GE/H/T-56 / 2025-26 SPECIAL REPAIR WORK IN THE PAEDIATRIC WARD AND SPECIAL REPAIR / REPLACEMENT OF GEYSER AND CEILING FANS AGAINST BER AT AHRR UNDER GE E/M RR HOSP DELHI CANTT-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantle Stone slabs and tiles of any description or thickness in floors, aprons etc. laid b

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

Demolition of un-reinforced cement concrete in ground floors and pavings in any position thickness. (Below or above ground level) and removing rubbish off premisses n exc 500 m complete all as specified

M & L for 18 to 20mm thick granite tiles of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms, steps, crumple joints in CM (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bad or backing layer in CM 1:4 (incl moulding of edges) complete all as directed..

M&L 15mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes all as specified.

M & L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

M&L for 10 mm thick rendering as backing coat for wall tiles in CM 1 : 4 without using extra cement finished and smooth all as specified.

M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick,over and including 10 mm thick cement palster in cm 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

M&L 3.2mm thick lead glass radiation resistence for x ray radiation fixing with all fitings and fixture complete all aspecified

M&L for Vitrified Ceramic tiles dark shade 9-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed.

Dotto same as item No.11 but in vertical surfaces complete all as spd and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n. exc 1.50 Sqm each.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each.

S&F factory made single extruded WPC (Wood polymer composite) soild door frame of size 65mmx100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder/rice husk/weat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS scerws having min frame density of 750 Kg/cum, screw withdrawl strenght of 2200 N (Face) 1100N (Edge) min compressive strenght of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire retrandant complete all as specified and directed

S&F factory made single extruded WPC (Wood polymer composite) soild plain flush door shutter of 30mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder/rice husk/weat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS scerws having min frame density of 750 Kg/cum, screw withdrawl strenght of 2200 N (Face) 1100N (Edge) min compressive strenght of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire retrandant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed countersunk SS screw complete all as specified and directed.

Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories

S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F in repair toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as directed. Make : Modiguard / Saint Gobin / Triveni float glass

M&L sensor for operating toughened glass sliding door with complete fittings and sliding accessories complete all as specified and directed.

S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed.

S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed.

S& F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

M&L for complete removal of old treatment on surfaces of walls through electrically operated grinder using sand paper for preparation of old decorated plastered surfaces of wall and applying two coat of oil emulsion distemper over one coat wall care putty complete all as specified and directed by Engr-in-Charge

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L rendering 15mm thick on CM 1:6 fair faces of brick work or concrete surface to fair and even without using extra cement complete all as specified and as directed

M&L for preparation of newly plastered surfaces and applying Two coat wall care putty to achieve smooth surface by sanding through electrically operated grinder using sand paper followed by two coats of distemper oil emulsion over one coat of primer on wall surfaces complete all as specified.

Taking up or down tubing GI 15 mm dia incl all fittings complete all as specified

S & F 15mm bore medium grade concealed galvanised steel water tubing with all fittings fixed to wall or laid in floors, with and including for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc.

S&F of in repair vitreous china wash basin, white colour, flat back type, of approx size 580 x 450 mm (for hospital use) including waste coupling, wall bracket, of suitable size etc, complete all as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as directed..

S&F in repair 10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor.

S&F in replacement of 15mm dia PVC connection 45 cm (PVC), complete all as directed.

M&L in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair of 15mm Bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated, complete all as directed.

S&F in replacement of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified.

S&F in repair Toilet paper holder, vitreous China, box type fixed to walls with chromium plated (CP) brass screws

S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in replacement of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engr-in-Charge

S&F in replacement of PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as directed.

S&F in repairs for Cast iron floor trap of 75 mm outlet plain with grating including jointing to waste pipe in run lead fixed in cement mortar complete all as specified.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required.

S&F 100mm bore cast iron soil waste and vent pipe (sand cast pipes)if pipe are epoxy coated inside & out side in any length with or without ears with cement joints laid in floors or in trenches all as specified.

S&F cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches, bore of pipe 75mm all as specified.

S&F for 100mm bore cast iron soil waste and vent pipes (sand cast pipes) if pipe are epoxy coated inside & out side in any length fixed with cement joints fixed to walls, complete all as specified.

S&F for 75mm bore cast iron soil waste and vent pipes (sand cast pipes) if pipe are epoxy coated inside & out side in any length with cement joints fixed to walls, complete all as specified.

S&F for 100mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches all as specified

S&F for 75mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches all as specified

S & F in repair of 100mm dia stack clamps made out of 50mm wide and 3 mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as directed.

S & F in repair of 75mm dia stack clamps out of 50mm wide and 3 mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on brick or concrete surfaces using integral water proofing compound as per manufacture's instructions as in sunken floor complete all as specified and directed. Note: WPC is deemed to be included in this items rate.)

M&L for sealing of pipe penetration of toilets core cutting & sunken slab treatment in following stages:- Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty Sikagrade-694F (I) ,yield : 0.6ltr/kg suitable for submerged condition having compressive strength of 40N/mm²(1day) according to IS 9162-1979 on pipe penetration surface. The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joints to concrete penetration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementtitious coating system as Top coat : Sika Top Seal -107@ 1.5kg/m² over reinforcement : Sika Fab-1 over base coat : Sika® Seal Tape-S special tape etc all as specified and directed. System should have compressive strenght:20N/mm²: bond strength :2.0N/mm² complete all as specified and directed. Note : Entire work shall be carried out through Manufacturar or his authorised representative.

M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring with smooth surface finish complete all as specified and directed.

S&F PVC 18/19mm thick PVC moulded solid board ,one side prelaminated for cabinets boxes shutters,etc with shelf and shutters full size fitted under/above kitchen cooking platform and other platform complete all as direction of the Engr-in charge and the manufacturer complete all as specified and directed by Engr-in-Charge

S&F soft closing clip on hinge, full / half overlay type, of stainless steel, all as specified.

S&F multipurpose lock 50mm size with triple keys, suitable for cup board door/drawer , complete all as specified.

S&F of cup board / drawer knob of stainless steel with matt finish fixed with screw, complete all as directed.

S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as directed.

M & L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

S&F in repair zebra blinds made out of fabric cloth or as required of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed .

Removal of demolished material or soil to a distance n.exc 500M and depositing where directed at a level n.exc. 1.5 M above the starting point.

S&F aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and including panel of ACP sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangement for bottom and top member of aluminium frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed by Engineer-in-Charge (Note : Cost of ACP sheet or prelaminated board and sheet glass shall deemed to be included in the rate quoted for this item )

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, fillets etc & existing electrical wiring, and removal of debries from site complete all as specified & directed.

Supply and fix Factory made wood grain solid PVC moulded door with particle board core shutter 28 to 30mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site as per specification complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F 100 mm long butt hinges medium weight mild steel alloy with galvanised .

S&F aluminium Deco grill with powder coating (minimum thickness of powder coating 50 micron), 7.5 mm size DG-102, fixed to E/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes, complete all as specified and directed.

S&F of 125 mm long Aluminium handles, cast type, anodised complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, drawn through and including concealed, rigid non-metallic PVC Conduit of minimum 20 mm dia or higher as per site requirement with all fittings such as GI metal flush box suitable for modular switches / sockets / fan regulators with cover plates, blanking plates, brass / cadmium plated screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

One light/fan/bell/exhaust fan point controlled by one switch.

One 3 Pin socket outlet 5 Amps on Independent board.

One 3 Pin socket outlet 5 Amps on same board.

All as per srl item No. 75 here-in-before but with 2.5 sq mm FRLS copper earth wire for 15 Amp power point.

S & F Modular Switch 1 way 16 A, 1 Module complete all as specified and directed

S & F Modular Socket 6 / 16 A - 2/3 Pin combined 2 module complete all as specified and directed

S & F Modular Switch 1 way 6 /10 A, 1 Module complete all as specified and directed.

S & F Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module complete all as specified and directed.

S & F Modular fan regulator step type, 100W 2 Module complete all as specified and directed.

S & F of Ceiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed.

S & F in replacement of Modular AC/Geyser Box, power socket with top 240 volts AC complete with one SP MCB, 20 amps concealed / flush to wall surface complete all as specified and directed.

S & F of LED tube light fitting 20 watt (CW), 4 feet long in extruded aluminium batten with high efficient LEDs available in milky diffuser and Colour Rendering Index (CRI>70), IP20,Luminaire system efficacy of > 120 lumen/watt, along with inbuilt surge protection upto 3KV correlated Colour Temperature (CCT- 5700K to 6500K), CRI>80 ,PF>0.95 and Voltage rated 220V to 240V complete all as specified and directed.

Supply and fix in repair of recessed 36 W LED 2X2 panel backlit type only. Luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have CRI ≥ 80 and CCT 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire system efficacy of ≥ 120 lumen/watt. The luminaire shall have life class of min 50,000 burning hrs. The electronic driver used shall have a power factor ≥0.95 . Fixture must have voltage range protection from 140-270V along with inbuilt surge protection of min 4KV. The luminaire shall pass Insulation Resistance test @ ≥ 2MΩ . The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires. Manufacturer shall have inhouse lab approved by NABL as per 2019 standards.

Taking down unserviceable sub main wiring of aluminium any type with earth wire and making good disturbed surfaces of wall/ floor or roof etc and applying putty complete all as specified and directed.

M & L Sub main wiring with 2 x 4 Sqmm and 1 x 4 sqmm (for earth) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including regid PVC conduit 20 mm dia or higher, complete with all conduit accessories and connected with thimble from main DB / Panel to sub DB complete all as directed. Note :1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire (for earth) and 1 mtr PVC conduit pipe will be measured as one unit.

S & F in replacement Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface/recess mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed.

S & Fof MCB, SPN, 40 Amps capacity, 240V, 10 KA 50 HZ C curve complete all as specified and directed.

S & F of MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed

Take down water heater storage type of any capacity carefully and refixing complete with new fasteners and all accessories complete all as directed

Taking down carefully ceiling / exhaust / wall fan and refixing of any size sealing cable end, dismantling blades & removing fan and blades deposited to MES store complete all as directed.

Taking down carefully unsv ceiling fan, Geysers of any size, dismantling blades etc and depositing to MES store complete all as directed.

Supply, fixing and testing BLDC ceiling fan, white / ivory colour 1200mm sweep, 5 star rated, 230 volts, single phase, 50 Hz, min air delivery 220 m3 / min, copper winding, Class 'B' insulation, suitable for electronic capacitor regulator, complete with adequate size of clamp, connecting up 3 core sheathed copper conductor cable from ceiling rose or connector to fan complete with 2 year warranty all as specified and directed. The BLDC fan should have compatible operation with Electronic Regulator.

SITC of Smart Fan Rod (Anti Suicidal Fan Rod) for ceiling fans in the following sizes in white / ivory colour, thickness of rod = 1.84 (+/- 0.05) mm on zinc plated MS Pipe with zinc plated spring mechanism, MSME tested for 15 Kg weight bearing capacity and breaking at impact load of 22 kg+, the fan down rod opens from its centre and spring hidden in pipe, expands to land person on ground safely complete all as specified and directed for the following sizes;-

(a) 12" long

(b) 18" long

(c) 24" long

Supply and fix electric water heater, 25 Ltr Capacity, Horizontal Type, suitable for low ceiling fixing, storage type steel / ABS body with suitable type of inner tank and heating element upto 2 KW, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes (SS) brided type etc complete with fixing arrangement including grouting of nuts, bolts, fastners of suitable size, electric connection etc all as specified and directed. Make : Racold / Havells / AO Smith / Dyson / Siemens / BOSCH. Note : Contractor will submit guarantee/warranty certificate from manufacturer

Supply and fix electric water heater, 15 Ltr Capacity, Horizontal Type, suitable for low ceiling fixing, storage type steel / ABS body with suitable type of inner tank and heating element upto 2 KW, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes (SS) brided type etc complete with fixing arrangement including grouting of nuts, bolts, fastners of suitable size, electric connection etc all as specified and directed. Make : Racold / Havells / AO Smith / Dyson / Siemens / BOSCH. Note : Contractor will submit guarantee/warranty certificate from manufacturer

Supply and fix electric water heater, 6 Ltr Capacity, instant type, suitable for scrub station / hand wash basin ABS / steel body with suitable type of inner tank and heating element upto 3 KW, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes (SS) brided type etc complete with fixing arrangement including grouting of nuts, bolts, fastners of suitable size, electric connection etc all as specified and directed. Make : Racold / Havells / AO Smith / Dyson / Siemens / BOSCH. Note : Contractor will submit guarantee/warranty certificate from manufacturer

M & L for Writing MES No. of Ceiling Fans & Air Geysers by using black synthetic enamel paint / engraving tool / stickers etc as per approved colour / size given by Engr-in-Charge complete all as specified and directed.

SAGAR ENTERPRISES (BID ID -3460904)

ACR ENTERPRISES (BID ID -3458219)

OMVIN ENTERPRISES LLP (BID ID -3453172)

GLIBS CONSTRUCTION (BID ID -3461230)

SHALIMAR INTERIORS (BID ID -3456566)

Verma Enterprises (BID ID -3461622)

Shivam Firetech Engineers (BID ID -3456368)

VIJAY KUMAR GUPTA (BID ID -3456525)

sony engineering works (BID ID -3455006)