Providing Improved access to water through Household Connection in existing Water Supply Scheme Mohan Bhandarian Block Ajnala Distt. Amritsar. UNDER JJM NABARD XXVI

Amount

Cost of Repair of Control Panel Complete in all respects

Repair of Pump Chamber

Repair of 12.5mm thick cement plaster 1:4

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

REPAIR OF OHSR

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation

Cement concrete 1:8:16 With stone aggregates 40mm gauge.

First class Burnt Brick work laid in cement sand mortar 1:5 in foundation and plinth

12.5mm Thick cement plaster 1:4

Earth Filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cum layers including ramming, watering and consolidating upto 30 meters.

Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal for loading into wagon, trucks or boats within 15 Metres lead Qty as per Sr no 5-Sr no 1

Cement concrete 1:8:16 With stone aggregates 40mm gauge

Conglomerate floor 40mm cement concrete topping 1:2:4

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Providing & Fixing OHSR Gauge 15cm width Complete in all respects

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing.

Providing & Fixing PCC Fencing Poles With 6' height, 3" x 3" Top & 4" x 3" Base provided with 3 nos. hooks complete in all respects

Providing & Fixing D hook complete with MS bolt size 300 mm x18 mm as per standard drawing D-7 & Analysis of Rates A-9 complete in all respects.

Construction of foot paths with masonry toe wall& earth filling & concrete topping; inside water works as per standard drawing D-10 & Analysis of Rates A-11 complete in all respects.

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Providing and fixing in position CI Bib Cock(tap)(15 mm i/d)as per IS:210 with stainless steel spindle of approved make and Fixng of Nozzle to contro flow of water(to the approval of Enginer-in-charge Complete in all respect

Providing proposed water connections to household up to wall with providing ,laying, jointing, fixing, testing MDPE pipe line 15 mm i/d = 2.00 mtr(Below GL) and ISI Marked G.I. Pipe 15 mm i/d (As per IS 1239) B-Class approved make = 2.50 mtr (Above GL) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM Ferrule as per IS:2692 and 3" i/d clamp with CI Bib Cock 15 mm i/d as per IS:210 with stainless steel spindle of approved make complete in all respects. (Connection at Existing pipe line)

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications

PVC pipe 90mm o/d

PVC pipe 63mm o/d

P/F & Jointing and ISI Marked gun-metal peet valve (heavy pattern) as per IS-778 with hand wheels on G.I. Pipe lines laid in the ground or inside building including all carriage complete.

50 mm i/d Gun metal peat valve (heavy duty)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 6 No. With each of Size 0.6m x 0.6m complete in all respects

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 6 No. With each of Size 0.9m x 0.9m complete in all respect

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

Hand boring Horizontly for crossing of pipe under road or any other obstacle by Auger/Bocki method. Including excavation, stringing and jointing of pipe upto 160mm complete.

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing MDPE pipe lines 15mm i/d=4.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete. (Connection at New pipe line)

MS Sign board painting & printing complete as per standard size of DWSS complete in all respects

Carriage of Sand & Bajri (Item No 4.4, 3 OHSR Part)

CONDITIONS :-

Item for which no rate or price has been entered in will not be paid for the Employer when execut6ed and shall be deemed covered by the other rates and prices in the Bill of Quantities.

Unit rates and prices shall be quated by the bidder in indian ruppees.

Where there is a discrepancy between the rate in figures and words, the rates in words will govern.

Where there is a discrepancy between the rate and the line total resulting from muluplying the unit rate by quantity the unit rate quoted shall govern.

Any item of work not included in the above contract schedule of rates and got done at the site of work; the same will be paid according to CSR-2010 subject to the premium or discount tendered by the contractor. In the case of non-schedule items, the decision of the Engineer-in-charge will be final and binding upon the contractor. In case any item which is a part of lump-sum rate is be deducted @CSR rates + Ceiling premium prevailing on the date of tender

The work will be carried out in accordance with PWD Book of specifications - 1963 edition with upto date amendments.

Approximate quantities are given in the contract schedule of rates and these can vary at the time of execution of the work. The payment will be made according to the actual work done by the contractor.

All amendments issued on the common schedule of rates 2010. up to the date of opening of tenders will be applicable on the contract schedule of rates.

Contractor should clearly quote his rates in figures & words. Conditional tender will be rejected.

All items and rates provided in the DNIT are subject to the footnotes give in CSR-2010

The Engineer-in-charge will have full powers to change the layout of the work covered in this contract if considered necessary.

No claim will be entertained form the contractor in case, any mistake in description rates or unit occurs in any item taken in this schedule while preparing this DNIT or on account of typing or comparison or over writing. The same will be rectified at any time as per common schedule of rates 2010 along with upto date amendments.

The arrangements of bricks at site of work would be done by the contractor at his own level from his own source.

For any other non-schedule items, the contractor will submit through Engineer-in-charge, the analysis of rates in triplicate based on purchased vouchers. A margin of 10% shall be allowed for material components and 21.5% on labour components and contractor shall produce photo stat copies of the purchase vouchers in support of his claim. The decision of the Engineer-in-charge/Competent authority in the matter shall be final and binding on the contractor.

All the extra items will be got approved from the competent authority and no premium will be allowed on non schedule item

Pavement for the carriage of material shall be paid as per the rates quoted by the tenderer.

Time period allowed for completion of work in 3 months.

If contractor allowed for completion of work within 7 days from the date of allotment, DWSS reserve the right to impose penalty or withdraw the work and propose action for debarring in future tendering or both; decision of Chief Engineer (North) shall be binding.