REPAIR TO OTM / PROCESS BLDG INCLUDING ROLLING SHUTTERS COLLAPSIBLE GATE, JOINERIES AND ALUMINIUM WORKS AT TECH AREA OF ARDE UNDER GE (I) RnD PASHAN, PUNE

Amount

Taking down hood covers of manually operated rolling shutters loose brackets plates or guide properly greasing, replacement of helical spring, for proper functioning of rolling shutter of size upto 10 sqm area and refixing covers in position after repairs complete all as specified and as directed

All as per item No 1 but size of shutter exc 10 Sqm but n.exc 15 Sqm of shutter

All as per item No 01 above but gear operated & area upto 36 Sqm

Taking down rolling shutter any type including top covers for carrying out repairs/replacement of worn out parts such as brackets guide shafting pulleys, gear wheels gear boxes and straightning partition side parts press button rails, tightening end clips, cleaning and greasing the partsfor smooth functioning including replacement of spare parts complete all as specified and directed :- Note :- Spare parts required for replacement shall be measured and paid separately as supply only (ii) The rate quoted shall be deemed to include for fixing of spare parts replaced. (a) Shutter area n.exc 10 Sqm

(b) All as per item No 4 but size of rolling Shutter area exc 10 Sqm but n.exc 15 Sqm

(c) All as per item No 4 but size of rolling Shutter area exc 15 Sqm

Supply only the following items (a) Heavy duty spring upto 35 cm long

(b) Heavy duty spring 35cm to 45 cm long

(c) Gear box set

(d) Gear wheel (steel/CI)

(e) Gear arm

(f) Shaft wheel with bearing

(g) Gear box handle

(h) Press button rall unit

(j) Side guide ( 12 guage)

(k) 25 mm dia & 150 mm long shaft with 25 mm inner dia bearing (2 Nos) for steel sliding door

(l) End clips

(m) Safety lever lock MS

(n) Partition patties 75 mm wide (mild steel strip)

(o) Heavy shafting pipe mild steel of 40 mm dia

(p) heavy shafting pipe mild steel of 50 mm dia

(q) Top Cover (18 gauge)

Taking down rolling shutter any type including top covers complete size of Shutter area upto 30 Sqm complete all as specified and directed.

Suppy and fix Steel rolling shutters, Thickness of laths 1.00 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete, push pull or manual type complete all as specified and directed.

Suppy and fix Steel rolling shutters, Thickness of laths 1.00 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and directed.

Taking down steel collapsible gate of any type and Area of collapsible gate n.exc 10 Sqm complete all as specified and directed.

Supply and fix collapsible steel gates top hung consisting of channel pickets, pivoted flat bars top and bottom runners brass handles etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

Dismantling of Mild Steel Work including doors, gates but excluding framed truss etc complete all as specified and directed.

Supply and fix Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other confirming to Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; including errection and fabrication also fastening and fixing complete all as specified and directed.

Taking down existing chowkats or frames of door (without taking of shutters from the frame) not exceeding 1.5sqm each Complete all as specified and as directed by Engineer-in-Charge.

Taking down existing chowkats or frames of door, window etc (without taking of shutters from the frame) exceeding 1.5sqm but not exceeding 4 sqm, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

Material and labour for providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete all as specified and directed.

Supply and fix in repair aluminium ( die cast body )door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg ISI mark complete all as specified and directed.

Supply and fix in repairs aluminium (die cast body) door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kgs ISI mark complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube Supply and fix in opening as per specification and drawing complete all as specified and directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed

Taking down shutter of size exceeding 1 Sqm but not exceeding 2 Sqm each, Complete all as specified and as directed by Engineer-in-Charge.

Taking down shutter of size exceeding 2 Sqm each Complete all as specified and directed by Engineer-in-Charge.

Supply and fix Mild steel flat iron as in hold fasts or similar small articles conforming to Fe-290 Gde E-165, Complete all as specified and directed by Engineer-in-Charge.

Material and labour for II class hardwood, Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated (II class hard wood), Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new wooden surfaces of width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of pink primer, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix extruded aluminium alloy handles, fabricated type anodised 125 mm size, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 125 mm long aluminium anodised barrel tower bolts of extruded section, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 mm long MS butt hinges medium weight cold rolled welded to steel frame / fixed to wooden and PVC frame with suitable screws, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium door stopper of size 60 to 75 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

Supply and fix aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolt and sliding bolt of extruded sections or cast aluminium alloy length of bolt 300mm complete all as specified and directed.

Supply and fix extruded Aluminium alloy handles, fabricated type anodised size 150 mm complete all as specified and directed.

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section, Complete all specified and as directed by Engineer-in-Charge.

Material and labour for repairing aluminium door by taking out frame alongwith shutter, fixing missing screw to wall, adjusting floor spring, repairing hook joints of frame , Hinges,tower bolts,handles and re-erecting in good working condition by necessary lubrication all as specified and directed by Engineer-in-Charge.

Supply and fix in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Providing and fixing Powder coated aluminium Frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per the directions of Engineer-in-charge.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 (micron) work for shutters of doors, windows & ventilators and partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete all as specified and directed by Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately).

Supply and fix 4mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane etc complete all as specified and directed.

Supply and fix Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apeture 1.40 mm and fixed with stainless steel wire staples etc, complete all as directed.

Dismantling false ceiling of any description, fixed in any position with nails / screws complete all as specified and directed by Engineer-in-Charge.

Supply and fix Armstrong Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles with Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Armstrong silhouette 15 mm face exposed grid colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5Kgs/Sqm with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per Sqm and need to be installed with Suspension system of Armstrong make (or) any equivalent complete all as specified and directed.

Providing & Fixing of Armstrong Mineral Fibre Acoustical Ceiling System with SIERRA OP (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm face exposed grid colour white having rotery stitching on all silhoutte type T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system and necessarey aluminium angle of Armstrong make, any equivalent complete all as specified and directed.

Supply and Fix in repairs partly panelled & partly glazed door single/double, leaf, using aluminium section Top - 19528, Middle - 19575, Bottom - 19530, Vertical - 19526 fixed with aluminium floor door spring, pivot including handlers, tower bolt etc, with particle board panels of 12mm thick prelaminated particle board with decorative choice lamination on both sides & 5mm thick plain glass having interlock (20939), Handle (20602) complete as specified & directed.

Supply and fix in repairs Aluminium powder coated ventilators partly fix and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/metre) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/metre), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/metre) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed by Engineer-in-Charge.

Supply and Fix mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to (Fe 290 Gde E-165), complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for 75 mm thick Cement concrete 1:3:6,type C1(using 20 mm graded stone aggregate) in plinth protections/ hard standing path etc finishing the surface even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC block masonry with solid blocks, exc 10 cm in width and setting CM 1:6 precast cement concrete block of type C-1 with 1:3:6 (using 20 mm graded stone aggregate), Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering 10mm thick on fair faces of brick work or block masonry or concrete surfaces in cement mortar 1:4, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over and including a coat of 1mm thick interior wall care putty and including a coat of primer, Complete all as specified and as directed by Engineer-in-Charge.

Dismantling stone slabs and tiles incl old bedded and pointed in any type of mortar any thickness & any description complete all as specified and directed.

Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) in sub base as in floors, sub floor etc complete all as specified and directed.

Material and labour for crushed sand cushioning below interlocking paver block including spreading and levelling complete all as specified and directed.

Material and labour for Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade complete all as specified and directed.

Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane size from wooden/metal frame, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing in repairs venetian blind vertical type with curtain slider with all fittings from standard manufacturers etc complete all as specified and directed by Engr-in-charge. Make : Vaima Pvt Ltd/Mark Ent/Pravi etc

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Rough cast wired glass, 6.4mm thick of area exc 1.00 Sqm and n. exc 1.50 Sqm and glazing clip with oil putty at any height including necessary arrangement complete all as specified and directed.

Supply and fix Mild steel chequerred plate, 8mm thick or over in thickness as in cable trench cover and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

SHRI SAI ENTERPRISES (BID ID -3381560)

S.K.HARAL (BID ID -3381574)

Rays Breakers (BID ID -3384557)

AJAY ENTERPRISES (BID ID -3385167)

M/S SAMRUDHI CONSTRUCTION (BID ID -3384828)

Sunil Constructions (BID ID -3385222)

M/S NILESH BUILDERS (BID ID -3384206)

M/s S.R lahoti (BID ID -3384216)