GE/U(N)-01/2024-25 PROVN OF ADDN/ALTN OF BLDG NO P-01 OF OR MESS AND PROVN OF REWIRING TO BLDG NO P-19 AND P-11 AT WEU UNDER GE (NORTH) UDHAMPUR

Amount

Demolition of cement concrete (un reinforced) as in ground floor and paving area of any type and any thickness, complete all as specified and as directed by Engr-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge.

Dismantling of wall and ceiling board (fibre/pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed by engineer in charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 square metre each complete all as specified and as directed by Engr-in-Charge.

Taking down chowkhats or frame exc 1.5 sq.m but n.exc 4 sq.m with shutter (without taking off shutters from the frame) and remove from sitecomplete all as specified and as directed by Engr-in-Charge.

Dismantling of plain or corrugated roof sheeting , thickness including roof covering etc complete all as specified and as directed by Engr-in-Charge.

Dismantling of structural steel work in any description complete all as specified and as directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-Charge.

Dismantling floors hearth and tiling of any description or thickness in floor/dado, apron, etc laid bedded and pointed in any mortar,complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed.

Dismantling water tanks of 1000 ltrs and removing to store, complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 complete all as specified and as directed by Engr-in-Charge.

Rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge.

Rendering 15mm thick on stone masonary surfaces or surface other than fair face of brick work in CM 1:4 finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge.

Rolled mild steel section of angle, tee, flats, and plates as in roof trusses, purlines, rails, etc and the like fixed with angle cleats and connecting plates including welding,Gde FE-410-0 or FE-310-0 complete all as specified and as directed by Engr-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etcfrom RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm and will be finished and rendered with 10mm thick cement plaster in Cement Mortor 1:3 using water proofing compound and finished even and smooth without using extra cement and the sand used for the same will be clean and free from any silt, organic matter and impurities, RCC and plastered surface will be wet cured for minimum period laid down in IS 456 & then allowed to dry and leakage checked by pointed test at least 72 hrs. After checking of leakages on dry plaster surfaces.

M&L for apply bituminous primer confiriming to IS -3384 @ 0.40 Kgs/ Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS -702@ 1.20kg/ Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150 mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20kg/ Sqm and blinded with fine sand in dry condition @ 0.50 kg/Sqm dusted over the bitumen coat. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

Removing any kind of debris/Demolished building material outside A-1 Def land including loading in truck and conveying day to day basis to beyond the lead included in the rates, including loading, unloading and stacking at the destination approved dumping point etc. complete. With all lifts and lead outside MD Land 1 to 2 Km distance, complete all as specified and directed by Engr-in-Charge.

Preparation of new or previously untreated surface of any description exc 10cm width or girth and applying two coats of aluminium paint over a coat of primer complete all as specified and directed.

Coloured vitrifired ceramic tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sq.m (min. size 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in CM (1:6) complete all as specified and as directed by Engr-in-Charge.

Vitrified ceramic tiles10mm thick, polished, coloured, light shade in pieces of required width cut out of 600mm x 600mm size, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and as directed by Engr-in-Charge.

Non skid ceramic coloured tiles 7 to 8 mm thick (sqare/ rectanglear) area of each tile exc 0.11sqm but n exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in Cement mortar (1:6) complete all as specified and directed.

Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm/450mm x 350mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base 15mm thick in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the sla bincluding rubbing and polishing complete

Kota stone slab 18-20mm thick in riser of steps, skirting , dado and pillar laid over 10mm thick rendering in cm 1:4 and jointed with pigment to match the shade of the sla bincluding rubbing and polishing complete

50mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even & smooth with out using extra cement incl making joints 10mm wide and 30mm deep at spacing n more than 2.5m and at corners at mandatory and filled with sealing compound grade A complete all as specified and as directed by Engr-in-Charge.

S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge.

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on vertical/inclined wall surface complete all as specified and as directed by Engr-in-Charge.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to complete all as specified and as directed by Engr-in-Charge.

M&L for frame work as in grills, guard bars railings etc conforming to Fe-290 Gde-E-165 etc complete all as specified and directed by Engr-In-Charge

Pressed steel frames for doors of size 165 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc,complete all as specified and as directed by Engr-in-Charge.

Cement concrete Type B2 1:2:4 in walls or retaining walls, in pressed door frame of any thickness, size or shape including pilasters, buttresses columns, pillars,boundary pillars and posts

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge.

S&F 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixing with wooden/steel beads, complete all as specified and as directed by Engr-in-Charge.

Sheet glass 4mm thick ordinary quality and glazing with beading/oil putty in square n/exc 0.5 Sqm each pane complete all as specified and as directed by Engr-in-Charge.

S&F for Steel ventilators, fixed type, with glazing bars complete all as specified and as directed by Engr-in-Charge.

Preparation of new plastered surfaces by using necessary compound of Altek/Birla white putty 1 to 1.2mm thick to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and as directed by Engr-in-Charge.

Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion white or tinted,complete all as specified and as directed by Engr-in-Charge.

Prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and as directed by Engr-in-Charge.

Preparation of new wooden painted surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of aluminium primer complete all as specified and as directed by Engr-in-Charge.

Preparation of new or previously untreated steel and iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and as directed by Engr-in-Charge.

200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed by Engr-in-Charge.

300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge.

150 mm size mild aluminium handles cast type anodised all complete all as specified and as directed by Engr-in-Charge.

100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and as directed by Engr-in-Charge.

300mm mild steel ordinary rat tail rod pattern spring including roller plate complete all as specified and as directed by Engr-in-Charge.

Floor door stopper of alumium body and tongue anodised with land drawn steel spring overall lengthof cover plate 140mm fixed with screw, complete all as specified and as directed.

S&F 1mm thick Mild steel sheet eaves gutters of 150mm dia, glvanised class 3, half round with rounded edges complete all as specified and as directed by Engr-in-Charge.

Mild steel cromium plated 20mm dia (curtain rod) with fixing brackets,stops,roller etc complete all as specified and as directed.

15 mm dia bore medium grade galvanised tubes Steel water tubing with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

20 mm dia , medium grade, galvanised tube Steel water tubingwith all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified and directed.

Vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, fixed in repair complete all as specified.

CP Towel Ring 200mm dia Fixed in repair complete all as specified and as directed by Engineer-in-Charge.

20mm dia brass chromium plated tubular towel rails, D type, 60 cm long between flanges Fixed in repair complete all as specified and as directed.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE

Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE

PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed. Make : Jaquar, Cera or equivalent as approved by GE.

Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE

CP brass grating 75mm dia, centre hole, complete all as specified and as directed.

CP brass grating 75mm dia, complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks three layer white (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and directed.(fixed in repair)

Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed. Make Parko cat part No 1527

PVC (SWR) Gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed.

S&F for 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors in repair etc complete all as specified and as directed.

S&F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls fixed in repair etc complete all as specified and as directed.

S&F for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors in repair etc complete all as specified and as directed.

S&F for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls fixed in repair etc complete all as specified and as directed.

S&F in repairs 75mm PVC (SWR) bends any radius etc complete all as specified and as directed.

S&F in repairs110mm PVC (SWR) bends any radius etc complete all as specified and as directed.

S&F in repairs 75mmPVC (SWR) branch piece, double (double Y) equal or unequal with access door etc complete all as specified and as directed.

S&F in repairs 110mmPVC (SWR) branch piece, double (double Y) equal or unequal with access door etc complete all as specified and as directed.

S&F for 75mm PVC (SWR) vent cowl etc complete all as specified and as directed.

S&F in repairs PVC (SWR) reducers etc complete all as specified and as directed.

Granite work with 20mm thick slab, table rubbed and polished, in steps, window cills, cooking platforms and like in single piece set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4) complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm bowl size 410mmx330mmx160mm, fixed in repair complete all as specified and as directed. Make: Neelkanth, Nirali

Sink wall mixture, brass, chromium plated, fancy type, with capstan head handles screwed down high pressure, with lettered 'hot' and 'cold', including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE

S & F factory made, heavy duty full body digital, paving coloured tiles of size 300 x 300 x 10mm thick for external use laid over and including 15mm thick screed bed or bedding layer in CM (1:4) including jointed with neat cement slurry and pointed in coloured tile grout to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge. Make :- Durastone of somany or equivalent in Bell/Nitco/Johnson/AGL/pavings of kajaria.

S&F in repair 18 mm thick prelaminated medium density fibre (MDF) boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws as in cup board, shelves, kitchen cabinet, etc, complete all as specified and directed.

S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repair, complete all as specified for modular kitchen, complete all as specified and directed.

S&F in repairs Stainless steel multipurpose bracket in wooden drawer/partitions for storing rations of various types made of 4mm dia stainless steel rods, fixed in side partitions etc fixed , complete all as specified for modular kitchen. Make : Usha shriram entp pvt ltd or equivalent, complete all as specified and directed.

S&F in repair Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen. Complete all as directed by Engr-in-charge.

Excavation over area not exc 1.5m deep in any type of soil and getting out complete all as specified.

Walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) including providing weep holes complete all as specified (PCC bond stone shall be measured and paid separately).

Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete, all as specified.

Hand packing (any thickness) of broken stone boulders at back of wall over arches etc and raising (or lowering) to the required label.

PVC pipe 110 mm dia low density of pressure rating 10Kg/Sqcm (in short lengths) fixed in walls as weep holes as in retaining wall complete all as specified.

Aluminium sliding window, ventilator shutter with chowkhat of powder coated, 5mm thick glass, stainless steel wire gauge for shutters, etc, without sash bars, aluminium sections (20076 weighting 1.608 Kg/m) (thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 5mm thick tinted glass, stainlee steel wire gauge for shutter three track (02 Nos shutter glazed & 01 No wire gauge) etc, complete all as specified and as directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket, and power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regtulators, sockets, tube lights etc. Removing materials to store for keeping of safe custody or removing from site for taking credit and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed by engineer-in-charge.

M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point/bell point controlled by one way switch, and wire to be drawn in and including concealed conduit of dia not less tham 25mm complete with all accessories including MS sheet metal 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. are to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm.

All as per item above but for one 3/5 pin socket 5 Amp on same board with cable of 1.5sqmm size.

All as per item above but for one 3/5 pin socket 6 Amp on independent board with cable of 1.5sqmm size.

All as per item above but for 3 pins socket outlet 16 Amps independent with 2.5 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed.

S&F Switch Piano flush type single pole 6 Amps One way, all as specified and directed .

S&F socket flush type single pole 6 Amps One way, all as specified and directed .

S&F for 2 in 1, 3 pin, 5 and 15 Amp flush type universal Switch socket combination complete all as specified and directed .

S&F stepped & flush type electronic fan regulator on the existing phenolic laminated sheet etc. as required.

S&F Ceiling rose, 3 terminal, PVC / polycarbonate, isolated body complete all as specified and directed .

S&F LED light fitting PLUTO NEO PANEL 2'x2' PLR 36 watt LED 857S environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong/grid/ceiling all as spesified and directed.

S&F Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old US tube light fitting 1x36W and taken in schedule of credit all as per the directed.

S&F for replacement of E-Lite LED Curve lighting fixture for mirror 10/12 watt LED batten, 2' long with full base of extruded Aluminium body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old unserviceable tube light fitting 1x 18 watt from the site reuse to measured seprately or disposal by credit all as per directed.

S&F LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

Taking down Ceiling fan/ exhaust fan for repair 1200 rpm /300mm sweep of any make, oiling, greasing, cleaning slot, over hauling & replacement of defective nut bolts washer etc including two coat of white synthetic enamal paint with the help of spary gun Complete all as specified and as directed.

Hanging/fixing only ceiling fan/exhuast fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from site.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).

Supply and fixing Exhaust fans steel body, AC single phase, 230 volts of size 450mm sweep with blades, frame and louver complete all as specified and directed by Engineer-in-charge.

M&L in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistranded 4 Sqmm PVC FRLS ISI marked with all insulated unsheathed and including PVC concealed conduit 25mm dia medium grade fittings including 4.00 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continuous earth wire connected to common earth and earth dolly complete all as specified.

M&L in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistranded 6 Sqmm PVC FRLS ISI marked with all insulated unsheathed and including PVC concealed conduit 25mm dia medium grade fittings including 6.00 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continuous earth wire connected to common earth and earth dolly complete all as specified.

S&F single pole and neutral sheet steel, powder coated Double door 12 ways Distribution board for MCB fitted with bus bar, Neutral link, Earth Bar and Din rail. Suitable for use on 240 V, 50 Hz supply.

S&F for 40 to 63 Amp current rating, 240V, 50Hz 10KA 'C' curve SPN Miniature Circuit Breaker(MCB) in MCB DB Complete with connection testing and commissioning all as specified.

S&F for 6 to 32 Amp current rating, 240V, 50Hz 10KA 'C' curve SP Miniature Circuit Breaker(MCB) in MCB DB Complete with connection testing and commissioning all as specified.

M&L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-5 of MES Part-1 fixed for replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing.

S & F sheet metal TPN DBs - DPX3 160 Amp MCCB, 04 way (DPX³ 160 + 12 Module) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete, including necessary reducer lugs all as specified and directed by Engr-in-charge. Make Legrand Cat part No : 5077 50 or equivalent to Schneider

S&F for DPX3 4 Pole, 100A, 415V, 16kA thermal magnetic MCCB including making necessary arrangements for MCCB DBs all as specified and directed by Engineer-in-charge. Make: Legrand, Cat part No: 4202 07 or equivalent to Schneider.

S&F for 40 to 63 Amp current rating, 415V, 50Hz 10KA 'C' curve TPN Miniature Circuit Breaker(MCB) in MCB DB Complete with connection testing and commissioning all as specified.

Supply and lay for replacement of XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing.

Excavation in trenches in any type of soil not exc 1.5m deep and not exc 1.5m wide for laying under ground cable, electric pole and getting out complete all as directed.

Returning, filling in, including spreading, leveling, watering and well rammingin layers not exc 25cm in any type of soil.

Removing excavated material not exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm deep after laying the cable & stretching the cable all as specified and directed.

Supply and lay well-burnt clay bricks sub-class ‘B’, covering as mechanical protection to cable all as specified.

M&L for Light grade Galvanised tube of 40mm dia with all fitting and fixed to wall and ceiling or laid in floor or fixed to pole complete all as specified and directed.

M&L for point wiring for one light/ceiling fan controlled by one switch with 1.5 sqmm (nominal area) PVC insulated, unsheathed, multi stranded, copper conductor cable FRLS including concealed PVC conduit 20 mm dia medium duty ISI marked and sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting,chasing the surface and then making good the same using CM 1:3 complete all as specified and directed. (a) One light point controlled by one switch .

(b) One exhaust point controlled by one switch.

(c) One bell point controlled by one switch

(d) One 3/5 pin socket outlet, 6 Amp on independent board.

(e) One socket outlet 3 Pin, 6 Amps, SP on same board.

M&L for point wiring with 1.5 Sq. mm PVC Insulated unsheathed FRLS multistranded copper conductor, medium grade ISI marked, including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor including surface PVC rigid non metalic conduit for one ceiling fan point controlled by one switch with and also including 1.5 sqmm continious earth wire connected to common earth dolly complete all as specified and directed by engineer-in-charge.

M&L for point wiring for power point controlled by one switch with 2.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLSH including concealed PVC conduit 20 mm dia medium duty ISI marked and sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 2.5 sqmm copper conductor cable FRLSH connected to common earth dolly complete including cutting,chasing the surface and then making good the same using CM 1:3 complete all as specified and directed.

All as per item above but for one light point controlled by two 2-way switches, with cable of 1.5 sqmm size.

Supply and fixing for replacement of single pole one way 10 Amps 1 module modular switch complete all as specified and directed

Supply and fixing for replacement of single pole one way 16 Amps 1 module modular switch complete all as specified and directed

S&F Piano flush type single pole 5 Amps two way Moduler switch all as specified and directed by Engineer-in-charge.

Supply and fixing for replacement of 6 amp-2/3 pin combined, 2 module modular socket complete all as specified and directed by Engineer-in-charge..

Supply and fixing for replacement of 6 amp, 01 module modular Bell push Switch complete all as specified and directed by Engineer-in-charge.

Supply and fixing for replacement of 6 /16 Amps-2/3 pin, flush type modular socket complete all as specified and directed by Engineer-in-charge.

Supply and fixing for replacement of step type, 2 module, 60 watt, 230V modular electronic fan regulator and making all necessary connections complete all as specified and directed by Engineer-in-charge.

S&F for 230V, 50Hz AC single phase, single pole Bell all as specified and as directed by Engineer-in-charge.

Fixing only Slim linear LED lighting fixture 4/5W watt LED batten, with full base of extruded polycarbonate isolated driver, complete making all connection from ceiling rose to fittings including testing complete all as per the direction of Engineer-in-Charge. (As obtained from srl item No 101).

Fixing only decorative ultra slim linear Aluminium Extruded LED lighting fixture 10/12 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling rose to fittings complete all as per directed by Engineer-in-charge. (As obtained from srl item No 101).

fixing only Slim linear LED lighting fixture 20 Watt LED batten, P.F greater than 0.9, input voltage range from 90 Volts to 280Volts with full base of polycarbonate extruded section acting as a heat sink with closed back isolated driver complete making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting complete all as specified and as directed by engineer in charge. (As obtained from srl item No 101).

S&F for replacement of E-Lite LED Curve lighting fixture 05 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fitting complete all as per the direction of Engr-in-Charge.

M&L for sub main wiring with two runs of 4 Sqmm (2x4 sqmm) 1100 volts grade single core FR PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC rigid conduit 25 mm dia ISI marked with all conduit accessories mounting on suface of walls /roofs / ceiling including cutting chasing along with one run of 4 Sqmm (1x4sqmm ) single core FR PVC insulated unsheathed copper conductor cable as earth wire complete all as specified and directed.

M&L for sub main wiring with copper conductor cable (4 runs of cable) multistaranded 6 Sqmm PVC ISI marked with all insulated unsheathed and including PVC concealed conduit 25mm dia medium grade fittings including cutting chasing and 2X6 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and directed.

Supply and fixing 4mm dia GI wire as earth continuty conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or any other indicated situation for loop earthing etc as required.

Supply and fixing Exhaust fans steel body, single phase AC 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and directed

S&F single pole and neutral sheet steel, powder coated Double door 4 ways Distribution board for MCB fitted with bus bar, Neutral link, Earth Bar and Din rail. Suitable for use on 240 V, 50 Hz supply.

S & F for sheet metal VTPN DBs - DPX3 125 MCCB 04 way (Optimum + 12 Module) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete, including connections necessary for reducer lugs all as specified and directed by Engr-in-charge. Make-Indo Asian Cat part No : 811888 or equivalent to Schneider.

S&F for DPX3 3 Pole, 100A, 415V, 16kA thermal magnetic MCCB including making necessary arrangements for MCCB DBs all as specified and directed by Engineer-in-charge. Make Legrand, Cat part No : 4200 05 or equivalent to Schneider.

Rewinding of ceiling fans as obtained from srl item No 116 to original specification and size as directed by Engr-in-Charge.

Taking down existing geyser of any capacity carefully and shifting it to the store and re-fixing the same after completion of B/R works directed by the Engineer-in-Charge.

M&L for 100 Amps, 4 pole, 415V on-load changeover switch in sheet metal enclosure. Make:Havells Cat No: IHBFFE0100. or equivalent in Crompton.

takashdeep traders

M/S GURU DEV BUILDERS

M/S IMTESH BHAT

anil construction co.

joginder singh and sons

KUMAR CONSTRUCTION CO

TULSI RAINA AND SONS