and demolition of concrete/lime concrete bedding for taking out existing broken squat pan complete all as directed as site. Make : Prayag Cat No 4360.
S&F in repairs sink without drainage board made of stailess steel 1 mm thick kitchen or laboratory with olugs, washers and wastes; incl bedding in cemnt mortar to dwarf wall or incl fixing cantiliver brackets and sonnecting union to pipe overall size 915mm x460mm, blowl size 410mm x 330mm x 160mm complete including waste coupling and waste pipe complete all as specified and directed.
S&F PVC conneciton 450mm long, 15mm size with PTMT nuts complete all as specified
S&F in repair towel rack stainless steel with brackets complete all as specified and as directed. Make : Prayag Cat No BA-03.
S&F in repair kitchen plate rack made of stainless steel 1 mm thick of size 900 x600x250 mm, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair PVC cabinet mirror. Make : Prayag Cat No BA-551.
S&F in repair corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge.
Dismantling water tanks in any type and in any position exc 250 & n. exc 500 ltr capacity.
S&F 500 Ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified (Make : Sintex, with ISI Marked).
S&F Ball brass 20mm bore valve, high pressure, with polythelene float & flynut complete, screwed for iron pipe or brass ferrule and fixed.
S & F in repair chromium plated shower rose 150 mm size with arm, any type, including fixing to steel pipe or union, complete all as per specified and as directed. Make: Prayag Cat No BS-79S.
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.
S&F 110mm PVC (SWR), Junction single, (Single T) equal or unequal), fixed with solvent cement, with oval access door, complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F PVC bend (any radius) diminishing pieces or tapers (larger bore measured) 75 mm bore.
S&F PVC vent cowl 110 mm bore.
S&F in repair gun metal globe or gate valve with iron wheel screwed both edns for iron pipe of 20 mm dia.
S&F 25mm thick stainless steel curtain rails with brackets and complete all as specified and directed.
Supply only stainless steel curtain knobs fancy type fixed with sides of curtain rod complete all as specified and directed.
Excavation in trenches n.exc 1.5m wide and n.exc 1.50m depth, for foundation etc. and getting out in any type of soil.
Returning filling in excavated approved earth in to trenches around pipe etc after laying of pipes and testing complete including watering and well ramming in 25 cm layers.
Removing surplus soil to a distance exceeding 1.50KM and n.exc 5KM , depositing where directed at a level n exc 1.5 m above the starting point complete all as specified.
Demolition and breaking up drain pipe of any type and size, set in cement mortar, in foul position.
M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and completely sorrunding around the pipe with concrete after they are laid and tested for 150 mm dia SWG pipe complete all as specified & directed.
M&L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified.
Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 110 mm bore drain pipe.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.
Point wiring for one light point/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. (Make of Cable : L&T, Havells, Plaza) and Make of Conduit : Plaza/Havells/Kamplast
All as per srl item No-122.00 here in above but upto ceiling height and on surface at ceiling.
All as per srl item No-122.00 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl conduit.
All as per srl item No-122.00 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.
All as per srl item No-122.00 here in above but for one 5A socket outlet on the same board controlled by one switch.
M&L for switch piano flush button single pole one way 5/6 amps 240 volts. Make :Cona/SSK/Leader
Switch piano flush button single pole one way 15/16 amps 230 Volts. Make :Cona/SSK/Leader
M&L for socket 5 amps 5 pin flush type, 230 volts. Make :Cona/SSK/Leader
M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts. Make :Cona/SSK/Leader
M&L for ceiling rose surface bakelite 3 terminals. Make :Cona/SSK/Leader
S & F Lamp holder insulated body with back plate for dome batten fittings.
Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required or directed by engineer-in-charge. Make :Cona/SSK/Leader
M&L for bell push flush button single pole one way 5 amps 240 volts. Make :Cona/SSK/Leader
M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified. Make :Cona/SSK/Leader
S&F in replacement of wall mounted LED light fittings 20 watt, 6500K, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed. Make : Wipro/Havells/Phillips/Bajaj
S&F in replacement of LED bulk head fitting with opal diffuser min 10 Watt, 6500 K, IP-65, with efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed. Make : C&S/Havells/Phillips/Bajaj/Wipro
Supply and fix in replacement of High power LED street light 25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as spfd. Make : Havells/ Phillips/ Bajaj
M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FR) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed. Make of Cable : L&T, Havells, Polycab and Make of Conduit : Havells/Kamplast/Polycab
All as per srl item No-16 here in above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit .
S & F in replacement of LED post top lantern 35/40 Watt warm white made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP-65 protection including fixing of GI pipe of suitable dia dia, 300 mm long light grade, partly embedded on column of gate with fixing arrangement complete and making electrical connection complete all as spfd. Make : C&S/Havells/Phillips/Bajaj/Wipro
S&F in replacement of LED mirror light fitting min 10 Watt Watt,1' long, with efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed. Make : C&S/Havells/Phillips/Bajaj/Wipro
S & F VTPN distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link, confirming to complete with one MCCB 4 pole 415 Volts 100 Amps, 4 pole rating with rupturing cap 26 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed.
Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
M&L for MCB single pole 240 volts 5 to 30 amps, with rupturing capacity 10 KA using thimbles of required size. Make: Legrand/Havells/ABB/L&T
M&L MCB single pole & neutral 240 volts 30 to 63 amps,with rupturing capacity 10 KA using thimbles of required size. Make: Legrand/Havells/ABB/L&T
M&L for single pole and neutral enclousere with a top pin, earth plug and socket copmlete with one SPN MCB 25 Amps, 240 Volts. Make: Legrand/Havells/ABB/L&T
Supplied and fixing in replacement PVC conduit by Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade of size 25 mm dia including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including Cutting & Chasing required on brick wall not exceeding 10 CM girth for concealed conduit wiring and making good to disturbed surface with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed.
M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion.
Supply and fixing in replacement of Earth contineuity conductor or main earthing lead fixed to wall on batten or cheses or buried in ground or drawn in conduit /pipe or fixed to VTPN as requried or directed by Engr in Charge
M&L for Preparation of old wood surface of any description over 10 CM width or girth and applying two caots of polishing over a coat of primer complete all as specified.
M/S UNIQUE ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .