Improvement of Bituminous road and Paver Block at Radha Govind Street under Ward No-18

Labour for cleaning the work site before and after work etc.

Labour for site clearence before and after the work etc.

Tack coat on Cement concrete pavement (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.)

Tack coat on Bituminous surface (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Bituminous Macadam Grading (i) with VG-30 Grade Packed Bitumen (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Grading (i) (19mm nominal size)

Bituminous Concrete Grading (i) with VG-30 Grade Packed Bitumen (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.2 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects) Grading (i) material 13mm nominal size (Width varies from10' to 12'0")

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)

STONE CHIPS-LEAD-22KM

Earth work in Excavation in foundation trenches in ordinary soil (vide classification of soil item A ) and disposal of excavated earth as obtained to a distance up to 50 mm including all lifts, leveling, ramming the foundation trenches removing roots of trees, all complete as per approved design , building as per specification & direction of E/I.

Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve at quarry.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:1.5:3 (1 Cement : 1.5 coarse sand zone(III): 3 graded stone aggregate 20mm nominal size)

(i) Sand (Lead Upto 49 km)

(ii) Stone crusher dust (Lead 13 KM)

(iii) Stone Chips (Lead 22KM)

(iv) Earth (Lead 01 KM)

Good & Service Tax (GST)

Labour Cess