Regarding beautification and external development of vending zones/kiosks at various places under Ghaziabad Municipal Corporation area and fixation of rates for electrical work and sanitary fittings in toilets.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes.110 mm diameter

S/L of stone ballast 22.4 to 53 mm size with stacking for measurment etc all complete as per the direction of engineer in-charge .

Supply and fixing of Kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 20 mm base coat (bedding) of 1:4 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work

Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).using 50 % white and 50 % gray color cement medium shade placement DSR 2023/11.20.2

Supply and fixing Galvanized corrugated ironroofing in position including supply of allmaterials, labour, Tools &plants etc. requiredfor proper completion of the work andincluding wastage.0.63 MM THICK

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for the proper complition of the work. saplings of girth upto 30 ems. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared

Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint andone coat of approved superior quality readymixed paint or varnish including supply of allmaterials, labour, Tools & plants etc. requiredfor proper completion of the work. Paint to beused should confirm the ISi no. 103-1950.As in item (641) above but for every coat afterfirst coat.one prime coat & two coat paint.

Providing and fixing 1mm thick M.S. Sheet garge door with frame of 40x40x6mm (1½"x1½"x¼") angle iron 3.15 mm (1/8") thickM.S. gusset plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete.Using M.S. Flat 40x6 mm (1½"x¼") for diagonal bracings and central places.as per pwd sor 2022 si no-10.11 b

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consistingoffollowingoperations:Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surfacebefore treatment.Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS 2645 andapproved by Engineer-in-charge.Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth ofapproved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.

Providing and injecting chemical for preconstructional antitermite treatment and creating and chemical barrier under and around the coloumn pits wall trenches bascement excavation top surface inplinth filling juction of wall and floor, along the external per meter of binding expansion joints surrounding of pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measurd as per I.S. 6313(part II 1981) Aldrine emulsifiable concentrate or any other approved material such as Hepthachlor of chlordance will be used. The rate of application of chemical emulsion shall be as follows :-1) Treatment for massonary and foundation 5 lites 1 per sqm 2) Back fill in immediate contact with foundation 7..5 lites per sqm 3) Treatment of surface of plinth filling 5 lites per sqm 4) Treatment of soil along external permeter of Building 2.25 liter per linear meter of the perimetr wall 5) Treatment of soil under external permeter 5 lites per sqm