REPAIR TO FLOORING AND PLINTH PROTECTION IN WORK SHOP BLDGS AT D PARK AREA AND CERTAIN ADJACENT AREA UNDER AGE B/R-II UNDER GE PANAGARH

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed.

M & L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and as directed

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 15 thick in CM (1:4) in two layers (5mm thick in CM (1:4) with approved water proofing compound as per manufacturing instraction over backing coat of 10mm thick in CM (1:4)) on brick work or concrete surfaces finished fair & even. (Note:- WPC will be measured and paid separately)

Supply only integral Liquid water proofing compound.

M & L for preparation of new painted surface of concrete or bick or stone surfaces etc of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed.

M & L for preparation of old painted surface of concrete or bick or stone surfaces etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L 75 mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L 40 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in receiving floor Finishes complete all as specified and directed.

M&L 100 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in receiving floor Finishes complete all as specified and directed.

M & L for cement concrete 100mm thick 1:4:8, Type D-2 (Using 40 mm graded stone aggregates) as in sub base for flooring etc complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, in mass concrete complete all as spcified.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

Material and labour for 25 mm thick chequered cement concrete tiles of approved size,set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as per specification.

M & L for TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L out door Vitrified parking tile of size 40 x 40 cmx 8-10 mm thick of approved size,set, jointed and pointed using with grey cement and pigment in floor,pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick sreed bed or bedding layer in CM 1:6 complete all as specified and directed.

M & L for screed or bedding layer 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified and as directed.

M & L for Rendering 10mm thick in cement mortar 1:4 finished even and fair on vertical surfaces on walls complete all as specified and as directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all complete all as specified and directed.

M&L for Virified Ceramic tiles 8 mm thick, Light Shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Virified Ceramic tiles 8 mm thick, Light Shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Machine cut kota stone slab flooring 16mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L Kota stone slab 16mm thick in riser of steps, skirting, dado & pillar over plaster & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L green Marble work 16mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana Adanga complete all as specified and as directed.

M&L for Vitrified Ceramic tiles fully body double charged 8-9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including screed bed of 20mm thick in 1:4 cement mortar, complete all as specified and as directed.

M&L for 75 mm thick cement concrete M10 (Nominal Mix) with 40mm graded crushed aggregate finished even and fair laid to a slope of 1 in 12, laid in alternate bays, each bay not exceeding 3 m length with joint filled with bituminous mastic filling comprising a mixture of 1 part of heated Industrial bitumen 85/25 grade and two parts of heated sand complete all as specified.

Taking down the wooden shutter/ window/ iron gate area exc 1 Sqm but n. exc 2Sqm and refixing in position after necessary welding of length n. exc 2.5cm (thickness of metal to be welded is exc 6mm but n. exc 9mm) complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Supply and laying of PVC underground drainage sewer system pipe bearing 160 mm dia minimum thickness of pipe 4mm thick of pressure rating SN 4KN/Sqm laid in trenches and joined with cement solvent including jointing with couplar bend tee as per site requirement complete all as specified and directed by Engr-in-Charge.

M&L Cement concrete 1:3:6, type C-1(using 20mm graded stone aggregate) in surface channels and drains and manholes complete all as specified and directed by Engr-in-Charge.

M/S SEHGAL CONSTRUCTION (BID ID -3365750)

M/S FM Enterprise (BID ID -3369501)