Conversion of LT Installation 40 HP to HT Installation of 110 KVA at KSSCL Chickkaballapura under self-execution

supplying RCC pole 9Mtr long 150 KG WL (dwgNo bescom/ gm/QS&S /02-dtd 24/11/2018as per TS 785 material code 200106

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing IN hard soil

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

Supplying pre strussed tubler spun pole 11Mtr long 500KG WL (dwgNo bescom/ gm/QS&S /45-dtd 24/11/2018as per 13158:1991) material code 200120

Digging of Pit 2.2 Mtr depth for erection of 11 Mtr Long RCC/PSCC supports as per approved Drawing

Erection of PSCC Pole 11 Mtr Long 365 Kg WL in a pit of 2.2 Mtr depth( P no 44 Item No 32.2.04)

11 kV, Horizontal Cross Arm - Mild Steel (MS) (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018 Material code 279020

11 kV, Horizon tal Cross Arm - Galvanised Iron (GI) Pno 3 Item No 11/2.02) Material code 220020

11 kV, Special 3 Pin Cross Arm - MS(Dwg No. BESCOM/GM/QS&S/03 Dtd 24.11.2018 ( Pno 3 Item No 3/13.2.03) Material code 279013

11 kV, Special 3 Pin Cross Arm - GI (Pno 3/14.2.04)Material code 280013

LT 4 Pin Cross Arm - GI ( Pno 4 Item no 16.2.06)Material code 280014

Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing

LT ST Support 50x6 mm Flat - GI ( Pno 4 Item No 20.2.10) Material code 280091

HT ST Support 50x8 mm Flat - MS (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) Material code 279092

Fixing of HT/LT Single Top Support

Spiral Earth Electrode Item code 281683

Fixing of Earth Guard Stirrup

11 kV, Cross Arm with HT Top Support (glass reinforced Material code 279090

Fixing of HT/LT Single Top Support

RCC Pole Clamp - MS(Dwg No. BESCOM/GM/QS&S/30 Dtd 24.11.2018) Material code 279523

Fixing of 4 Pin double cross arm including Brace and Insulator

GUY set complete material ( Pno 5 Item No 39 to 46 total 8 Items Mterial code 279650

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

11 kV Ceramic Pin Insulator (Shell only)11 kV GI Pin for 11 kV Ceramic Shell Insulator Material code 283005

11 kV GI Pin for 11 kV Ceramic Shell InsulatorMaterial code 283040

Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM Material code 284108

Stringing of Conductor (including pin binding, providing jumps, dead ending, etc.

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM Material code 281008

Distribution Transformer 250 KVA- 3 Phase, 11kV/433V - Stacked (CRGO) losses confirming to 5 Star rating as per IS-11171 Core with Oil as per IS-1180 (Part-1): 2014 CABLE ENTRY TYPE( Pno7 Item No113.13.09)

Erection of Transformer & StructuresErection of 200 - 250 kVA Transformer

LT Protection Kit (Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018)( Pno 9 Item No 133.17.01) Material code 301107

LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal)Dwg No. BESCOM/GM/QS&S/08 Dtd 24.11.2018 Material code 301056

Fixing LT Distribution box for 100/250/500 kVA DTC (Excluding wiring)

LT Distribution Box for 100/250 kVA DTC with MCCB's (SMC) Material code 301060

10 kV, 5 kA Lightning Arrester Polymeric type with ground disconnector Material code 302002

11 kV, HG Fuse Unit with Solid Core Insulator(Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) Mterial code 3021225

11 kV, 400 Amps DoubleBreakGOS(DwgNoBESCOM/GM/QS&S/22 Dtd 24.11.2018 Material code 280100

DP Set (2 Pole Strucrure Kit) as per IS-1977For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9Mtr long 300KG WL -GI) Material code 2800100

Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing Structure Materials, Erection of Poles etc., complete for mounting of Transformer as per approved drawing

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-709Part-1, Armouring strip thickness and resistivity as per I3975(185Sqmm, 3.5 Core, (25 GI Strips - 4 x 0.8 mm) Material code 287214

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-709Part-1, Armouring strip thickness and resistivity as per I3975(95Sqmm, 4 Core, (17 GI Strips - 4 x 0.8 mm) Material code 287212

Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any)

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed.

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as perIS7098(Part2)Armouring wires dia and Resistivity as per IS-3975 Material code 287400( 95 Sqmm, (54 GI Wires - 2.5 mm Dia)

Transporting Cable from Store to work spot including loading and unloading (including Crane and other equipment charges if any)

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

Heat Shrinkable Indoor Type Cable Termination Kit for PILC Cable3x95 Sqmm Material code 288332

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable3x95 Sqmm Material code 288332

Making and Fixing pot head for HT Cable onlyHeat shrinkable Type Terminations3x95 to 3x150 Sqmm

11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised SpecificationMaterial code 358351

11 KVA load breake switch with HT cable incoming and outgoing arrangements Material code 506492

Erection of HT metering Cubicle on Platform

GI Pipe B - Class as per IS-GI Pipe - 50 mm DiaMaterial code 768044

HDPE/PLB Pipe 50/42 mm Material code 286003

Jelly Spreading (20-25 mm) : Supplying and providing jelly in thestation yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineerin-charge of works as per the standard procedure.

Spreading of Stone Dust : Supplying and providing stone dust in the station yard or wherever required including watering, ramming, consolidating and dressing. The rate includes the cost of material, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer-in-charge of works as per the standard procedure.

transformer , metering , LBS box provided foundation taken KPWD civivl SR

transformer sub station fencing taken using 6 SWG GI chain link fencing with 2100mm x 40 mm x 4 mm thick squire tube including cwelding digging of holes in soil with GI bolt & nuts etc

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.

supplying and fixing moulded case circuit breaker (MCCB)over the existing wood /panel board using neccessory screws bolt,nuts neccessory phase temprature hnadle and wiring complete .protection of over load and short circuit in thermal magnetic release micro proccessor release shall have earth fault as per IS-13947 ( 1cu=100% 1cs in 4 pole MCCB . mccb shall be provided with double insulation between front contacts to avoid any accident contact with live current carrying with path with the front cover open multi pole breakers shall be designed to break all the poles and they shall have single mechanism

four pole 125 A 25 KA

four pole 160A 25 KA

four pole 250 A

four pole 320-400 A 50 KA

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve indicator ON/OFF energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899 6-32Amps TPN Make:Schneider/Siemen/ABB/Equillvalant 6-32 A SP

supplying and fixing Earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroler based digitel readout of percentage leakage current programable dely/auto/manual reset facility suitable to mount on Din rail/flush mounting on panel board

supplying and fixing wiring rotary switch suitable for V/M

supplying fixing and wiring 3 Phase Digitel Ammeter Voltmeter

supplying and fixing LED type panel board indicating lamp with required colour suitable for 230440VAC 50Hz 12/24V DC

supplying fixing and wring 1000/5 A 5V to 1600/5A 15VA buden class 1 cureent transformer

supplying and fixing metal clad socket set of TP&N AND Earth plug and socket for incorporating Sp and TP mcb ( without MCB) the entire plug and socket shall be mounted in a thermoplastic /powder coated metal box and wired completely

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring as per IS-694:1990 and confirming to GTP of GROUP-A. 1.0 sqmm Make:polycab/RR Cable/KEI/Finolex wincap/Equilvalent

1.5 sq mm / for control wiring

4 sq mm / for control wiring

6 sq mm / for distribution system

10 sq mm / for distribution system

16 SQ MM / MCCB distribution

brass cable gland ( Pno 25 ,I, 689-70.02) size 32 mm

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode.The funnel should be enclosed in a CC chamber of 400x400x400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and

GI/Copper strips for grounding connections, using necessary fixingmaterials as required

25 x 3 mm GI strip

25 x 3 mm Copper strip

600x600x3 mm GI plate

600 x 600 x 3 mm Copper plate

suppying and intalation is a position testing and commisioning 6 KG fire estinguisher ammonium phos phate powder -50 stored pressure type hight 435 mm diameter 160 mm with stand

supplying four bucket stand along with bucket

supplying Hand gloves

supplyoing FIRST AID box complete

supplying FIRST AID chart with lamination complete

preparing entire campus electrical drawing with taken electrical inspectorate approval etc

SUPPLYING 250 A 4x30x10 mm aliminium strips A rated 3 phase with nuetral busbar using required capacity electrolytic aliminium strips coverd with heat shrinkable coloured PVC sleave mounted on phenolic /FRP/DMC insulator in existing panel board the bus bar shall have suitable holes for termination of the incoming and out going cables as per IS specification with neccessory bolts , nuts and washers etcsize 250A

supplying and fixing moulded case circuit breaker (MCCB)over the existing wood /panel board using neccessory screws bolt,nuts neccessory phase temprature hnadle and wiring complete protection of over load and short circuit in thermal magnetic release micro proccessor release shall have earth fault as per IS-13947 ( 1cu=100% 1cs in 4 pole MCCB . mccb shall be provided with double insulation between front contacts to avoid any accident contact with live current carrying with path with the front cover open multi pole breakers shall be designed to break all the poles and they shall have single mechanism capacity FOUR POLE 160 A 25 KA

APFCR PANEL Supplying fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase 400/440 volts gradefor power factor improvement of rotating machineries like induction motor Make:Trinity/Schneider

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve indicator ON/OFF energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60899 6-32Amps TPN Make:Schneider/Siemen/ABB/Equillvalant

Supplying and fixing Power contactor with NO/OFF contactor on existing wood/Panel boards using necessary bolts nuts washers and wiring etc complete with AC-3 Rating and as IS-13947 22- 25 Amps Make:Schneider/Siemen/ABB/Equillvalant

supplying fixing and wiring automatic power factror controler circuit fully static unit control by by 14 stage microprosser operatorrelyas LED display self programing functionfor power stagesand operating logic checking facility for healthy efficiant of each ndivitialcapacitor bank measurenebt of network hormonics with indication whih limit values are exceeded comprehensive display with large three phase LED display long term memory for setting protection for over voltage . power factor cerrection fault and no voltage to connect /disconnect banks with automatic recognition and with standerd program

supplying and fixing LED type panel board indicating lamp with required colour suitable for 230440VAC 50Hz 12/24V DC

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring as per IS-694:1990 and confirming to GTP of GROUP-A. 1.0 sqmm Make:polycab/RR Cable/KEI/Finolex wincap/Equilvalent

2.5 sq mm / for control wiring

6 sq mm / for control wiring

b. 25 x 3 mm Copper strip.

supplying and crimping copper end terminal (LUG) 25 sq mm

brass cable gland size 32 mm

open system supplying heavy guage PVC conduit pipe confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws 19/20 mm dia 2 mm thick

25 mm dia 2 mm thick

Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box

25 mm deep Junction box

supplying and wiring adopting loop system in existing PVC conduit /casing caping using 2x1.5 sq mm ( phase & nuetral ) 1x1.0 sq mm ( Earth wire ) FRLS multi strand PVC isulated copper wire ( confirming to IS 694and latest amendments ) without control switch shall be fixed on the existing plastick sheet /gang box the other end of the wires shall be terminated with sufficiant loose length in awood/PVC round block complete for the each conduit Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

Two outlet in arow above 3 mtr upto 6 mtr from the tapping point to outlet via switch

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor esistance single core in open or concealed system of wiring with specified IS-694-2010 1.5 sq mm

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs,Machine/NF screws etc., complete. 10 -12 way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the10-12 module

18 module

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.6A one way switch

18 module

Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.6A one way switch

6 A two way switch

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. )6 A backlite cieling rose

pendent holder

batten holder

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS encloser 12 way SP& N double door

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required6 6 to 32 A SP MCB

6 to 32 A DP MCB

6 to 32 A TP& N

supplying ... feet PVC batten with integrated LED tube ... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220- 240V@ 50/60Hz & Power factor >0.9 along with CE approved . 2 years Warranty against defect working under standard electrical condition18-20 W

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior LED Floodlight 100W

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole LED Streetlight 40W

Supplying and Fixing of mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps, bolts, and nuts and wiring using suitable capacity wires.

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiringusing suitable capacity wire

supplying and fixing wiring Earth electrode for grounding of lifts , transformers ,, DG sets etc using 40 mm dia 2.9mm thick 2.5M long GI pipe with GI funel with mesh and suitable size reducer fixed on the top of earth electrode the funnel should be enclosed in a CC chamber of 400x400x400 with cast iron cover the eaerth electrode shall have stagered hile of 12 mm dia and the electrode should be coverd 150 mm all-round with alternate layers of salt and charcoal from the bottom of CC chamber the connection from the electrode is to be established though GI strips using GI bolts and nuts .

Supply and laying of following size Copper / GI strip including all fixing accessories for inside the building with all necessary interconnections with earth station and equipments. The cost shall also include the supply & installation of Heat Shrinkable PVC colored sleeves. end terminated with suitable copper lugs ,copper fixing hardware's,etc..25 x 3 mm GI tape

Supplying 100 A 4x30 x 6 mm alumimium strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required6 6 to 32 A SP MCB 5 to 32 A DP

Supplying and fixing minature circuit breaker including wring 6-32 A TPN

supplying and fixing multi funcional frequency meter with latest micro controller technolgy , ultra bright 4 digit LED display .from 30-500 V AC and optional or relay out put for high /low frequency and wiring complete

supplying fixing and wiring 50/5A to 400/5A 5 VA burden current transformer class 0.5 accurecy with tape wound ( P no 19 Item No 5.34)

Supplying LED type panel indicators suitable for 440 Volts AC .50Hz 12/24 VDC

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694-2010 1.5 sq mm

suppying fixing and wiring metal clad socket set of 2 Pole and earth plugs and socket for incorporating SP and TP mcb / without MCB the entire plug socket and socket shall be mounted in a themoplastic /powder coated metal box & wired completely

Additional 110 KVA power supply with LT to HT convertion with allied work at KSSCL chickkbalapur under- Self Execution