Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 CrAccepted-AOC AT PLOT NO 373 LANE NO 7 JAGANNATH VIHAR BARAMUNDA BHUBANESWAR 751003 | BHUBANESWAR | KHORDHA | ODISHA | 751003 | ₹3.2 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹3.3 Cr+₹11.7 L (3.66%)Rejected-AOC AT BARIMAL PO HATIBARI PS SUKINDA DIST JAJPUR PIN 755018 | JAJAPUR | ODISHA | 755018 | ₹3.3 Cr+₹11.7 L (3.66%) | L2 | Rejected-AOC L2 |
| 3 | L3₹3.4 Cr+₹17.6 L (5.50%)Rejected-AOC | ₹3.4 Cr+₹17.6 L (5.50%) | L3 | Rejected-AOC L3 |
| 4 | L4₹3.5 Cr+₹26.8 L (8.38%)Rejected-AOC | ₹3.5 Cr+₹26.8 L (8.38%) | L4 | Rejected-AOC L4 |
| 5 | L5₹3.5 Cr+₹31.2 L (9.77%)Rejected-AOC JHARSUGUDA | JHARSUGUDA | ODISHA | 768201 | ₹3.5 Cr+₹31.2 L (9.77%) | L5 | Rejected-AOC L5 |
Tender Value
₹4.4 Cr
EMD Value
₹4.4 L
Closing Date
31 Mar 2026, 5:00 pmClosed
Superintending Engineer, OTDC Ltd. BBSR
O/o The Superintending Engineer, OTDC Ltd. BBSR
Balance Work of 1st Floor and Periphery Development of Paryatan Bhawan
2026_OTDC_127413_1
BP-I/31/2025-26 Dt. 11.03.2026
National Competitive Bid
Civil Works - Buildings
Percentage
11 days
Bhubaneswar
As per DTCN
3 documents required · 3 mandatory
₹10,000
₹4.4 L
Yes
20 Sept 2026
19 Mar 2026
2 Apr 2026
19 Mar 2026
31 Mar 2026
19 Mar 2026
19 Mar 2026 - 23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Ground floor | |||||
| 2Providing partition of full height solid partition for in other area as per drawing with Aluminium frame 63.5x38.1 mm with 1.5mm thickness intermediates, verticals and horizontal (600mmx600mm) as shown in drawing and shall be fixed to floor, ceiling, walls etc. with suitable size of screws, plugs including making good to damages, with the cost of applying a coat of primer to exposed faces of the timber and fixing 9 mm thick.BWP ply both sides of approved make and quality confirming to IS 710 (Green, Century, Sylvon, Archid) over the frame work with screws at adequate intervals and fixing 1.0 mm thick Laminate both sides on ply (suede finish, green, century, Merino) with adhesive including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. | |||||
| 3Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make door closure having model no 8341, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. | |||||
| 4Supplying,fitting & fixing of 10mm thick toughened glass with eatching including cutting to sizes with cost of nails & putty including cost,conveyance & labour charges etc complete as per specification & direction of EIC. | |||||
| 5Supplying,fitting & fixing of cup-board make 19mm thick solid ply with two side panel, one bottom panel and a back panel framing with 1mm thick colour laminate. It should have two shutters with approved shade of laminate. The stutter should be fixed into the cabinet by auto shut hinges. All hardware should be of Heitich make etc complete as per direction of Engineer-in-charge. | |||||
| 6Providing and fixing Rollers blinds of MAC/VISTA brand as per the approved shade and design alongwith all the accessories including cost, conveyance, loading, unloading of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. | |||||
| 7Labour engaged for shifting of materials like (Almirah, Rack,Table,Chair,Godrej) etc complete as per specification & direction of EIC. | |||||
| 8Providing and painting two coats with plastic emulsion paint of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. | |||||
| 9Dismantalling and removal of old RCC from beam, column, roof slab,self, chajja etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge | |||||
| 10Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge | |||||
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
DTCN.pdf
Tender Documents • 1.67 MB
BOQ_585643.xls
BOQ • 5.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .